Wireless crane control remote | with 7 buttons | with START | mushroom-type STOP button | 2 speeds | rechargeable | IP65

Technical specifications:
General features:

Operating frequency band: 433.100 – 434.775 MHz (ISM)

Transmission mode: LBT

Safety level:

STOP function – PL d

Protection against unintended movement – PL c (according to EN 13849-1)

Passive STOP: < 0.5 s

Active STOP: < 0.1 s

Transmitter:

Power supply: Li-Po battery 3.7V

Protection rating: IP65

Operating temperature: -20 °C to +55 °C

Operating distance: up to 100 m

RF radiated power: <10 mW ERP

Buttons:

6 double-action (two-speed) buttons

1 programmable function button

1 start button

1 emergency STOP button

Receiver:

Power supply: 12-24 V DC / 24-48 V AC 50/60 Hz

Protection rating: IP67

Dimensions: 110 x 165 x 50 mm

Number of control outputs: 8 On/Off channels

Additional:

Programmable automatic shut-off (2, 5, or 10 min)

Integrated battery status indicator (green/red LED lights)

Set includes: transmitter, receiver, USB ELCA-CLIP cable, shoulder strap, protective case, user manual

Functions:

Radio-controlled lifting equipment management

Functional button allows different commands (holding, impulse action, 1/2 selection)

Active STOP emergency shutdown with fast deactivation

Backup frequency search and automatic switching after communication failure

Easy pairing of the remote without loss of programming

Programmable auto power-off for energy saving

Applications:

Industrial crane systems

Warehouse and loading equipment

Construction site lifting and handling machinery

Industrial lifts and platforms

Agricultural machinery

Pros:

Compact and convenient control even in tough conditions

Long operating time – up to 40 hours

Fast and safe communication recovery system

High protection level (IP65 / IP67) – dust, moisture, and shock resistance

Easy installation and control

Ability to receive up to 4 signals from the controlled equipment

Cons:

Operating range limited to 100 meters (may decrease depending on the environment)

Battery charging is done with the protective case on (cannot be removed during charging)