
Signal | indicator lamp | red | 10mm | 12V
Code: ES-XD10-3RPrice 1.21 € VAT incl.( 1.00 € VAT excl. )The red signal indicator light with a 10 mm diameter and 12V voltage is an excellent solution for clearly displaying a specific system status or signaling the operation processes of a device. This light is commonly used in industrial and household equipment, where it is necessary to visually indicate certain operations, such as power status, errors, or other important information. The light has a plastic housing, making it lightweight and resistant to external influences.
-
Signal | indicator lamp | red | 10mm | 12V
Small indicator lamp for a Ø 10 mm hole, colour – red, operating voltage 12 V. Suitable for compact control stations, vehicle and battery systems and low-voltage automation.
Key idea:
The lamp is connected directly to the 12 V circuit whose status it shows. Its voltage must match the circuit: on 24 V or 230 V it will burn out. Typical colour meaning: emergency, fault.Mounting hole
Ø 10 mmVoltage
12 VColour
redHousing
plasticFixing
nut from the rearConnection
2 flat terminalsHow it works
The lamp is fitted into a Ø 10 mm hole and tightened with a nut from the rear.
When 12 V is applied to the terminals, the lamp lights up and shows the circuit status.
The lamp is an indication element only – it does not switch anything.
What are the benefits? The small Ø 10 mm hole lets you fit several indicators where a 22 mm lamp does not fit.Technical specifications
Product type Signal indicator lamp Mounting hole Ø 10 mm Operating voltage 12 V Colour red Housing material plastic Fixing nut from the rear Connection 2 flat terminals (soldered or with connectors) Purpose status and voltage indication in 12 V circuits Main functions
- Shows 12 V circuit status or voltage presence
- Small Ø 10 mm mounting hole
- Lightweight plastic housing
- Simple nut mounting
Where is it used?
- Compact control stations
- Vehicles and special machinery
- 12 V battery and solar systems
- Low-voltage automation and equipment
Use by need
For the installer. Ø 10 mm hole and 12 V – quick status indication in a small control station.For equipment builders. Several colours let you mark different statuses with lamps of the same size.For home users. Suitable for 12 V projects: trailer, camper or workshop panel.Practical use
In a 12 V battery system the lamp is connected via a switch or relay contact and shows that the circuit is on. Typical meaning of this colour: emergency, fault.Pros- Small Ø 10 mm hole
- Simple 12 V connection
- Low cost
Cons- 12 V only – not suitable for 24 V or 230 V circuits
- No IP rating stated – intended for dry locations
Safety and installation notes
- Check the voltage before connecting – it must be 12 V.
- Connect with the supply switched off.
- Protect the 12 V circuit with a fuse.
- Label what the lamp indicates.
Quick selection guide
Ø 10 mm12 VredplasticFAQ
⚡ Can the lamp be connected to 24 V?
No, it is designed for 12 V. For 24 V or 230 V circuits choose lamps of the matching voltage.⚡ What hole size is needed?
A Ø 10 mm hole.⚡ How is it fixed?
It is fitted into the hole and tightened with a nut from the rear.⚡ Where is it suitable?
Compact control stations, vehicles and 12 V battery systems.⚡ Are larger lamps available?
Yes, the 22 mm indicator lamp group has lamps from 12 to 400 V.Signal | indicator lamp | red | 10mm | 12V
Indicator lamp Ø 10 mm, 12 V, colour – red – simple status indication for small control stations and 12 V systems. Need indication selected for a whole control station? Send us the diagram – we will select the products and send a quote.
Published: 2026-11-07 · Data according to the manufacturer’s marking: 2026-11-07
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Flush push button | 22 mm | 1NO | green | metal | non-illuminated | IP40 | non-latching | Promfactor Baltic | FP PCP grCode: FP PCP grFlush push button Ø 22 mm, 1NO, green, IP40, Promfactor Baltic FP PCP gr. For control circuits: AC-15 6 A / DC-13 0.6 A, Ui 660 V.
Price 2.41 € VAT incl.( 1.99 € VAT excl. )Crane control panel | with 4 buttons | 5A | 120–400V | IP54Code: BPU10-4Button control panels are designed for switching electrical control circuits of lifting mechanisms. The sealed IP54 enclosure is made of heat-resistant ABS plastic with built-in buttons. A protective gland is provided to seal the cable entry, and a sealing gasket is installed between the enclosure and the panel.
The buttons meet the "CE" standard requirements in terms of design and technical specifications.
The remote control panels have passed certification tests and have received serial production conformity certificates.
Available with 2, 4, or 6 buttons.
The housing is made of non-flammable ABS plastic.
The cable entry includes a protective gland that prevents moisture and dust from entering the housing.Price 20.57 € VAT incl.( 17.00 € VAT excl. )Mushroom push button STOP | 22 mm | 1NC | red | IP40 | latching | Promfactor Baltic | FP CM rCode: FP CM rMushroom push button STOP Ø 22 mm, 1NC, red, IP40, Promfactor Baltic FP CM r. For control circuits: AC-15 6 A / DC-13 0.6 A, Ui 660 V.
Price 4.25 € VAT incl.( 3.51 € VAT excl. )Selector switch | 22 mm | 1NO | 2 positions 0-1 | maintained | black | metal | IP40 | Promfactor Baltic | FP Rec2 blCode: FP Rec2 blA knob selector switch for choosing the operating mode, e.g. MANUAL–0–AUTO or ON–OFF.
Price 3.21 € VAT incl.( 2.65 € VAT excl. )











