Products catalog

  • Static deflector with roof flashing D160 | for Monterrey metal roofing | UV ABS | brown

    Code: 1251601

    Ø160 mm kit: static deflector, ventilation outlet and roof flashing for Monterrey-profile metal roofing. UV-stabilised ABS, colour – brown.

  • Static deflector with roof flashing D160 – brown

    A kit for a ventilation outlet through Monterrey-profile metal roofing: static deflector, ventilation outlet and roof flashing. No moving parts.

    Key point

    The static deflector boosts draught using wind and temperature difference, protects against precipitation and birds, and works quietly and maintenance-free. ABS plastic does not rust and is unaffected by moisture, so it is also suitable for aggressive environments – livestock farms, damp rooms, coastal areas.

    Connection diameter
    Ø160 mm
    Roofing
    Monterrey metal
    Type
    Static
    Colour
    Brown

    ⚠ For ventilation only

    The deflector is intended for ventilation ducts only – to extract humid and warm air. Do not install it on flues of stoves, fireplaces, sauna heaters or boilers: hot flue gases and acidic condensate will damage it, and there is a risk of fire and carbon monoxide (CO) poisoning.

    How it works

    • The flashing is fixed to the metal roofing with screws.
    • The ventilation outlet is installed through the flashing.
    • On top, the static deflector boosts draught without moving parts.

    Technical specifications

    Product type Roof ventilation kit with static deflector
    Diameter Ø160 mm
    Kit contents Static deflector + ventilation outlet + roof flashing
    Roofing Monterrey-profile metal
    Material UV-stabilised ABS plastic
    Operating temperature −50 °C … +70 °C
    Fixing With screws
    Weight 3.2 kg (gross 4.3 kg)
    Service life ~20 years (manufacturer data)
    Colour Brown

    Where it is used

    • Domestic ventilation through a metal roof
    • Bathrooms, kitchens, laundry rooms
    • Cooker hood or fan exhaust
    • Livestock farms and agricultural buildings

    Installation diagram: common mistakes and the correct way

    Static deflector with roof flashing D160 – brown – installation diagram: wrong and right | elsprendimai.eu
    ☝ Click the diagram to open an enlarged version.
    ⚠ The diagram is for guidance only and may contain inaccuracies. Before installation, check it against the manufacturer's instructions and the roofing requirements.
    Responsibility for installation lies with the qualified specialist performing it. UAB „Elektrotechnikos sprendimai“ is not liable for installation or possible errors.
    ☝ Elsprendimai.eu recommends:

    ✓ Pros

    • No moving parts – quiet and maintenance-free
    • Everything in the kit for metal roofing
    • ABS does not rust – suitable for aggressive environments
    • Operating temperature −50 °C … +70 °C

    → Limitations

    • Intended for Monterrey-profile metal roofing
    • Not suitable for flues

    ⚠ Installation and maintenance

    • Check that the roofing profile matches.
    • Fix the flashing with screws and seal it.
    • Roof work is work at height.

    FAQ

    How does a static deflector differ from a rotary one?

    A static deflector has no moving parts – it is quiet and maintenance-free; a rotary one extracts air more actively when the wind blows.

    Is it suitable for a cooker hood or fan?

    Yes – the static deflector suits ducts with an extract fan.

    Which roofing is it suitable for?

    Monterrey-profile metal roofing.

    In short

    Static deflector with roof flashing D160 (brown) – a quiet ventilation outlet through a metal roof with no moving parts. Unsure about the size or roofing? Send us the duct diameter and roof type – we will help you choose.

    Phone: +370 620 72733
    E-mail: info@elsprendimai.eu

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Decorative steel radiator grille | for 3-section cast iron radiator | 290×610×140 mm | white | DRG3
    Code: 36390

    Decorative steel grille for covering a 3-section cast iron radiator. Dimensions 290×610×140 mm (W×H×D), colour white, polymer coating.

    The grille hides an old radiator and reduces the risk of direct contact with hot sections – important in children's rooms, kindergartens and schools. Before ordering, measure the radiator width including fittings, its height and its projection from the wall.

    For a longer radiator, grilles can be combined side by side – sections add up, e.g. 10 sections = DRG5 + DRG5.

    Fixings are not included. Side panels in the same colour (610×140 mm) are sold separately: side panel.

    Price 31.46 € VAT incl.
    ( 26.00 € VAT excl. )
    Flexible aluminum air duct | for ventilation | ventilation systems | D160mm | 3,15m | silver | LAO160U
    Code: 18721

    Flexible aluminum air duct - a reliable solution for various ventilation, air circulation and air extraction systems. Thanks to the 80 micron thick aluminum foil, the duct is durable, resistant to high temperature and maintains its shape even under demanding operating conditions.

    The lightweight, flexible and easy-to-install duct is suitable for connecting fans, heat recovery systems, air extraction ducts, kitchen hoods and other ventilation components. 

    Price 8.62 € VAT incl.
    ( 7.12 € VAT excl. )
    Fan with backdraft damper | D100 | 230V | with controller | 155x155x101mm | plastic | white
    Code: 16191

    A universal wall-mounted fan with an integrated backdraft damper and 6-mode controller designed for reliable, quiet, and efficient air extraction from bathrooms, showers, kitchens, and other household areas. The fan is built to deliver high performance (90 m³/h) while remaining ultra-quiet (only 25 dB(A)) and consuming very little electricity (just 8.4 W).

    A built-in blue LED indicator on the front panel shows the fan’s operation status, and the axial fan with a ball bearing allows for both horizontal and vertical installation – perfectly adaptable to various installation conditions. Easy installation, reliable construction, and modern control make the device suitable for both professional installers and home users without any hassle. 

    Price 32.67 € VAT incl.
    ( 27.00 € VAT excl. )
    Inspection hatch-door with push-to-open mechanism | 400x500x15mm | aluminum profile | RDL4050B
    Code: 12120

    Inspection doors-hatch are designed to conveniently and aesthetically conceal access to utility systems such as water meters, valves, electrical installations, or ventilation equipment. Made from durable aluminum profile and filled with moisture-resistant plasterboard, these doors are not only long-lasting but also adaptable to any interior – they can be painted or decorated along with the wall. The doors open and close with a push mechanism, so no additional handles or locks are needed for installation. Perfect for mounting in plasterboard walls or partitions where frequent access to hidden components is required.

    Price 69.41 € VAT incl.
    ( 57.36 € VAT excl. )
    Inspection hatch door | 200x400x55mm | steel | RDL2040CS
    Code: 21360

    High-quality inspection doors designed for convenient and aesthetic access to engineering systems – water meters, valves, electrical or heating equipment. The sturdy steel body, resistant to corrosion, combined with a moisture-resistant gypsum board, allows for easy integration of the hatch into various types of walls and partitions. A modern adjustable tilt hinge ensures easy opening and closing of the doors with just a touch.

    These doors can be finished with a variety of materials – tiles, stone, mirrors, or other decorative coatings – seamlessly blending into the overall interior design. 

    Price 41.12 € VAT incl.
    ( 33.98 € VAT excl. )
    Supply air ventilation damper in wall | with G3 filter | ASA plastic outdoor grille | D125 | 0,5m | white | 12,5TOV
    Code: 09452

    Wall-mounted supply air vent D125 with a 500 mm insulated duct, G3 filter and adjustable diffuser. Outdoor side – ASA plastic outdoor grille. Intended for controlled air inflow in rooms with forced exhaust.

    Price 33.58 € VAT incl.
    ( 27.75 € VAT excl. )
  • Subscribtion to new arrivals

    privacy policy

    Information