Products catalog

Home/Product Catalog/Electrical distribution and installation/Electrical power | power cables | wires with copper conductors/Accessories for power supply cables/Cable laying | fixing | installation structures/Cable Pullers
  •   Wire | cable puller | threading system | Ø4mm | 25m | black | nylon

    Wire | cable puller | threading system | Ø4mm | 25m | black | nylon

    Code: SM-4/25
    Inquire about this item
    Price 16.00 € VAT incl.
    ( 13.22 € VAT excl. )
    Want another price? Suggest yours!
    Wire and cable puller designed for routing electrical, communication, signal, or other cables through pipes, ducts, installation channels, or other closed conduits. This is a 25 m long, Ø4 mm thick, flexible and durable pulling system made of Nylon-Sonde PERLON material. The black nylon puller is a practical tool for electricians, installers, low-voltage specialists, and indoor installation work. 
  • Product description

    Wire and cable puller Ø4 mm, 25 m – flexible nylon threading system

    Wire and cable puller, designed for routing electrical, communication, signal, or other cables through pipes, ducts, installation channels, or other closed conduits. This is a 25 m long, Ø4 mm thick flexible and durable threading system, made of Nylon-Sonde PERLON material. The black nylon puller is a practical tool for electricians, installers, low-voltage specialists, and indoor installation work.

    Main concept:
    This cable puller helps to thread cables through installation pipes or ducts faster and more conveniently. The 25 m length allows you to work with longer routes, while the Ø4 mm nylon construction provides the flexibility and sufficient strength for everyday electrical installation tasks.
    Length
    25 m
    Thickness
    Ø4 mm
    Material
    Nylon-Sonde PERLON
    Features
    Flexible, durable

    Operating principle

    The cable puller is first inserted into the installation pipe, conduit, cable duct, or other closed route. Once the tip of the puller reaches the other side of the route, the wire or cable is attached to it and then carefully pulled back through the entire route.

    The Ø4 mm nylon construction provides the puller with flexibility, allowing it to navigate through corners and pipe bends more easily. At the same time, the material is strong enough to pull the cable without overloading the puller or damaging the installation route.

    Why use a cable puller?
    A cable puller significantly facilitates the process of routing cables through closed routes. Without such a tool, threading a cable through a pipe or conduit can be difficult, especially when the route is long, has turns, or is already installed within walls, ceilings, or electrical cable channels.

    Technical parameters

    Product type Wire / cable puller
    Purpose Routing wires and cables through pipes, conduits, ducts, and installation routes
    Length 25 m
    Thickness / Diameter Ø4 mm
    Material Nylon-Sonde PERLON
    Construction Flexible, durable threading system
    Color Black
    Suitable for use with Electrical wires, communication cables, signal cables, low-voltage cables based on route size and cable type
    Usage area Electrical installation, indoor mounting work, low-voltage systems, repair and renovation projects

    Where is it used?

    • In electrical installation work – for threading wires through pipes, conduits, or channels.
    • In low-voltage systems – for threading signal, internet, security, or control cables.
    • In renovation work – when a cable needs to be routed through an existing installation route.
    • In residential and commercial buildings – for indoor electrical installation mounting.
    • In workshops and professional installation – as an everyday tool for electricians or cable installers.

    Practical usage example

    For instance, an installer wants to route a new cable through a corrugated pipe installed in a wall. First, they push the 25 m nylon puller into the pipe. Once the tip of the puller emerges on the other side, the cable is attached to it and carefully pulled back through the pipe.

    This method allows cables to be routed faster, more neatly, and with a lower risk of damaging the cable insulation, especially when the route is long or has multiple bends.

    Pros

    • 25 m length – suitable for longer cable routes.
    • Ø4 mm thickness – convenient for most common installation pipes and channels.
    • Flexible construction – easier to move through pipe bends and turns.
    • Durable nylon material – suitable for daily cable pulling tasks.
    • Universal usage – suitable for pulling electrical, communication, signal, and low-voltage cables.
    • Convenient for installers – saves time and facilitates cable threading.
    • Black color – easily visible in the work environment and practical for intensive use.

    Cons / limitations

    • Not suitable for excessive tension – too much force can damage the puller or the cable.
    • Complex routes might require a stiffer tool – for very long or blocked pipes, a different type of puller may be needed.
    • Must be protected from sharp edges – damaged pipe or channel edges can scratch the puller.
    • Does not provide cable protection – it is only a threading tool, not a cable protection or installation element.
    • Cable must be securely attached – an improperly attached cable can detach inside the route.

    Safety and usage notes

    The cable puller is an auxiliary installation tool. When working with electrical installations, it is essential to follow safety requirements, and cables should only be threaded when circuits are safe to work on.

    • Always disconnect power before installation work and verify that the circuit is de-energized.
    • Do not use excessive pulling force – if the cable snags, check the route and reduce resistance.
    • Attach the cable carefully to ensure it does not detach and the insulation remains undamaged.
    • Inspect the route before pulling – the pipe or channel should be free of sharp edges, debris, or blockages.
    • Electrical work must be performed by a qualified specialist, especially when working with 230 V or higher voltage circuits.

    Quick selection guide

    Wire and cable puller Ø4 mm, 25 m – the right choice when you need to route cables through installation pipes, conduits, or channels. The flexible nylon construction helps with standard indoor installation routes, and the 25 m length allows you to reach longer distances.

    Length
    25 m
    Thickness
    Ø4 mm
    Material
    Nylon-Sonde PERLON
    Features
    Flexible, durable
    Suitable when you need to:
    • thread wires through an installation pipe or conduit;
    • pull electrical, communication, or signal cables;
    • work with longer routes up to 25 m;
    • use a flexible and durable auxiliary mounting tool;
    • facilitate renovation or new electrical installation work.
    Check before use:
    • does the route length exceed 25 m?
    • is the Ø4 mm thickness suitable for your pipe or duct?
    • are there any sharp edges, debris, or blockages in the route?
    • is the cable properly attached to the puller?
    • do not use excessive force when pulling.
    Important reminder:
    The cable puller is an auxiliary installation tool. It does not protect the cable from mechanical damage and does not replace a properly designed electrical installation route.

    FAQ – frequently asked questions

    What is this cable puller for?
    It is designed for routing wires and cables through installation pipes, conduits, channels, or other closed routes.
    What is the length of the puller?
    The length of the puller is 25 m.
    What is the thickness of the puller?
    The thickness of the puller is Ø4 mm.
    What material is the puller made of?
    The puller is made of Nylon-Sonde PERLON material.
    Is it flexible?
    Yes, the puller is designed to be flexible and durable, making it suitable for standard electrical installation routes.
    Can it be used for communication cables?
    Yes, the puller can be used for electrical, communication, signal, and low-voltage cables, provided the cable type and route are suitable.
    What if the cable gets stuck in the route?
    Do not pull with excessive force. Check the route for blockages, sharp edges, tight turns, or an improperly attached cable.

    Easier cable routing through pipes and channels

    The 25 m long nylon cable puller helps to route wires through conduits, pipes, installation channels, and other closed routes faster and more neatly.

    Thanks to its Ø4 mm thickness, flexible and durable Nylon-Sonde PERLON body, this tool is a practical choice for electricians, installers, low-voltage specialists, and anyone performing indoor electrical installation work.

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • privacy policy

    Information