Axial exhaust fan with backdraft damper | D125 | 180 m³/h | 220V | 179x151x82 mm | plastic | white | IP45
Code: ESLP18564Price 24.10 € VAT incl.( 19.92 € VAT excl. )Axial exhaust fan with backdraft damper, Ø125 mm: 180 m³/h, 30 dB(A), 10 W, IP45, 179×151×82 mm. The backdraft damper stops cold air and odours from returning from the duct.
-
Axial exhaust fan with backdraft damper | D125 | 180 m³/h | 220V | 179x151x82 mm | plastic | white | IP45
Axial exhaust fan for a Ø125 mm duct with a built-in automatic backdraft damper. Designed to remove moisture and odours from a bathroom, toilet, kitchen or storeroom when the duct must stay closed while the fan is off. ABS plastic housing with an easily removable front panel, protection rating IP45.
Key point:
When the fan stops, the backdraft damper closes the duct, so cold air, odours and dust from the shaft do not enter the room. Rated capacity is 180 m³/h, noise level 30 dB(A), power 10 W.Mounting diameter
Ø125 mmCapacity
180 m³/hNoise
30 dB(A)Power
10 WHow it works
The fan is inserted into a Ø125 mm duct or opening in a wall or ceiling. Supply is 220 V AC; the front panel is removable, giving easy access to the impeller. It is switched on by an external switch.
When switched on, the impeller extracts air into the ventilation duct – up to 180 m³/h in free-air conditions, max. pressure 58 Pa. The air flow opens the backdraft damper; when the fan stops, the damper closes and blocks back-draught.
The result is a room that dries faster and a lower risk of condensation and mould.
Why choose ESLP18564?
The fan extracts air and closes the duct when idle – cold air and odours from the shaft do not come back. This matters in apartment buildings and houses with a shared or long ventilation shaft.Technical specifications
Product type Axial exhaust fan with backdraft damper Product code ESLP18564 Mounting (duct) diameter Ø125 mm Supply voltage 220 V AC Power 10 W Air flow (capacity) 180 m³/h Maximum pressure 58 Pa Noise level 30 dB(A) Dimensions 179×151×82 mm Protection rating IP45 Control external switch Backdraft damper built-in, closes automatically when the fan stops Front panel easily removable Housing ABS plastic, white Mounting wall or ceiling Main functions
- Automatic backdraft damper – the duct closes when the fan stops, keeping cold air, odours and dust out of the room.
- Removable front panel – easy to dust and to inspect the impeller.
- 180 m³/h capacity – rated air flow for air exchange in a small or medium-sized room.
- 30 dB(A) noise level – as stated in the supplier specification, suitable for domestic rooms.
- IP45 housing – protected against solid objects larger than 1 mm and water jets.
- Versatile mounting – in a wall or ceiling.
How the models in this series differ
- ESLP18563 · D100 with backdraft damper – 100 m³/h · 35 Pa · 25 dB(A) · 8.4 W · 179×131×76 mm
- ESLP18565 · D100 with damper, humidity sensor and timer – 100 m³/h · 35 Pa · 25 dB(A) · 8.4 W · 179×131×76 mm
- ESLP18567 · D100 Turbo with damper – 115 m³/h · 40 Pa · 32 dB(A) · 19 W · 179×131×76 mm
- ESLP18564 · D125 with backdraft damper – 180 m³/h · 58 Pa · 30 dB(A) · 10 W · 179×151×82 mm – this model
- ESLP18566 · D125 with damper, humidity sensor and timer – 180 m³/h · 58 Pa · 30 dB(A) · 10 W · 179×151×82 mm
- ESLP18568 · D125 Turbo with damper – 220 m³/h · 70 Pa · 38 dB(A) · 20 W · 179×151×82 mm
Where is it used?
- Bathrooms and showers
- Toilets
- Kitchens and utility rooms
- Storerooms and walk-in wardrobes
- Basements and service rooms
- Laundry rooms
- Small sanitary rooms in offices
Use by need
For apartment owners in multi-storey buildings.
The damper keeps out odours and cold air from the shared shaft.For electricians.
Standard Ø125 mm duct, simple connection and a damper already built in.For country house owners.
When the house is unheated or the fan is off, the closed duct keeps cold air out.Practical use
If a bathroom measures 2.0 × 2.5 m with a 2.5 m ceiling (about 12.5 m³), the rated flow of 180 m³/h would theoretically change the air about 14 times per hour. In practice the flow will be lower due to duct length, bends and grilles, so for a long or winding duct a higher-capacity model is worth choosing.Pros
- Built-in automatic backdraft damper
- Easily removable front panel
- Wall or ceiling mounting
- IP45 protection
- Power – 10 W
Cons / limitations
- Controlled by an external switch – no automatic switching by humidity
- The rated 180 m³/h flow is given without duct resistance; in a long duct it is lower
- No heat recovery – room air is exhausted
Safety and installation notes
- Disconnect the power before installation and make sure the circuit is de-energised.
- Protect the bathroom circuit with a 30 mA residual current device (RCD).
- IP45 means protection against water jets, but not immersion: do not install in zone 0 and follow the zone requirements of HD 60364-7-701.
- Make sure the backdraft damper opens and closes freely – the duct or sealant must not press on it.
- Mains installation must be carried out by a qualified electrician.
Quick selection guide
Ø125 mm180 m³/h30 dB(A)10 WIP45Backdraft damperSuitable when you need:- To extract moisture from a bathroom or toilet
- To stop cold air and odours coming back from the duct
- An IP45 housing for a damp room
Check before use:- Whether the duct or opening diameter is Ø125 mm
- Whether there is room for the 179×151×82 mm housing
- Whether a 220 V supply is available at the opening
- Whether the room has an air inlet path (gap under the door or a grille)
Important reminder: The fan does not replace continuous mechanical ventilation or a heat recovery unit – it extracts air only while running.FAQ
What is the backdraft damper for?
When the fan stops it closes the duct so that cold air and odours do not enter the room.What duct diameter does ESLP18564 fit?
A Ø125 mm duct or opening.Can it be mounted in the ceiling?
Yes, the fan can be mounted in a wall or ceiling.Does it have a timer or humidity sensor?
No, this model is controlled by an external switch.Can the front panel be removed?
Yes, the front panel is easily removable for cleaning and maintenance.Is it suitable for a bathroom?
Yes, the housing is IP45, but install it outside zone 0 and protect the circuit with a 30 mA RCD.Axial exhaust fan with backdraft damper | D125 | 180 m³/h | 220V | 179x151x82 mm | plastic | white | IP45
ESLP18564 – axial exhaust fan with backdraft damper Ø125 mm: 180 m³/h, 30 dB(A), 10 W, IP45. The backdraft damper stops cold air and odours from returning from the duct.
Published: 2026-11-13 · Data verified against the supplier specification: 2026-11-13
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Duct centrifugal fan | D125 | 370 m³/h | 52 W | 230 V | 310 Pa | plastic housing | white | 15622Code: 15622Duct centrifugal fan 15622: D125, up to 370 m³/h, 310 Pa, 52 W, 230 V, plastic housing.
Price 93.17 € VAT incl.( 77.00 € VAT excl. )Flexible aluminum air duct | for ventilation | ventilation systems | D100mm | 3m | white | LAO100BCode: 23033Flexible aluminium air duct - a reliable and universal solution for professional and residential ventilation systems. Designed to connect ventilation elements, fans, heat recovery components or other air distribution units.
Due to its low weight, high flexibility and resistance to high temperatures, the duct ensures quick installation, tightness and long-term operation even in more demanding conditions. The white surface blends aesthetically in technical and visible installation areas.
Price 7.20 € VAT incl.( 5.95 € VAT excl. )Shut-off damper for round air duct | for ventilation | air handling systems | D100 | silver | galvanized steel | 100USOCode: 04963Round duct shut-off damper, designed to shut off, restrict, or regulate airflow in round air ducts. The damper is used in supply, exhaust, or recirculation air systems where simple and efficient control of air movement within premises is required.
Due to its galvanized steel construction, the product is resistant to corrosion, durable, and suitable for use in residential, commercial, and technical ventilation systems. Manual operation allows easy airflow adjustment without the need for an additional electric actuator or automation system.
Price 6.50 € VAT incl.( 5.37 € VAT excl. )Supply air ventilation damper in the wall | with filter | mineral wool thermal insulation with foil | D125 | 0,45m | white | 12,5TOV045-01Code: 23041Wall supply air valve Ø125 mm / 450 mm with filter, non-return valve and foil-faced mineral wool insulation. Restores fresh air supply in apartments, houses and offices, dampens street noise, while the foil protects the wool from moisture and dust.
Price 31.45 € VAT incl.( 25.99 € VAT excl. )


























