Socket outlet | Schuko | industrial | flush-mounted | 16A | 230V | 2P+E | with cover | IP67 | FAMATEL | 13960

Industrial SCHUKO socket outlet – flush-mounted, 16A, 230V, 2P+E, IP67, with cover

Industrial SCHUKO socket outlet, designed for connecting 230 V electrical equipment in places where a more reliable, sealed and recessed electrical connection point is required. This is a flush-mounted / recessed 16 A, 2P+E type socket with a cover, child protection and a high IP67 protection rating, suitable for technical rooms, workshops, industrial zones, agricultural facilities and more humid environments.

• Technical rooms – for creating a fixed 230 V electrical connection point.
• Workshops and service areas – for connecting tools, equipment or technical devices.
• Industrial facilities – when a stronger and sealed SCHUKO socket is required.
• Agricultural buildings – in places where there may be more dust, moisture or risk of mechanical impact.
• Outdoor or semi-outdoor conditions – when the socket is installed in a properly protected location and sealing is ensured.

For example, the socket is installed into the wall of a technical room, equipment housing, electrical box or another location prepared for recessed installation. A 230 V device with a SCHUKO type plug is connected to it, while the cover helps protect the socket contacts when it is not in use.

This solution is suitable when a standard household socket is not sufficient due to moisture, dust or a technical environment, but a standard SCHUKO connection is required.

A socket outlet is an electrical installation component, therefore before installation it is necessary to evaluate the load, cable cross-section, protective device, earthing, mounting location and environmental conditions.

• Installation must be carried out by a qualified electrician, in accordance with applicable electrical safety requirements.
• The rated current of 16 A must not be exceeded – excessive load may cause overheating or damage to the contacts.
• IP67 protection applies only when installed correctly – sealing, suitable cable glands and proper cover closure must be ensured.
• Use only with 230 V SCHUKO equipment – the socket is not intended for 400 V three-phase equipment.
• In wet locations it is recommended to additionally evaluate the need for RCD / RCBO protection according to installation conditions.

Quick selection guide

FAMATEL 13960 – a suitable choice when a recessed industrial SCHUKO socket with 16 A rated current, 230 V voltage, 2P+E contacts, cover, child protection and high IP67 protection rating is required. The socket is suitable for technical, industrial, agricultural and more humid environments where a more reliable 230 V connection point is needed.

Sealed SCHUKO connection point for technical environments

The industrial SCHUKO socket allows you to create a neat, recessed and more reliable 230 V electrical connection point in places where higher protection against dust and moisture is required.

Thanks to the IP67 protection rating, cover, child protection and 2P+E contacts, this socket is a practical solution for workshops, technical rooms, farms, industrial facilities and other more demanding electrical installations.