Axial exhaust fan | D150 | 250 m³/h | 220V | 205x187x86 mm | plastic | white | IPX4
Code: ESLP22737Price 11.76 € VAT incl.( 9.72 € VAT excl. )Axial exhaust fan, Ø150 mm: 250 m³/h, 38 dB(A), 16 W, IPX4, 205×187×86 mm. Designed for bathrooms, toilets and utility rooms when a simple fan with a slim front panel is needed.
-
Axial exhaust fan | D150 | 250 m³/h | 220V | 205x187x86 mm | plastic | white | IPX4
Axial exhaust fan for a Ø150 mm duct – a simple solution for removing moisture and odours from a bathroom, toilet, kitchen or storeroom, controlled by an external switch. The ultra-thin 9 mm front panel allows the fan to be mounted almost flush with the wall or tiles.
Key point:
This is the basic version of the series: the fan extracts air while it is switched on by an external switch, for example together with the room lighting. Rated capacity is 250 m³/h, noise level 38 dB(A), power 16 W. If you need a damper, pull cord or timer, choose another version of the same series.Mounting diameter
Ø150 mmCapacity
250 m³/hNoise
38 dB(A)Power
16 WHow it works
The fan is inserted into a Ø150 mm duct or opening in a wall or ceiling; the 9 mm front panel stays almost flush with the finish. Supply is 220–240 V / 50 Hz. It is switched on by an external switch.
When switched on, the impeller extracts air into the ventilation duct – up to 250 m³/h in free-air conditions, static pressure 54 Pa.
The result is a room that dries faster and a lower risk of condensation and mould.
Why choose ESLP22737?
The simplest version of the series with the same slim panel and the same capacity – suitable when the fan is wired together with the lighting or a separate switch and no extra functions are needed.Technical specifications
Product type Axial exhaust fan Product code ESLP22737 Mounting (duct) diameter Ø150 mm Supply voltage 220–240 V / 50 Hz Power 16 W Current consumption 0.07 A Air flow (capacity) 250 m³/h Static pressure 54 Pa Noise level 38 dB(A) Dimensions 205×187×86 mm Protection rating IPX4 Control external switch Front panel 9 mm thick (ultra slim) Housing plastic, white Mounting wall or ceiling Main functions
- Basic version – controlled by an external switch, for example together with the room lighting.
- 9 mm front panel – the fan can be mounted almost flush with the wall or tiles.
- 250 m³/h capacity – rated air flow for air exchange in a small or medium-sized room.
- 38 dB(A) noise level – as stated in the supplier specification, suitable for domestic rooms.
- IPX4 housing – protected against water splashes from any direction.
- Versatile mounting – in a wall or ceiling.
How the models in this series differ
- ESLP22737 · basic – basic version, controlled by an external switch – this model
- ESLP22738 · with backdraft damper – automatic backdraft damper
- ESLP22739 · with pull-cord switch – pull-cord switch on the housing
- ESLP22740 · with cable and plug – power cable with plug
- Series sizes – D100 – 90 m³/h, 14 W, 35 dB(A), 160×140×76 mm · D125 – 140 m³/h, 16 W, 36 dB(A), 180×160×82 mm · D150 – 250 m³/h, 16 W, 38 dB(A), 205×187×86 mm
Where is it used?
- Bathrooms and showers
- Toilets
- Kitchens and utility rooms
- Storerooms and walk-in wardrobes
- Basements and service rooms
- Laundry rooms
- Small sanitary rooms in offices
Use by need
For apartment owners.
Replaces an old fan that is wired together with the bathroom lighting – no extra functions needed.For electricians.
Standard Ø150 mm duct and simple connection – quick installation.For designers.
The uniform look of the series allows basic and function models to be combined in one project.Practical use
If a bathroom measures 2.0 × 2.5 m with a 2.5 m ceiling (about 12.5 m³), the rated flow of 250 m³/h would theoretically change the air about 20 times per hour. In practice the flow will be lower due to duct length, bends and grilles, so for a long or winding duct a higher-capacity model is worth choosing.Pros
- Simple version without extra functions
- Same look as the other models of the series
- Ultra-thin 9 mm front panel
- Wall or ceiling mounting
- IPX4 protection
- Power – 16 W
Cons / limitations
- No backdraft damper – if you need one, choose ESLP22738
- No timer or humidity sensor – controlled only by an external switch
- The rated 250 m³/h flow is given without duct resistance; in a long duct it is lower
- No heat recovery – room air is exhausted
Safety and installation notes
- Disconnect the power before installation and make sure the circuit is de-energised.
- Protect the bathroom circuit with a 30 mA residual current device (RCD).
- IPX4 means splash protection, not immersion: do not install in zone 0 and follow the zone requirements of HD 60364-7-701.
- Mains installation must be carried out by a qualified electrician.
Quick selection guide
Ø150 mm250 m³/h38 dB(A)16 WIPX4Ultra slim 9 mmSuitable when you need:- To replace a simple bathroom or toilet fan
- A fan wired together with the lighting or a separate switch
- A slim front panel almost flush with the wall
Check before use:- Whether the duct or opening diameter is Ø150 mm
- Whether there is room for the 205×187×86 mm housing
- Whether a 220–240 V supply is available at the opening
- Whether the room has an air inlet path (gap under the door or a grille)
Important reminder: The fan does not replace continuous mechanical ventilation or a heat recovery unit – it extracts air only while running.FAQ
Does it have a backdraft damper or timer?
No, this is the basic version; the backdraft damper is in model ESLP22738.What duct diameter does ESLP22737 fit?
A Ø150 mm duct or opening.Can it be mounted in the ceiling?
Yes, the fan can be mounted in a wall or ceiling.How is it switched on?
By an external switch, for example together with the room lighting.What is special about the front panel?
It is only 9 mm thick, so the fan looks almost flush with the wall or tiles.Is it suitable for a bathroom?
Yes, the housing is IPX4, but install it outside zone 0 and protect the circuit with a 30 mA RCD.Axial exhaust fan | D150 | 250 m³/h | 220V | 205x187x86 mm | plastic | white | IPX4
ESLP22737 – axial exhaust fan Ø150 mm: 250 m³/h, 38 dB(A), 16 W, IPX4. Designed for bathrooms, toilets and utility rooms when a simple fan with a slim front panel is needed.
Published: 2026-11-13 · Data verified against the supplier specification: 2026-11-13
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Shut-off damper for round air duct | for ventilation | air handling systems | D100 | silver | galvanized steel | 100USOCode: 04963Round duct shut-off damper, designed to shut off, restrict, or regulate airflow in round air ducts. The damper is used in supply, exhaust, or recirculation air systems where simple and efficient control of air movement within premises is required.
Due to its galvanized steel construction, the product is resistant to corrosion, durable, and suitable for use in residential, commercial, and technical ventilation systems. Manual operation allows easy airflow adjustment without the need for an additional electric actuator or automation system.
Price 6.50 € VAT incl.( 5.37 € VAT excl. )Supply air ventilation damper in the wall | with filter | mineral wool thermal insulation with foil | D125 | 0,45m | white | 12,5TOV045-01Code: 23041Wall supply air valve Ø125 mm / 450 mm with filter, non-return valve and foil-faced mineral wool insulation. Restores fresh air supply in apartments, houses and offices, dampens street noise, while the foil protects the wool from moisture and dust.
Price 31.45 € VAT incl.( 25.99 € VAT excl. )Duct centrifugal fan | D125 | 370 m³/h | 52 W | 230 V | 310 Pa | plastic housing | white | 15622Code: 15622Duct centrifugal fan 15622: D125, up to 370 m³/h, 310 Pa, 52 W, 230 V, plastic housing.
Price 93.17 € VAT incl.( 77.00 € VAT excl. )Flexible aluminum air duct | for ventilation | ventilation systems | D100mm | 3m | white | LAO100BCode: 23033Flexible aluminium air duct - a reliable and universal solution for professional and residential ventilation systems. Designed to connect ventilation elements, fans, heat recovery components or other air distribution units.
Due to its low weight, high flexibility and resistance to high temperatures, the duct ensures quick installation, tightness and long-term operation even in more demanding conditions. The white surface blends aesthetically in technical and visible installation areas.
Price 7.20 € VAT incl.( 5.95 € VAT excl. )


























