Products catalog

Home/Product Catalog/HVAC control solutions for heating and ventilation/Deflectors | ventilation | ventilation systems/Plastic deflectors | for ventilation systems
  • New item   Rotary deflector D160 with flashing | for bitumen roofing | kit with insulated outlet | ABS | green
    New item   Rotary deflector D160 with flashing | for bitumen roofing | kit with insulated outlet | ABS | green 1
    New item   Rotary deflector D160 with flashing | for bitumen roofing | kit with insulated outlet | ABS | green 2

    Rotary deflector D160 with flashing | for bitumen roofing | kit with insulated outlet | ABS | green

    Code: S160GR
    Inquire about this item
    Price 156.60 € VAT incl.
    ( 129.42 € VAT excl. )
    Want another price? Suggest yours!

    Kit for bitumen roofing: roof flashing 250×160 mm, insulated ventilation outlet 500×160 mm and rotary deflector D160 with ball bearings. Colour – green.

  • Product description

    Rotary deflector D160 kit for bitumen roofing – green

    A complete kit for a ventilation outlet through the roof: roof flashing (base) for bitumen roofing, insulated ventilation outlet and rotary deflector. All parts needed for installation – in one box.

    Key point

    The insulated outlet reduces heat loss and the risk of condensation; the deflector rotates on ball bearings. According to the manufacturer, extraction reaches up to 71 m³/h at a wind speed of 3 m/s. ABS plastic does not rust and is unaffected by moisture, so it is also suitable for aggressive environments – livestock farms, damp rooms, coastal areas.

    Connection diameter
    D160 / 125 mm
    Roofing
    Bitumen
    Bearings
    ball
    Colour
    Green

    ⚠ For ventilation only

    The deflector is intended for ventilation ducts only – to extract humid and warm air. Do not install it on flues of stoves, fireplaces, sauna heaters or boilers: hot flue gases and acidic condensate will damage it, and there is a risk of fire and carbon monoxide (CO) poisoning.

    How it works

    • The roof flashing is fixed to the roofing and sealed.
    • The insulated ventilation outlet is inserted through it, with a Ø125 mm duct connected from below.
    • On top – a D160 rotary deflector that extracts air without electricity.
    operating principle and estimated air extraction | elsprendimai.eu
    ☝ Click the diagram to open an enlarged version.

    Estimated air extraction

    According to the manufacturer – up to 71 m³/h at 3 m/s wind.

    Technical specifications

    Product type Roof ventilation kit with rotary deflector
    Roofing Bitumen
    Kit contents Roof flashing 250×160 mm, insulated outlet 500×160 mm, deflector 160 mm
    Outer deflector diameter 160 mm
    Inner connection diameter 125 mm
    Extraction up to 71 m³/h at 3 m/s wind (manufacturer data)
    Material ABS plastic, UV-resistant
    Rotating assembly Ball bearings
    Weight ~3 kg
    Colour Green

    Where it is used

    • Ventilation of detached houses and homesteads
    • Bathrooms, kitchens, laundry rooms, boiler rooms
    • Garages and outbuildings
    • New construction and renovation

    Installation diagram: common mistakes and the correct way

    Rotary deflector D160 kit for bitumen roofing – green – installation diagram: wrong and right | elsprendimai.eu
    ☝ Click the diagram to open an enlarged version.
    ⚠ The diagram is for guidance only and may contain inaccuracies. Before installation, check it against the manufacturer's instructions and the roofing requirements.
    Responsibility for installation lies with the qualified specialist performing it. UAB „Elektrotechnikos sprendimai“ is not liable for installation or possible errors.
    ☝ Elsprendimai.eu recommends:

    ✓ Pros

    • Everything in the kit – no need to match parts
    • Insulated outlet – less condensate
    • Ball bearings
    • ABS does not rust – suitable for aggressive environments
    • Manufacturer-stated capacity – up to 71 m³/h

    → Limitations

    • Intended only for bitumen roofing – for other roofing choose a different kit
    • Capacity depends on the wind
    • Not suitable for flues

    ⚠ Installation and maintenance

    • Check that the kit matches your roofing.
    • Seal the roof flashing according to the roofing manufacturer's instructions.
    • The outlet must be vertical – level it before final tightening.
    • Roof work is work at height.

    FAQ

    What is included in the kit?

    Roof flashing, insulated ventilation outlet and rotary deflector D160.

    What duct diameter can be connected?

    The inner connection diameter is 125 mm; for a Ø100 duct use an adapter.

    How much air does it extract?

    According to the manufacturer – up to 71 m³/h at 3 m/s wind.

    Is it suitable for aggressive environments?

    Yes – ABS plastic does not rust.

    In short

    Rotary deflector D160 kit for bitumen roofing (green) – a complete ventilation outlet through the roof in one box, with an insulated outlet and ball bearings. Unsure about the size or roofing? Send us the duct diameter and roof type – we will help you choose.

    Phone: +370 620 72733
    E-mail: info@elsprendimai.eu

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.

  • Subscribtion to new arrivals

    privacy policy

    Information