Products catalog

Home/Product Catalog/Automation and Control Systems/Control components for automation and control systems/Trolleys | Crane Control Panels | Hoist Control | Joystick/Wireless industrial crane control panels | remote control systems
  • New item   Wireless crane remote control | 2 joysticks + 4 buttons | proportional | 315 MHz | 24 V receiver | IP65 | ES-ECD-Q5000
    New item   Wireless crane remote control | 2 joysticks + 4 buttons | proportional | 315 MHz | 24 V receiver | IP65 | ES-ECD-Q5000 1
    New item   Wireless crane remote control | 2 joysticks + 4 buttons | proportional | 315 MHz | 24 V receiver | IP65 | ES-ECD-Q5000 2
    New item   Wireless crane remote control | 2 joysticks + 4 buttons | proportional | 315 MHz | 24 V receiver | IP65 | ES-ECD-Q5000 3

    Wireless crane remote control | 2 joysticks + 4 buttons | proportional | 315 MHz | 24 V receiver | IP65 | ES-ECD-Q5000

    Code: ES-ECD-Q5000
    Inquire about this item
    Price 1398.57 € VAT incl.
    ( 1155.84 € VAT excl. )
    Want another price? Suggest yours!

    Belly-type crane remote with 2 joysticks, 4 buttons, an LCD display and a mushroom STOP. Proportional control for smooth load movement via frequency inverters, up to 225 m, IP65, −40…+85 °C.

  • Product description

    Joystick crane remote: 2 joysticks, proportional control, IP65

    ES-ECD-Q5000 is a belly-type wireless crane remote with two joysticks, 4 buttons, an LCD display and a mushroom-type STOP. The transmitter sends commands by radio to the receiver, and the receiver outputs control frequency inverters and contactor coils. Joystick deflection changes speed smoothly, not in steps.

    Key point:
    Two joysticks let you control hoisting and travel at the same time with both hands, and proportional control reduces load sway. A response time of ≤20 ms and −40…+85 °C operating range suit heavy-duty outdoor work too.
    Controls
    2 joysticks + 4 buttons
    Control
    proportional
    Range
    up to 225 m
    Protection
    IP65

    How it works

    Mount the receiver on the crane next to the control panel and power it from the 24 V control voltage. Connect the proportional outputs to the inverter speed inputs, and the direction and auxiliary outputs to the contactor coils.

    The mushroom STOP opens the main contactor KM0. On loss of radio link the receiver must switch off its outputs and the crane must stop (EN 60204-32) – test this during commissioning.

    The operator works up to 225 m away in open space, starts and stops the load smoothly and sees the remote status on the LCD.

    Why choose ES-ECD-Q5000?
    Proportional control lets you place the load precisely without jerks, meaning fewer shocks to the mechanisms and less load sway. The belly housing with two joysticks is comfortable for long shifts.

    Technical specifications

    Product type Wireless crane remote control
    Model ES-ECD-Q5000
    Transmitter type Belly type, with LCD display
    Controls 2 joysticks + 4 buttons + mushroom STOP
    Control Proportional
    Radio frequency 315 MHz
    Operating range up to ~225 m in open space
    Response time ≤20 ms
    Data rate 9600 bit/s
    Receiver sensitivity −115 dBm
    Transmitter power ≤10 mW
    Receiver supply 24 V
    Housing Glass-fibre reinforced PA66, silicone
    Protection class IP65
    Operating temperature −40…+85 °C
    Relative humidity 0–97 %
    Compliance CE, RoHS

    Main functions

    • 2 joysticks – hoist and travel controlled separately, with both hands
    • Proportional control – smooth speed change via frequency inverters
    • 4 extra buttons – for auxiliary functions (horn, lighting, modes)
    • LCD display – remote status in the operator's view
    • Mushroom STOP – fast emergency stop
    • Response ≤20 ms – commands executed without noticeable delay
    • −40…+85 °C, IP65 – for unheated halls and outdoor use

    How does it differ from similar models?

    • EL-F24-60 – also 2 joysticks, but 12–440 V AC/DC receiver – when the control circuit is not 24 V
    • ES-CRC687 – joystick remote at 433 MHz – within the EU SRD band
    • ES-D1 – 4 levers and up to 500 m – more axes and longer range

    Where is it used?

    • Overhead cranes with frequency inverters
    • Gantry and semi-gantry cranes
    • Cranes for precise positioning (moulds, machinery, steel structures)
    • Outdoor storage yards and warehouses
    • Upgrading a crane from push-button to joystick control

    Use by need

    For electricians
    proportional outputs go to inverter inputs, STOP into the KM0 circuit
    For manufacturers
    precise load placement and less wear on mechanisms
    For construction / warehouse yards
    IP65 and −40…+85 °C – outdoor work all year round

    Practical use

    If an overhead crane already has inverters for hoist and travel, then with this remote the operator starts slowly and increases speed evenly by tilting the joystick. This is especially useful when placing expensive machinery or moulds.

    Pros

    • 2 joysticks with proportional control
    • LCD display and mushroom STOP
    • Response ≤20 ms
    • Wide operating range −40…+85 °C
    • Glass-fibre reinforced PA66 housing

    Cons / limitations

    • 315 MHz is usually not a permitted SRD band in the EU – ES-CRC687 (433 MHz) is often the better fit for the EU market
    • Proportional control requires frequency inverters – on a contactor crane only part of its features are used
    • 24 V receiver – for other control voltages choose EL-F24-60 (12–440 V AC/DC)
    • A belly remote is larger than a handheld one – it is worn on a strap

    Safety and installation notes

    • Receiver outputs switch only the control circuit – contactor coils and inverter inputs, not motors.
    • The 24 V receiver supply must match the control circuit voltage.
    • STOP opens the main contactor KM0; loss of link must stop the crane (EN 60204-32).
    • Limit switches (SQ) and opposite-direction interlocking remain in the circuit.
    • Set inverter acceleration and deceleration times to suit the load and mechanism.
    • Before installation or servicing – LOTO on the main isolator.

    Quick selection guide

    2 joysticks
    proportional
    up to 225 m
    IP65

    Check before ordering:

    • The control circuit voltage must be 24 V – otherwise choose EL-F24-60.
    • Check whether 315 MHz is permitted in your country; for the EU market we offer the 433 MHz remote ES-CRC687.
    • Whether the crane drives have inverters for proportional control, and how many directions and auxiliary functions you need.

    FAQ

    What does proportional control mean?
    The further you tilt the joystick, the higher the speed. The crane drives must be controlled by frequency inverters for this.
    Is it suitable for a crane without inverters?
    It can be wired via contactors, but then speed changes in steps, not smoothly. Inverters are needed to use the full potential.
    Is 315 MHz permitted in the EU?
    315 MHz is usually not a permitted SRD band in the EU. Check your national rules or choose the 433 MHz remote ES-CRC687.
    What is the operating range?
    Up to ~225 m in open space. In halls with steel structures the range is shorter.
    What happens on loss of link?
    The receiver must switch off its outputs and open the main contactor – the crane stops. Test this during commissioning.
    Can a motor be connected directly to the receiver?
    No. The receiver drives contactor coils and inverter inputs; motors are supplied by inverters or contactors.

    ES-ECD-Q5000 – smooth crane control with two joysticks

    Belly remote with 2 joysticks, 4 buttons and LCD, proportional control, up to 225 m, IP65. Before ordering check the control voltage (24 V) and whether the frequency is permitted in your country.

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.

  • Alternative products

    Copper installation cable NYM | 2×1.5 mm² no PE | 300/500 V | white | 1 m | Lietkabelis KH05VV-U 2x1.5 New item  
    Copper installation cable NYM | 2×1.5 mm² no PE | 300/500 V | white | 1 m | Lietkabelis KH05VV-U 2x1.5
    Code: 92021501
    Price 0.67 € VAT incl.
    ( 0.56 € VAT excl. )
    Add to cart 

  • Subscribtion to new arrivals

    privacy policy

    Information