Products catalog

  • Signal | indicator lamp | yellow | 10mm | 12V

    Code: ES-XD10-3Y

    The yellow signal indicator light with a 10 mm diameter and 12V voltage is an excellent solution for visually indicating a specific system status or notifying about the device's operational processes. This light is commonly used in industrial and household devices to show that the system is working but may require attention or certain actions to be taken. The light has a plastic housing, making it lightweight and resistant to external impacts.

  • Signal | indicator lamp | yellow | 10mm | 12V

    Small indicator lamp for a Ø 10 mm hole, colour – yellow, operating voltage 12 V. Suitable for compact control stations, vehicle and battery systems and low-voltage automation.

    Key idea:
    The lamp is connected directly to the 12 V circuit whose status it shows. Its voltage must match the circuit: on 24 V or 230 V it will burn out. Typical colour meaning: warning, abnormal condition.
    Mounting hole
    Ø 10 mm
    Voltage
    12 V
    Colour
    yellow
    Housing
    plastic
    Fixing
    nut from the rear
    Connection
    2 flat terminals

    How it works

    The lamp is fitted into a Ø 10 mm hole and tightened with a nut from the rear.

    When 12 V is applied to the terminals, the lamp lights up and shows the circuit status.

    The lamp is an indication element only – it does not switch anything.

    What are the benefits? The small Ø 10 mm hole lets you fit several indicators where a 22 mm lamp does not fit.

    Technical specifications

    Product type Signal indicator lamp
    Mounting hole Ø 10 mm
    Operating voltage 12 V
    Colour yellow
    Housing material plastic
    Fixing nut from the rear
    Connection 2 flat terminals (soldered or with connectors)
    Purpose status and voltage indication in 12 V circuits

    Main functions

    • Shows 12 V circuit status or voltage presence
    • Small Ø 10 mm mounting hole
    • Lightweight plastic housing
    • Simple nut mounting

    Where is it used?

    • Compact control stations
    • Vehicles and special machinery
    • 12 V battery and solar systems
    • Low-voltage automation and equipment

    Use by need

    For the installer. Ø 10 mm hole and 12 V – quick status indication in a small control station.
    For equipment builders. Several colours let you mark different statuses with lamps of the same size.
    For home users. Suitable for 12 V projects: trailer, camper or workshop panel.

    Practical use

    In a 12 V battery system the lamp is connected via a switch or relay contact and shows that the circuit is on. Typical meaning of this colour: warning, abnormal condition.
    Pros
    • Small Ø 10 mm hole
    • Simple 12 V connection
    • Low cost
    Cons
    • 12 V only – not suitable for 24 V or 230 V circuits
    • No IP rating stated – intended for dry locations

    Safety and installation notes

    • Check the voltage before connecting – it must be 12 V.
    • Connect with the supply switched off.
    • Protect the 12 V circuit with a fuse.
    • Label what the lamp indicates.
    Quick selection guide
    Ø 10 mm12 Vyellowplastic

    FAQ

    ⚡ Can the lamp be connected to 24 V?
    No, it is designed for 12 V. For 24 V or 230 V circuits choose lamps of the matching voltage.
    ⚡ What hole size is needed?
    A Ø 10 mm hole.
    ⚡ How is it fixed?
    It is fitted into the hole and tightened with a nut from the rear.
    ⚡ Where is it suitable?
    Compact control stations, vehicles and 12 V battery systems.
    ⚡ Are larger lamps available?
    Yes, the 22 mm indicator lamp group has lamps from 12 to 400 V.

    Signal | indicator lamp | yellow | 10mm | 12V

    Indicator lamp Ø 10 mm, 12 V, colour – yellow – simple status indication for small control stations and 12 V systems. Need indication selected for a whole control station? Send us the diagram – we will select the products and send a quote.

    Published: 2026-11-07 · Data according to the manufacturer’s marking: 2026-11-07

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Crane control panel | with 4 buttons | 5A | 120–400V | IP54
    Code: BPU10-4

    Button control panels are designed for switching electrical control circuits of lifting mechanisms. The sealed IP54 enclosure is made of heat-resistant ABS plastic with built-in buttons. A protective gland is provided to seal the cable entry, and a sealing gasket is installed between the enclosure and the panel.

    The buttons meet the "CE" standard requirements in terms of design and technical specifications.

    The remote control panels have passed certification tests and have received serial production conformity certificates.
    Available with 2, 4, or 6 buttons.
    The housing is made of non-flammable ABS plastic.
    The cable entry includes a protective gland that prevents moisture and dust from entering the housing. 

    Price 20.57 € VAT incl.
    ( 17.00 € VAT excl. )
    Selector switch | 22 mm | 1NO | 2 positions 0-1 | maintained | black | metal | IP40 | Promfactor Baltic | FP Rec2 bl
    Code: FP Rec2 bl

    A knob selector switch for choosing the operating mode, e.g. MANUAL–0–AUTO or ON–OFF.

    Price 3.21 € VAT incl.
    ( 2.65 € VAT excl. )
    Mushroom push button STOP | 22 mm | 1NC | red | IP40 | latching | Promfactor Baltic | FP CM r
    Code: FP CM r

    Mushroom push button STOP Ø 22 mm, 1NC, red, IP40, Promfactor Baltic FP CM r. For control circuits: AC-15 6 A / DC-13 0.6 A, Ui 660 V.

    Price 4.25 € VAT incl.
    ( 3.51 € VAT excl. )
    Flush push button | 22 mm | 1NO | green | metal | non-illuminated | IP40 | non-latching | Promfactor Baltic | FP PCP gr
    Code: FP PCP gr

    Flush push button Ø 22 mm, 1NO, green, IP40, Promfactor Baltic FP PCP gr. For control circuits: AC-15 6 A / DC-13 0.6 A, Ui 660 V.

    Price 2.41 € VAT incl.
    ( 1.99 € VAT excl. )
  • privacy policy

    Information