
Roof aerator D160 | rotary | for flat and bitumen roofs | ABS | black
Code: A160BLARotary roof aerator D160 made of ABS plastic. Removes condensate and water vapour from under the roofing of flat roofs and roofs covered with bitumen shingles.
-
Roof aerator D160
A roof aerator ventilates the space under the roofing: it removes vapour and condensate that would otherwise dampen the insulation. Suitable for flat roofs (bitumen, PVC, TPO, EPDM membrane) and pitched roofs with soft roofing.
Key point
Dry insulation means less mould, fungus and heat loss, and longer-lasting roofing. The aerator works passively, without electricity; the head rotates on ball bearings. ABS plastic does not rust and is unaffected by moisture, so it is also suitable for aggressive environments – livestock farms, damp rooms, coastal areas.
Connection diameterD160 / 125 mmTypeRotary aeratorBearingsballColourBlack⚠ For ventilation only
The deflector is intended for ventilation ducts only – to extract humid and warm air. Do not install it on flues of stoves, fireplaces, sauna heaters or boilers: hot flue gases and acidic condensate will damage it, and there is a risk of fire and carbon monoxide (CO) poisoning.
How it works
- Installed in the upper part of the roof through an opening in the roofing.
- The wind spins the head and extracts humid air from under the roofing.
- Drier insulation retains heat better.
Technical specifications
Product type Rotary roof aerator Composition 3 components Overall height 550 mm Width × depth 440 × 440 mm Mounting opening diameter 125 mm Outer / inner diameter 160 / 125 mm Material ABS plastic Rotating assembly Ball bearings Weight 1.75 kg (gross 2.00 kg) Colour Black Where it is used
- Flat roofs with bitumen, PVC, TPO, EPDM membrane
- Pitched roofs covered with bitumen shingles
- Residential, commercial, industrial buildings
- New and renovated roofs
Installation diagram: common mistakes and the correct way
☝ Click the diagram to open an enlarged version.⚠ The diagram is for guidance only and may contain inaccuracies. Before installation, check it against the manufacturer's instructions and the roofing requirements.
Responsibility for installation lies with the qualified specialist performing it. UAB „Elektrotechnikos sprendimai“ is not liable for installation or possible errors.☝ Elsprendimai.eu recommends:- For a room ventilation duct – rotary deflector D160 with an insulated outlet.
✓ Pros
- Dries the insulation – less mould and heat loss
- Works without electricity
- Ball bearings
- ABS does not rust
→ Limitations
- The number and layout must be matched to the roof area
- Must be installed with a tight seal in the roofing
⚠ Installation and maintenance
- Install in the upper part of the roof.
- Seal according to the roofing manufacturer's instructions.
- Roof work is work at height.
FAQ
What is a roof aerator for?
To remove vapour and condensate from under the roofing – so that the insulation stays dry.
Which roofs is it suitable for?
Flat roofs (bitumen, PVC, TPO, EPDM) and pitched roofs with soft roofing.
Does it need electricity?
No – it is wind-driven.
In short
Rotary roof aerator D160 – dry insulation and a longer-lasting flat or soft-covered roof. Unsure about the size or roofing? Send us the duct diameter and roof type – we will help you choose.
Phone: +370 620 72733
E-mail: info@elsprendimai.euIllustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.ManufacturerPlastic deflector - made from high-quality ABS plastic and has a longer service life. Resistant to oxidation, moisture, sunlight, and harsh mechanical damage.
Operates easily and quietly.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Price 41.12 € VAT incl.( 33.98 € VAT excl. )Fan with backdraft damper | D100 | 230V | with controller | 155x155x101mm | plastic | whiteCode: 16191Price 32.67 € VAT incl.( 27.00 € VAT excl. )Price 31.46 € VAT incl.( 26.00 € VAT excl. )Inspection hatch-door with push-to-open mechanism | 400x500x15mm | aluminum profile | RDL4050BCode: 12120Price 69.41 € VAT incl.( 57.36 € VAT excl. )Flexible aluminum air duct | for ventilation | ventilation systems | D160mm | 3,15m | silver | LAO160UCode: 18721Price 8.62 € VAT incl.( 7.12 € VAT excl. )Price 33.58 € VAT incl.( 27.75 € VAT excl. )
































