Products catalog

  • Ventilation grille | for ventilation systems | magnetic removal | 200×200 mm | black color | painted steel

    Code: 2124720

    Black magnetic ventilation grilles – an aesthetic and practical solution for air supply and extraction openings in residential, commercial and technical premises. The grille dimensions are 200 × 200 × 26 mm, they are designed for a 175 × 175 mm mounting opening, made of painted steel and feature an integrated insect mesh. The magnetically attached front panel can be easily removed for cleaning and maintenance, making the grilles convenient for use even in ventilation openings installed close to the floor. 

  • Ventilation grille | magnetic | removable | 200 × 200 × 26 mm | with insect mesh | painted steel | black | wall-mounted

    Black metal ventilation grille with a magnetic removal mechanism – a practical and aesthetic solution for air supply and exhaust openings in residential, commercial and technical premises. The grille is made of painted steel and its external dimensions are 200 × 200 × 26 mm. The construction is designed for a 175 × 175 mm installation opening and can be secured with screws or suitable mounting adhesive. The removable front section is held in place by magnets, so it can be quickly removed and reattached without complicated disassembly. The integrated insect mesh helps reduce the entry of insects and larger contaminants through the ventilation opening. The minimalist black design suits modern interiors, while the durable steel construction is suitable for air distribution systems requiring regular maintenance.

    Key point:
    A ventilation grille must not only cover the air duct opening, but also allow airflow, protect the opening from insects and ensure convenient maintenance. Traditional screw-mounted grilles often require the fasteners to be removed during cleaning, which becomes inconvenient in harder-to-reach locations. This black steel grille has a magnetically attached front section that can be easily removed for cleaning. This combines a neat finish around the ventilation opening, mechanical durability, an insect mesh and quick access to the internal construction.

    ⚡ Spark: Phase, why does a ventilation grille need magnets? Couldn’t it simply be screwed to the wall and left there?

    ⚙ Phase: It can be screwed in place, but ventilation grilles need periodic cleaning. Dust accumulates on them, and the insect mesh can also become clogged. The magnetic construction allows the front section to be removed without dismantling the main mounting. You clean the grille, check the mesh and reattach it. This is especially convenient when the ventilation opening is close to the floor, where dust usually accumulates more intensively.

    External dimensions
    200 × 200 × 26 mm
    Installation opening
    175 × 175 mm
    Construction
    Magnetic | removable
    Material
    Painted steel | black

    Operating principle

    The ventilation grille acts as a covering and protective element for the airflow opening. Its construction allows air to move between the room and the ventilation duct while covering the opening and reducing the direct entry of insects and larger contaminants.

    This model is suitable for both air supply and exhaust systems. The direction of airflow depends on the operating principle of the ventilation system – natural air exchange or the pressure difference created by mechanical ventilation equipment.

    The grille construction consists of a section fixed to the mounting surface and a removable front element held by magnets. The magnetic connection makes it easy to separate the front part from the base, so the mounting screws do not need to be removed every time maintenance is carried out.

    The integrated insect mesh creates an additional mechanical barrier between the room and the air duct. It helps reduce the entry of flies, mosquitoes and other insects through the ventilation opening and traps some larger airborne contaminants.

    The mesh is not a fine-dust or particulate filtration element. Its main purpose is mechanical protection against insects. Dirt that accumulates on the mesh and grille surface over time can be removed after taking off the front section.

    The external dimensions of the grille are 200 × 200 mm, while the construction depth is 26 mm. The installation opening measures 175 × 175 mm. The larger outer section covers the edges of the installation opening and creates a neat finish around the ventilation duct.

    The painted steel body provides structural strength and resistance to everyday mechanical impact. The black surface finish allows the grille to be matched with dark walls, metal structures, modern interior elements and technical room finishes.

    The grille can be installed either mechanically with screws or by bonding, provided a mounting adhesive suitable for the surface and operating conditions is used.

    Magnetic removal is particularly useful when the grille is installed low near the floor, where household dust and small contaminants tend to accumulate more frequently. Removing the front section provides easier access to the ventilation opening for cleaning.

    Why is this ventilation grille useful?
    The magnetic removable construction allows quick periodic maintenance of the ventilation opening. The integrated insect mesh helps protect the ventilation duct, while the painted steel body provides mechanical strength. The black 200 × 200 mm grille is designed for a 175 × 175 mm installation opening and is suitable for both air supply and exhaust systems. Its minimalist design makes it suitable for residential, commercial and technical premises.

    Technical data

    Product type Ventilation / air grille
    Construction type Two-piece, with magnetically removable front section
    Material Steel
    Surface finish Painted surface
    Colour Black
    External width 200 mm
    External height 200 mm
    Construction depth 26 mm
    Overall external dimensions 200 × 200 × 26 mm
    Installation opening width 175 mm
    Installation opening height 175 mm
    Installation opening dimensions 175 × 175 mm
    Installation method Fixing with screws or suitable mounting adhesive
    Front section fixing Magnetic
    Front section removal Removable and reattachable
    Insect mesh Integrated
    Ventilation purpose Air supply and exhaust
    Installation location Wall, including ventilation openings located low near the floor
    Net weight 0.45 kg
    Gross weight 0.52 kg
    Main purpose Covering ventilation openings, airflow and insect protection
    Application areas Residential, administrative, commercial and technical premises

    Main functions

    • Magnetic removal – the front section of the grille can be quickly removed and reattached.
    • Convenient maintenance – the removable construction makes cleaning the grille and insect mesh easier.
    • Integrated insect mesh – helps reduce the entry of insects into the ventilation duct or room.
    • Air supply – can be used to cover air inlet openings.
    • Air exhaust – suitable for air extraction openings in ventilation systems.
    • Painted steel construction – strong and mechanically more stable than many lightweight plastic grilles.
    • Black colour – minimalist design for modern interiors and technical premises.
    • 200 × 200 mm external size – neatly covers the ventilation opening and its edges.
    • 175 × 175 mm installation opening – clear dimensions for preparing the opening.
    • Two fixing methods – installation with screws or adhesive.
    • Reusable magnetic fixing – allows periodic maintenance without dismantling the main construction.
    • Wall mounting – suitable for standard ventilation openings and those located low near the floor.

    Where is it used?

    • In ventilation systems of houses and apartments.
    • In air circulation openings in corridors, utility and technical rooms.
    • In general kitchen ventilation openings.
    • In bathroom and WC ventilation systems when suitable protection against moisture is provided.
    • In garage and workshop ventilation openings.
    • In air supply and exhaust systems of storage rooms and warehouses.
    • In office and administrative ventilation systems.
    • In ventilation openings of retail and service premises.
    • In general ventilation systems of boiler rooms and heating equipment rooms where the required airflow is maintained.
    • In server rooms and other technical room air circulation solutions.
    • In wall-mounted air supply openings located low near the floor.
    • In interiors requiring black metal ventilation grilles.

    Use according to requirement

    For household users.
    The black metal grille is suitable for covering ventilation openings in living spaces, garages, storage rooms or utility areas. The magnetic front section makes cleaning easier, while the insect mesh helps reduce the entry of unwanted insects.
    For the ventilation installer.
    The 175 × 175 mm installation opening, 200 × 200 mm external size and option of screw or adhesive fixing allow the grille to be installed neatly in wall-mounted air supply and exhaust systems. The magnetic construction provides convenient access to the mesh and duct opening.
    For the engineer / designer.
    The metal construction, magnetic removal and integrated insect mesh are suitable for ventilation systems where convenient regular maintenance is important. The grille dimensions should be assessed together with the required airflow, duct construction and installation conditions.

    Practical application

    A 175 × 175 mm ventilation opening is installed low near the floor in the technical room of a private house. The aim is to ensure neat airflow and prevent insects from entering through the ventilation duct. The mounting base of the black steel ventilation grille is fixed to the wall, while the front section is attached using magnetic holders. The 200 × 200 mm external dimensions cover the edges of the opening and create a neat finish. During use, dust and dirt accumulate on the mesh, so the magnetic front section is periodically removed, the surface and mesh are cleaned, and the grille is reattached to the base. This construction allows the ventilation opening to be maintained without using a screwdriver during every cleaning procedure.

    Advantages

    • Quick-removal magnetic construction.
    • Convenient cleaning and periodic maintenance.
    • Integrated insect mesh.
    • Suitable for air supply and exhaust openings.
    • Strong painted steel body.
    • Aesthetic black finish.
    • Neat 200 × 200 mm external size.
    • 175 × 175 mm installation opening.
    • Can be installed with screws or adhesive.
    • Convenient for use in openings located low near the floor.
    • Magnetic front section can be removed without additional tools.
    • Suitable for residential, commercial and technical premises.

    Limitations

    • Steel grilles are heavier than similar-sized plastic models.
    • The magnetic front section must be positioned correctly to remain stable.
    • The insect mesh traps some dirt and therefore requires periodic cleaning.
    • The insect mesh is not a fine-dust filtration system.
    • The painted steel construction should be protected from prolonged exposure to aggressive moisture and chemicals.
    • Not suitable for openings requiring a different installation size without additional adaptation.
    • The grille is not an airflow control damper or mechanical fan.

    Installation and maintenance recommendations

    • Preparing the installation opening. The grille is designed for a 175 × 175 mm opening, while its external section measures 200 × 200 mm.
    • Installation location. Installed on a wall and also suitable for ventilation openings located low near the floor.
    • Surface preparation. The mounting surface must be firm, level and properly prepared for the selected fixing method.
    • Screw fixing. Mechanical fixing should be selected according to the wall material and grille construction.
    • Adhesive fixing. Use mounting adhesive suitable for the wall surface and metal.
    • Magnetic fixing. After mounting the base, attach the front section with magnets and check that it is held securely.
    • Ventilation duct opening. The grille must not be installed in a way that blocks airflow.
    • Airflow direction. Suitable for both air supply and exhaust when the specific ventilation system is designed for this type of opening.
    • Airflow sizing. The efficiency of the ventilation system depends on grille airflow capacity, duct construction and operating ventilation equipment.
    • Cleaning the insect mesh. Dust and dirt accumulating on the mesh must be removed periodically to avoid restricting airflow.
    • Removing the magnetic section. Remove the front section carefully to avoid damaging the magnets, grille surface and mounting base.
    • Surface cleaning. Clean painted steel using a soft cloth and suitable non-abrasive products.
    • Protecting the paint coating. Avoid sharp tools and abrasive cleaners that could scratch the black surface.
    • Wet rooms. The metal construction must be protected against prolonged direct accumulation of water.
    • Boiler room ventilation. The grille must not reduce the mandatory amount of air required for combustion and room ventilation.
    • Server rooms and technical rooms. The installation location and airflow capacity must meet equipment cooling and room ventilation requirements.
    • Periodic maintenance. Regularly check the magnetic fixing, mesh cleanliness and condition of the mounting base.
    ⚡ Phase tip:
    When choosing a ventilation grille, it is important to distinguish the external size from the installation opening dimensions. This model measures 200 × 200 mm externally, while the installation opening is 175 × 175 mm. This allows the grille to cover the opening edges and create a neat finish. If the grille is installed low near the floor, magnetic removal is particularly practical because dust accumulates more frequently in such locations. Clean the insect mesh periodically – a clogged mesh reduces airflow. Also, do not confuse the mesh with an air filter: insect protection and fine-dust filtration are different functions.

    Quick selection guide

    200 × 200 mm
    Opening 175 × 175 mm
    Magnetic removal
    Steel | black
    Suitable when you need:
    • black metal ventilation grilles
    • 200 × 200 mm external opening finish
    • a 175 × 175 mm installation solution
    • a magnetically removable front section
    • convenient ventilation mesh cleaning
    • integrated insect protection
    • covering an air supply or exhaust opening
    • a durable painted steel construction
    • a modern black ventilation opening finish
    Most important selection parameters:
    • external grille size – 200 × 200 mm
    • construction depth – 26 mm
    • installation opening – 175 × 175 mm
    • installation location – wall or low near the floor
    • fixing method – screws or adhesive
    • maintenance convenience of the magnetic front section
    • use of insect mesh
    • air supply or exhaust system purpose
    • room environment and moisture conditions
    Important reminder: a ventilation grille is a passive air distribution opening element. It does not generate airflow itself and does not replace a fan, airflow control damper or filtration system. The integrated insect mesh must be cleaned regularly so that it does not restrict airflow.

    FAQ – Spark asks, Phase answers

    ⚡ Spark: How does a magnetic ventilation grille differ from a standard grille?
    ⚙ Phase: The main difference is the removable front section. Magnets allow it to be quickly removed for cleaning and reattached without dismantling the main installation. This is convenient for regular maintenance of the grille and insect mesh.
    ⚡ Spark: What size ventilation opening is this grille designed for?
    ⚙ Phase: It is designed for a 175 × 175 mm installation opening. The external grille dimensions are 200 × 200 mm, allowing it to cover the edges of the opening.
    ⚡ Spark: Is the grille suitable for both air supply and exhaust?
    ⚙ Phase: Yes. It can be used for both air inlet and air extraction openings. The direction and quantity of airflow are determined by the overall ventilation system, while the grille performs the covering and protective function.
    ⚡ Spark: Can the front section be removed without tools?
    ⚙ Phase: Yes. The magnetic fixing allows the front section to be removed by hand. The main mounting frame remains attached to the wall.
    ⚡ Spark: Does the grille protect against mosquitoes and flies?
    ⚙ Phase: Yes. The integrated insect mesh helps reduce insects entering through the ventilation opening. It also traps some larger contaminants.
    ⚡ Spark: Does the insect mesh trap fine dust?
    ⚙ Phase: The mesh is intended primarily to stop insects and larger contaminants. Special air filters are required for fine-dust filtration and should be selected according to the needs of the ventilation system.
    ⚡ Spark: Can the grille be mounted without screws?
    ⚙ Phase: Yes. Installation with a suitable mounting adhesive is possible. The base must be firm, clean and suitable for adhesive fixing.
    ⚡ Spark: Can it be installed low near the floor?
    ⚙ Phase: Yes. The grille is suitable for ventilation openings located low in the wall. Magnetic removal is especially useful in such locations because dust and other contaminants accumulate more frequently near the floor.
    ⚡ Spark: Is painted steel better than plastic?
    ⚙ Phase: Steel provides greater structural rigidity and resistance to mechanical impact, but it is heavier. Plastic grilles are generally lighter, while metal grilles are often chosen for their durability and appearance.
    ⚡ Spark: Can the grille be used in a kitchen?
    ⚙ Phase: Yes, it can be used in general kitchen ventilation openings. However, it is not a special cooker hood grease filter – in areas where grease accumulates, the grille and mesh should be cleaned more frequently.
    ⚡ Spark: Is the grille suitable for a boiler room?
    ⚙ Phase: It can be used for a boiler room general ventilation opening if the required airflow for the room and equipment is ensured. The insect mesh and grille construction must not reduce the required amount of ventilation air.
    ⚡ Spark: Do the magnets allow the grille to be removed repeatedly over time?
    ⚙ Phase: Yes. The magnetic fixing is designed for repeated removal and reattachment of the front section. It is important to protect the magnets and their contact points from mechanical damage and accumulated dirt.
    ⚡ Spark: Does this grille regulate the amount of air entering the room by itself?
    ⚙ Phase: No. It is a passive ventilation grille. Airflow is controlled by other ventilation system components, such as air dampers or fan control.
    ⚡ Spark: What is the best way to clean the black steel grille?
    ⚙ Phase: Remove the magnetically attached front section, remove accumulated dust and clean the surface with a soft cloth. Clean the insect mesh as well, and check the magnetic fixing points before reattaching the grille.

    Black magnetic ventilation grille 200 × 200 mm – painted steel, with insect mesh

    Black metal ventilation grille with magnetic removal, designed for air supply and exhaust openings in residential, commercial and technical premises. External dimensions – 200 × 200 × 26 mm, installation opening – 175 × 175 mm. The durable painted steel construction, integrated insect mesh and magnetically removable front section provide an aesthetic finish around the ventilation opening and convenient periodic maintenance. The grille can be installed with screws or suitable mounting adhesive, on walls and in ventilation openings located low near the floor. A versatile solution for homes, offices, garages, warehouses, workshops, boiler rooms and other premises where airflow, insect protection and easy grille cleaning are important.

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Supply air ventilation damper in wall | with G3 filter | aluminium grille with mesh | D125 | 0,5m | white | 12,5TOV-05
    Code: 09575

    Wall-mounted supply air vent D125 with a 500 mm insulated duct, G3 filter and adjustable diffuser. Outdoor side – aluminium outdoor grille with mosquito mesh. Intended for controlled air inflow in rooms with forced exhaust.

    Price 29.63 € VAT incl.
    ( 24.49 € VAT excl. )
    Flexible aluminum air duct | for ventilation | ventilation systems | D100mm | 3,15m | silver | LAO100U
    Code: 18711

    Flexible aluminum air duct - a reliable solution for various ventilation, air circulation and air extraction systems. Thanks to the 80 micron thick aluminum foil, the duct is durable, resistant to high temperature and maintains its shape even under demanding operating conditions.

    The lightweight, flexible and easy-to-install duct is suitable for connecting fans, heat recovery systems, air extraction ducts, kitchen hoods and other ventilation components. 

    Price 5.57 € VAT incl.
    ( 4.60 € VAT excl. )
    Rotary deflector D160 | ball bearings | ABS plastic | blue
    Code: 04512

    ABS plastic rotary deflector D160 with ball bearings, blue. Fits onto a Ø160 mm pipe or ventilation outlet and extracts air without electricity.

    Price 95.59 € VAT incl.
    ( 79.00 € VAT excl. )
    Smart humidity and temperature controller | sensor | 1-channel | 3500W | 100-240V | Wi-Fi | SONOFF | TH16
    Code: SONOFF-TH16

    SONOFF TH16 is a 1-channel Wi-Fi relay (15 A, 3500 W) with a 2.5 mm sensor jack for temperature and humidity measurement. It automatically controls a heater, fan or humidifier by set limits, with data and control in the eWeLink app. Sensor sold separately.

    Price 16.70 € VAT incl.
    ( 13.80 € VAT excl. )
    Copper installation cable NYM-J | 3×1.5 mm² | 300/500 V | white | 1 m | Lietkabelis KH05VV-U 3G1.5
    Code: 92031501 (1m)

    NYM-J 3×1.5 mm² (KH05VV-U 3G1.5) – AB Lietkabelis copper installation cable with solid class 1 conductors, PVC insulation and a white PVC sheath, 300/500 V. For fixed installation inside buildings: in walls, under plaster, in conduits and trunking. Sold by the metre.

    3 cores (L, N, PE) for single-phase 230 V installation: lighting, socket and dedicated appliance circuits.

    Price 0.89 € VAT incl.
    ( 0.73 € VAT excl. )
    Extractor fan with backdraft shutter | D100 | 120 m³/h | 230V | 155x155x108mm | IP24 | ABS plastic | white | TY4STT
    Code: 02318

    A modern axial-type fan designed for both home users and professional installers or engineers seeking a reliable, efficient, and durable solution for continuous or periodic room ventilation. This model features a TURBO function for rapid air extraction, a backdraft valve to prevent odor return, and low noise levels.

    Price 34.52 € VAT incl.
    ( 28.53 € VAT excl. )
  • Subscribtion to new arrivals

    privacy policy

    Information