Smart electromechanical door lock | bolt lock | 12V DC | automatic locking

The system is not limited to simple electrical latch release. It features automatic lock status monitoring, incorrect operation correction and automatic relocking. This allows the lock to be used in residential buildings, offices, commercial premises and other access control systems.

If the lock is unlocked but the door is not opened, the lock automatically relocks after approximately 5–8 seconds. This function is particularly useful for shared entrances where it is important that the door does not remain unlocked after an unused unlocking signal.

Although the lock mechanism is designed for different door opening directions, the specific door, frame, installation position, lock bolt position and the supplied strike plate must be evaluated before installation.

The manufacturer's catalogue specifies approximately 25mA standby current and an unlocking current of less than 350mA. These parameters allow the lock to be integrated into a properly selected low-voltage door control power supply system.

• Automatic locking after approximately 5–8 seconds if the door is not opened after unlocking.
• Fast unlocking – the manufacturer's catalogue specifies an operating time of less than 1 second.
• Single mechanical cylinder for additional mechanical operation.
• Suitable for left- and right-hand doors.
• Suitable for inward- and outward-opening doors.
• Compatible with intercom and access control systems.
• 25mA standby current reduces continuous power consumption.
• More than 500,000 cycles declared mechanism service life.
• Iron body and lock bolt provide a robust mechanical construction.
• Nickel-plated finish provides the metal body with a neat finished surface.

• External power supply required: the lock is not a standalone battery-powered version.
• Mechanical installation required: the position of the lock and strike plate must be properly aligned.

The lock is installed on an office or apartment building entrance door and connected to a 12V DC power supply and an intercom or access control controller. When the user presses the unlock button, the controller sends a signal to the lock and the electromechanical mechanism releases the door in less than 1 second. If the door is not opened after unlocking, the lock automatically returns to the locked state after approximately 5–8 seconds.

The lock supply voltage is 12V DC.

The unlocking current is less than 350mA.

The specified standby current is approximately 25mA.

The unlocking time is less than 1 second.

Yes. If the door is not opened after electrical unlocking, the lock automatically returns to the locked state after approximately 5–8 seconds.

Yes. The lock is a single-cylinder version.

Yes. The mechanism is suitable for both left- and right-hand doors.

Yes. It is compatible with intercom and access control systems provided that their electrical control parameters meet the lock requirements.

The lock body dimensions are 130x105x39mm.

Approximately 20mm.

More than 500,000 locking / unlocking cycles.

The operating temperature range is -20°C to +50°C.

The lock must be installed so that the lock body, bolt and strike plate are precisely aligned and operate without mechanical obstruction. The power supply must match the lock voltage and provide the required unlocking current. A 12V DC power supply is recommended for nominal operation. When integrating the lock into an intercom or access control system, the controller relay output, power supply and the electrical configuration of the entire system must be checked.