Solar module 130W | 1020x720x26mm

Technical Specifications:

Pmax (maximum power): 130 W ± 10%
Isc (short-circuit current): 9.7 A ± 10%
Impp (maximum operating current): 9.3 A ± 10%
Voc (open-circuit voltage): 16.4 V ± 10%
Vmpp (maximum operating voltage): 14 V ± 10%
Vsys (maximum system voltage): 600 V ± 10%
Protection class: II
Maximum overload current protection rating: 12 A
Dimensions (length x width x height): 1020 x 720 x 26 mm
Weight: 16 kg
All measurements are made according to STC (1000 W/m², 25 ± 2 ºC, AM1.5) in compliance with IEC 60904-3 standards
Usage:

This solar module is ideal for use in both residential and commercial solar energy systems. It can be used for mounting solar panels on roofs, properties, or large solar power plants.

Advantages:

High efficiency: The solar module achieves good performance under standard test conditions, ensuring high energy production.
Reliability: Protection class II and a wide system voltage range (up to 600 V) allow safe and efficient use of the module in various systems.
Versatile use: Suitable for both small and large solar energy systems, ensuring energy supply for both residential and commercial properties.
Compact design: The module is compact (dimensions 1020 x 720 x 26 mm) and lightweight (16 kg), making it easy to install and transport.
Disadvantages:

Power fluctuation: The power may fluctuate within ± 10%, so actual power may vary slightly from the nominal value.
Maximum voltage and current limitations: The system voltage must be limited to 600 V, and the maximum overload current protection rating is only 12 A, which may restrict use in very large or complex systems.
Optimal lighting requirement: The module achieves maximum efficiency only under standard testing conditions, so efficiency may decrease under poor lighting or dusty conditions.