Products catalog

  • Axial exhaust fan | D120 | 160 m³/h | 220V | 181x130x69 mm | plastic | white | IP24

    Code: ESLP18925

    Axial exhaust fan, Ø120 mm: 160 m³/h, 40 Pa, 30 dB(A), 16 W, IP24. Wall or ceiling mounting. Wall or ceiling mounting.

  • Axial exhaust fan | D120 | 160 m³/h | 220V | 181x130x69 mm | plastic | white | IP24

    Axial exhaust fan for a Ø120 mm duct or wall opening – for removing moisture, odours and stale air from a bathroom, toilet, kitchen or storeroom. Compact 181×130×69 mm housing, IP24 protection, wall or ceiling mounting.

    Key point:
    Rated capacity 160 m³/h, static pressure 40 Pa, noise 30 dB(A), power 16 W. This is a simple fan without additional electronics – suitable when it is to be switched together with the lighting or by a separate switch.
    Mounting diameter
    Ø120 mm
    Capacity
    160 m³/h
    Noise
    30 dB(A)
    Feature
    basic model

    How it works

    The fan is inserted into a Ø120 mm duct or wall opening and mounted on a wall or ceiling. Supply: 220–240 V, 50 Hz. The fan is switched by an external switch – a separate one or together with the lighting.

    When switched on, the impeller extracts air into the ventilation duct: rated capacity 160 m³/h, static pressure 40 Pa, power 16 W, current 0.07 A.

    The result is a room that dries faster and a lower risk of condensation and mould.

    Why choose ESLP18925?
    A simple, compact fan for everyday ventilation: standard Ø120 mm diameter, 30 dB(A) noise and 16 W power.

    Technical specifications

    Product type Axial exhaust fan
    Product code ESLP18925
    Duct diameter Ø120 mm
    Air flow 160 m³/h
    Static pressure 40 Pa
    Noise level 30 dB(A)
    Power 16 W
    Current consumption 0.07 A
    Supply 220–240 V / 50 Hz
    Protection rating IP24
    Dimensions 181×130×69 mm
    Housing plastic, white
    Control by an external switch
    Mounting wall or ceiling

    Main functions

    • 160 m³/h capacity – sufficient for air exchange in a bathroom, toilet or storeroom.
    • IP24 protection – protection against solid objects larger than 12.5 mm and against water splashes from any direction.
    • Wall or ceiling mounting – flexible fit to the room.
    • 16 W power – low running costs.
    • Compact housing – 181×130×69 mm, looks neat on a wall or ceiling.

    How the models in this series differ

    • ESLP18925 – basic model · 160 m³/h – this model
    • ESLP18926 – ball-bearing motor · 160 m³/h
    • ESLP18927 – pull-cord switch · 160 m³/h
    • ESLP18628 – backdraft damper · 160 m³/h
    • ESLP18929 – damper + timer · 160 m³/h
    • ESLP18930 – damper + timer + humidity sensor · 160 m³/h
    • ESLP18931 – damper + pull-cord switch · 160 m³/h

    Where is it used?

    • Bathrooms and showers
    • Toilets
    • Kitchens
    • Storerooms and walk-in wardrobes
    • Basements and utility rooms
    • Sanitary rooms in offices and small commercial premises
    • Laundry and drying rooms

    Use by need

    For apartment owners.
    Replaces an old Ø120 mm fan – switched together with the lighting or by a separate switch.
    For electricians.
    Standard Ø120 mm diameter, 220–240 V connection, wall or ceiling mounting.
    For designers.
    Suitable for exhaust ventilation of sanitary, auxiliary and utility rooms – 160 m³/h, 40 Pa.

    Practical use

    If a bathroom measures 2.0 × 2.5 m with a 2.5 m ceiling (about 12.5 m³), the rated flow of 160 m³/h would theoretically change the air about 13 times per hour; in practice the flow will be lower due to duct length, bends and grilles. If the duct joins a shared shaft and back-draught is noticeable, choose the model of this series with a backdraft damper (ESLP18628).

    Pros

    • Noise 30 dB(A)
    • Low consumption – 16 W
    • Wall or ceiling mounting
    • IP24 splash protection

    Cons / limitations

    • No backdraft damper – if there is back-draught, choose ESLP18628
    • No timer or humidity sensor – switch-controlled; with timer: ESLP18929
    • IP24 – splash protection, not protection against water jets or immersion
    • The rated 160 m³/h flow is given without duct resistance; in a long duct it is lower
    • No heat recovery – room air is exhausted

    Safety and installation notes

    • Disconnect the power before installation and make sure the circuit is de-energised.
    • Protect the bathroom circuit with a 30 mA residual current device (RCD).
    • IP24 means splash protection: under HD 60364-7-701, at least IPX4 is required in zones 1 and 2, and installation in zone 0 (inside a bath or shower tray) is not allowed.
    • Mains installation must be carried out by a qualified electrician.

    Quick selection guide

    Ø120 mm
    160 m³/h
    30 dB(A)
    16 W
    IP24
    basic model
    Suitable when you need:
    • To extract moisture and odours from a bathroom or toilet
    • A simple fan switched together with the lighting
    • A compact 181×130×69 mm housing
    Check before use:
    • Whether the duct or opening diameter is Ø120 mm
    • Whether there is room for the 181×130×69 mm housing
    • Whether a 220–240 V supply is available at the opening
    • Whether the room has an air inlet path (gap under the door or a grille)
    Important reminder: The fan does not replace continuous mechanical ventilation or a heat recovery unit – it extracts air only while running.

    FAQ

    How is the fan switched on?
    By an external switch – a separate one or together with the lighting.
    Does the fan have a backdraft damper?
    No, this model has no damper – the version with a damper is ESLP18628.
    What duct diameter does ESLP18925 fit?
    A Ø120 mm duct or wall opening.
    Can it be mounted in the ceiling?
    Yes, the fan is mounted on a wall or ceiling.
    Is it suitable for a bathroom?
    Yes, the housing is IP24, but do not install it in zone 0 and protect the circuit with a 30 mA RCD.
    How much power does the fan use?
    Power 16 W, current 0.07 A, supply 220–240 V / 50 Hz.

    Axial exhaust fan | D120 | 160 m³/h | 220V | 181x130x69 mm | plastic | white | IP24

    ESLP18925 is a Ø120 mm axial exhaust fan: 160 m³/h, 40 Pa, 30 dB(A), 16 W, IP24. A compact solution for bathrooms, toilets and auxiliary rooms.

    Published: 2026-11-13 · Data verified against the supplier specification: 2026-11-13

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Duct centrifugal fan | D125 | 370 m³/h | 52 W | 230 V | 310 Pa | plastic housing | white | 15622
    Code: 15622

    Duct centrifugal fan 15622: D125, up to 370 m³/h, 310 Pa, 52 W, 230 V, plastic housing.

    Price 93.17 € VAT incl.
    ( 77.00 € VAT excl. )
    Shut-off damper for round air duct | for ventilation | air handling systems | D100 | silver | galvanized steel | 100USO
    Code: 04963

    Round duct shut-off damper, designed to shut off, restrict, or regulate airflow in round air ducts. The damper is used in supply, exhaust, or recirculation air systems where simple and efficient control of air movement within premises is required.

    Due to its galvanized steel construction, the product is resistant to corrosion, durable, and suitable for use in residential, commercial, and technical ventilation systems. Manual operation allows easy airflow adjustment without the need for an additional electric actuator or automation system. 

    Price 6.50 € VAT incl.
    ( 5.37 € VAT excl. )
    Supply air ventilation damper in the wall | with filter | mineral wool thermal insulation with foil | D125 | 0,45m | white | 12,5TOV045-01
    Code: 23041

    Wall supply air valve Ø125 mm / 450 mm with filter, non-return valve and foil-faced mineral wool insulation. Restores fresh air supply in apartments, houses and offices, dampens street noise, while the foil protects the wool from moisture and dust.

    Price 31.45 € VAT incl.
    ( 25.99 € VAT excl. )
    Flexible aluminum air duct | for ventilation | ventilation systems | D100mm | 3m | white | LAO100B
    Code: 23033

    Flexible aluminium air duct - a reliable and universal solution for professional and residential ventilation systems. Designed to connect ventilation elements, fans, heat recovery components or other air distribution units.

    Due to its low weight, high flexibility and resistance to high temperatures, the duct ensures quick installation, tightness and long-term operation even in more demanding conditions. The white surface blends aesthetically in technical and visible installation areas. 

    Price 7.20 € VAT incl.
    ( 5.95 € VAT excl. )
  • Subscribtion to new arrivals

    privacy policy

    Information