Products catalog

  • Wire 70mm² | copper | flexible | single-core | multi-stranded | H07V-K 70 | 1m | red

    Code: 91370003

    H07V-K 70 – a flexible single-core 70 mm² copper electrical installation wire, designed for electrical distribution boards, industrial equipment and other fixed electrical installations. The wire has a Class 5 stranded copper conductor, a rated voltage of 450/750 V and red PVC insulation, making it easier to shape and install in confined spaces. Suitable for internal wiring in electrical cabinets, cable ducts and insulating conduits when appropriate mechanical protection is provided. 

  • Wire 70 mm² | copper | flexible | single-core | stranded | H07V-K 70 | 1 m | red

    H07V-K 70 – a flexible single-core electrical installation wire with a stranded annealed copper conductor and red PVC insulation. The 70 mm² cross-section wire is intended for electrical distribution boards, electrical cabinets, industrial equipment and medium- and high-power electrical systems. The class 5 flexible conductor construction makes the wire easier to shape and install in confined spaces, while the PVC insulation provides electrical insulation and mechanical protection of the conductor.

    Key point:
    When installing large cross-section electrical wires in distribution boards, they often need to be bent and routed between connection points. The H07V-K 70 stranded class 5 copper conductor is more flexible than a solid conductor, making it easier to arrange inside electrical cabinets. The 450/750 V rated wire with red PVC insulation is intended for fixed electrical installations when suitable mechanical protection is provided.
    Rated voltage
    450/750 V
    Conductor
    1 × 70 mm², flexible Cu
    Flexibility class
    Class 5 (IEC 60228)
    Operating temperature
    up to +70 °C

    Construction and operating principle

    H07V-K 70 consists of a single 70 mm² conductor made from many thin strands of annealed copper wire. This class 5 construction provides flexibility and makes installation easier in electrical distribution boards and industrial electrical cabinets.

    The conductor is covered with red TI 1 type PVC insulation with a thickness of 1.4 mm. The overall wire diameter is approximately 14.7 mm, so its dimensions must be considered when selecting terminals, cable ducts and installation accessories.

    The wire is intended for transmitting electrical energy in fixed installations. Its flexible construction makes connection to electrical equipment easier, but the conductor must be properly secured and protected against mechanical damage.

    What are the benefits of H07V-K 70?
    The 70 mm² cross-section allows the wire to be used for connections in higher-power electrical systems when this conductor size is specified by the design. The stranded copper conductor makes installation easier and allows connections to be arranged more conveniently inside electrical cabinets and distribution boards.

    Technical specifications

    Product type Flexible single-core installation wire
    Designation H07V-K 70 / LGY
    Manufacturer AB „Lietkabelis“
    Conductor material Annealed copper (Cu)
    Conductor construction Stranded, flexible
    Flexibility class Class 5 according to IEC 60228
    Number of cores 1
    Core cross-section 70 mm²
    Rated voltage U₀/U 450/750 V
    Test voltage 2.5 kV
    Insulation material TI 1 type PVC compound
    Insulation colour Red
    Outer diameter Approx. 14.7 mm
    Insulation thickness 1.4 mm
    Maximum operating temperature +70 °C
    Short-circuit temperature Up to +160 °C
    Heat shock 1 hour at +150 °C
    Installation temperature From −5 °C to +40 °C
    Operating temperature From −30 °C to +70 °C
    Standards IEC 60227, LST EN 60227
    Sales unit 1 m, minimum order – 10 m

    The outer diameter is approximate. When selecting connection terminals, cable lugs and installation accessories, their compatibility with a 70 mm² flexible stranded conductor must be checked.

    Main functions

    • Electrical power transmission – used for connections in medium- and high-power electrical systems.
    • Flexible conductor – class 5 stranded copper construction makes installation easier.
    • 70 mm² cross-section – intended for circuits requiring this conductor cross-section.
    • PVC insulation – electrically insulates the copper conductor and provides mechanical protection.
    • Single-core construction – allows the conductor to be routed separately within the electrical installation.
    • Internal panel connections – suitable for installation in electrical distribution and control cabinets.
    • Installation in conduits – used in insulating conduits and cable ducts.
    • Red insulation – helps visually distinguish the conductor according to the marking defined in the project.
    • Temperature resistance – operating temperature up to +70 °C, up to +160 °C during short circuit.
    • Sold by the metre – the required length can be ordered from 10 m.

    Where is it used?

    • Electrical distribution boards and cabinets
    • Internal electrical connections in distribution boards
    • Power supply circuits for industrial equipment
    • Indoor electrical installations in buildings
    • Automation and control cabinet wiring
    • Electrical equipment connection circuits
    • Insulating conduits and cable ducts
    • Enclosed fixed electrical installation systems

    Use by requirement

    For the electrical panel installer.
    The class 5 flexible conductor makes it easier to form connections between distribution-board components, especially where installation space is limited.
    For the electrical designer.
    The 70 mm² copper conductor can be selected for fixed electrical circuits after evaluating the load, installation conditions and protective devices.
    For the industrial equipment installer.
    The flexible single-core wire is used for power-supply and control-cabinet connections where a 70 mm² conductor is required.

    Practical application

    In an electrical distribution board, H07V-K 70 can be used for a connection between electrical distribution components if the project requires a 70 mm² copper conductor. The stranded construction makes it easier to bend and route the wire to the connection point, while terminals compatible with class 5 conductors or suitable cable lugs must be used for the connection.

    Advantages

    • Annealed copper – good electrical conductivity
    • Class 5 flexible stranded conductor
    • More convenient installation in confined spaces
    • PVC insulation provides electrical and mechanical protection
    • Wide operating temperature range
    • Suitable for electrical panels and industrial equipment wiring

    Limitations

    • Not suitable for direct outdoor installation without additional protection
    • Not intended for direct burial in the ground
    • PVC insulation has limited resistance to aggressive chemicals
    • Connection elements compatible with flexible conductors are required
    • Installation temperature is limited to −5 °C to +40 °C
    • Minimum order quantity – 10 metres

    Safety and installation notes

    • Electrical installation work must be carried out by a qualified specialist after disconnecting and checking the voltage of the electrical circuit.
    • The suitability of a 70 mm² cross-section is determined by the load, installation method, ambient temperature and voltage drop.
    • Use terminals compatible with class 5 flexible copper conductors or correctly selected and crimped cable lugs for connection.
    • Carry out installation work at temperatures from −5 °C to +40 °C.
    • Do not exceed the maximum conductor operating temperature of +70 °C.
    • For outdoor use, provide additional protection against environmental effects and mechanical damage.
    • Use the red conductor only in accordance with the specific electrical-system diagram and applicable conductor-marking requirements.

    Quick selection guide

    450/750 V
    1 × 70 mm²
    Class 5, flexible
    PVC TI 1
    Red insulation
    Suitable when you need:
    • a 70 mm² flexible copper conductor;
    • internal connections in electrical panels or industrial equipment;
    • a fixed installation in insulating conduits or ducts.
    Check before purchasing:
    • whether the circuit specifically requires a 70 mm² cross-section;
    • whether the terminals and cable lugs are suitable for a class 5 copper conductor;
    • whether the red insulation colour complies with the project requirements;
    • whether suitable mechanical protection is provided at the installation location.
    Important reminder: conductor cross-section alone does not determine the permissible current. Permissible load depends on installation conditions, ambient temperature, conductor grouping and other design factors. Final selection must be carried out by a qualified electrical specialist.

    FAQ

    How does H07V-K differ from a solid wire?
    The H07V-K conductor consists of many thin copper strands, making it more flexible than a solid wire. This makes installation in confined spaces and forming connections inside electrical cabinets easier.
    Can H07V-K 70 be used in electrical distribution boards?
    Yes, the wire is intended for electrical distribution and control cabinet installations. The conductor cross-section and connection elements must be selected correctly, and suitable mechanical protection must be provided.
    Are cable lugs required?
    This depends on the design of the terminals being used. If the terminals are not intended for direct connection of a class 5 flexible conductor, correctly selected and crimped cable lugs must be used.
    Can the wire be installed outdoors?
    This wire is not suitable for direct outdoor installation without additional protection. Outdoor installations must provide protection against environmental effects and comply with the requirements of the specific installation method.
    What current can a 70 mm² copper wire carry?
    The permissible current depends on the installation method, ambient temperature, conductor grouping and other conditions. The specific current-carrying capacity must be calculated according to the electrical installation design, not solely from the 70 mm² cross-section.
    How is H07V-K 70 wire sold?
    The price is stated per 1 metre, but the minimum order quantity is 10 metres. Larger quantities can be ordered according to the requirements of the electrical installation.

    Flexible copper wire H07V-K 70 mm² – red

    H07V-K 70 – an AB „Lietkabelis“ single-core flexible copper installation wire intended for electrical distribution boards, industrial equipment and fixed electrical installations. The class 5 stranded conductor, 450/750 V rated voltage and red PVC insulation allow it to be used in various electrical systems when design requirements are followed. The wire is sold by the metre, with a minimum order quantity of 10 m. Need a larger quantity? We will provide an individual quotation.

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

  • privacy policy

    Information