Products catalog

  • AC/DC voltage monitoring relay | 1F | AC/DC | 50–300 V | LCD | DIN | Tomzn | TOMPD-AD220

    Code: TOMPD-AD220

    The Tomzn TOMPD-AD220 is a voltage monitoring relay with an output contact: it does not carry the load itself but switches a contact that controls a contactor coil, a signal or an automation input.

  • AC/DC voltage monitoring relay | 1F | AC/DC | 50–300 V | LCD | DIN | Tomzn | TOMPD-AD220

    The Tomzn TOMPD-AD220 is a voltage monitoring relay with an output contact: it does not carry the load itself but switches a contact that controls a contactor coil, a signal or an automation input. When the monitored voltage leaves the set limits, the contact switches over and the controlled circuit is disconnected.

    Key point:
    A control relay is suitable where voltage must be monitored precisely and a contactor or alarm controlled – it disconnects high-power loads via a contactor.
    Contact
    1 C/O + 1 NC
    Voltage limits
    50–300 V
    Network / supply
    110–240 V AC/DC, 50–60 Hz
    Functions
    U> / U<, contact

    How it works

    The relay is supplied from the monitored circuit (depending on the model via terminals A1–A2) and measures the voltage continuously.

    When the voltage leaves the set limits and the delay expires, the output contact switches over – the contactor or alarm is disconnected.

    When the voltage returns to normal, the contact switches back and the circuit is reconnected.

    Why choose the Tomzn TOMPD-AD220?
    Precise voltage monitoring with a contact – suitable for automation, contactors and alarms when the load exceeds the relay contact.

    Technical specifications

    Product type Voltage monitoring relay for AC/DC circuits (control type – with contact)
    Manufacturer / code Tomzn / TOMPD-AD220
    Supply 110–240 V AC/DC, 50–60 Hz
    Operating voltage range 40–310 V AC/DC
    Overvoltage limit U> (factory) 50–300 V
    Undervoltage limit U< (factory) 50–300 V
    Output contact 1 C/O + 1 NC
    Event memory (records) 3
    Display / indication LCD
    Mounting DIN 35 mm

    Main functions

    • Output contact – controls a contactor, alarm or automation input.
    • Overvoltage monitoring U> – reacts to excessive voltage.
    • Undervoltage monitoring U< – reacts to low voltage.
    • Event memory – you see why and when it disconnected.
    • Digital display or indication – the status is visible at once.

    Where is it used?

    • Pump and fan control panels
    • Contactor control circuits
    • Automation and alarm panels
    • Generator and backup supply panels
    • Battery and DC system monitoring (AC/DC models)

    Use by need

    For the automation installer.
    Precise voltage monitoring with a contact for the control circuit.
    For the electrician.
    A compact relay to upgrade an existing board.
    For the equipment manufacturer.
    A simple solution for machine and equipment protection.

    Practical use

    In a pump panel the Tomzn TOMPD-AD220 monitors the mains voltage and controls the contactor coil: at too low voltage the contactor disconnects the pump before the motor overheats.

    Pros

    • Precise voltage monitoring
    • Output contact for control
    • Compact
    • DIN mounting
    • Event memory

    Cons / limitations

    • High-power loads must be connected via a contactor
    • Does not protect against lightning surges
    • Does not replace a circuit breaker
    • The manufacturer does not publish a full datasheet – parameters per supplier specification

    Safety and installation notes

    • Install only after disconnecting the supply; work must be done by a qualified electrician.
    • The contact current must not exceed the rated value – connect high-power loads via a contactor.
    • Protect the control circuit with a fuse or circuit breaker.
    • Check the supply voltage – a relay for another voltage will not work or will burn out.

    Quick selection guide

    1F
    AC/DC
    50–300 V
    LCD
    Suitable when you need:
    • to control a contactor according to voltage
    • to monitor voltage in an automation panel
    Check before use:
    • the supply voltage matches the relay
    • contactor coil current ≤ contact current
    Important reminder: the relay contact is intended for control, not for a high-power load.

    FAQ

    Can the load be connected directly?
    Only a small one – connect high-power loads via a contactor.
    What is the supply voltage?
    See the technical table – a relay for another voltage will not work.
    Are the limits adjustable?
    Yes – with knobs or buttons.
    Does it reset automatically?
    Yes, when the voltage returns to normal.
    Does it protect against lightning?
    No – an SPD is needed for that.
    Is it suitable for DC circuits?
    Only AC/DC or DC models – see the supply voltage.

    AC/DC voltage monitoring relay | 1F | AC/DC | 50–300 V | LCD | DIN | Tomzn | TOMPD-AD220

    Tomzn TOMPD-AD220 – precise voltage monitoring with an output contact for automation and contactor control.

    Published: 2026-11-13 · Data verified against the supplier specification: 2026-11-13

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Terminal clamp | electrical wire connector | universal | 2x0.2-4mm² | for all wire types | WAGO | 221-412 | 4050821808435
    Code: WAGO 221-412

    The WAGO 221-412 connector is one of the most popular and reliable electrical wire connection solutions in the world. It is designed for fast, safe, and professional connection of various types of copper conductors without the need for additional tools.

    Thanks to the patented CAGE CLAMP® technology and convenient orange levers, this connector allows quick connection of solid, stranded, and flexible conductors. The transparent housing enables visual inspection of the connection quality, while its compact dimensions allow easy installation in junction boxes, distribution boards, luminaires, and various automation equipment.

    The WAGO 221 series is widely used in residential, commercial, and industrial applications where reliable, standards-compliant, and long-lasting wire connections are required. 

    Price 0.30 € VAT incl.
    ( 0.25 € VAT excl. )
  • Subscribtion to new arrivals

    privacy policy

    Information