Axial exhaust fan with ball-bearing motor | D120 | 160 m³/h | 220V | 181x130x69 mm | plastic | white | IP24
Code: ESLP18926Price 16.35 € VAT incl.( 13.51 € VAT excl. )Axial exhaust fan with ball-bearing motor, Ø120 mm: 160 m³/h, 40 Pa, 30 dB(A), 16 W, IP24. Ball-bearing motor, suitable for ceilings. Wall or ceiling mounting.
-
Axial exhaust fan with ball-bearing motor | D120 | 160 m³/h | 220V | 181x130x69 mm | plastic | white | IP24
Axial exhaust fan with ball-bearing motor for a Ø120 mm duct or wall opening – for removing moisture, odours and stale air from a bathroom, toilet, kitchen or storeroom. Compact 181×130×69 mm housing, IP24 protection, wall or ceiling mounting. The ball-bearing motor runs more steadily than a sleeve-bearing one and is suitable for ceiling mounting.
Key point:
Rated capacity 160 m³/h, static pressure 40 Pa, noise 30 dB(A), power 16 W. The ball-bearing motor is designed for longer service and ceiling mounting, where sleeve bearings wear faster.Mounting diameter
Ø120 mmCapacity
160 m³/hNoise
30 dB(A)Feature
ball-bearing motorHow it works
The fan is inserted into a Ø120 mm duct or wall opening and mounted on a wall or ceiling. Supply: 220–240 V, 50 Hz. The fan is switched by an external switch – a separate one or together with the lighting.
When switched on, the impeller extracts air into the ventilation duct: rated capacity 160 m³/h, static pressure 40 Pa, power 16 W, current 0.07 A.
The result is a room that dries faster and a lower risk of condensation and mould.
Why choose ESLP18926?
The same compact housing as the basic model, but with a ball-bearing motor – a better choice for ceiling mounting and longer operation.Technical specifications
Product type Axial exhaust fan with ball-bearing motor Product code ESLP18926 Duct diameter Ø120 mm Air flow 160 m³/h Static pressure 40 Pa Noise level 30 dB(A) Power 16 W Current consumption 0.07 A Supply 220–240 V / 50 Hz Protection rating IP24 Dimensions 181×130×69 mm Housing plastic, white Control by an external switch Motor ball-bearing Mounting wall or ceiling Main functions
- Ball-bearing motor – steadier operation and suitability for ceiling mounting.
- 160 m³/h capacity – sufficient for air exchange in a bathroom, toilet or storeroom.
- IP24 protection – protection against solid objects larger than 12.5 mm and against water splashes from any direction.
- Wall or ceiling mounting – flexible fit to the room.
- 16 W power – low running costs.
- Compact housing – 181×130×69 mm, looks neat on a wall or ceiling.
How the models in this series differ
- ESLP18925 – basic model · 160 m³/h
- ESLP18926 – ball-bearing motor · 160 m³/h – this model
- ESLP18927 – pull-cord switch · 160 m³/h
- ESLP18628 – backdraft damper · 160 m³/h
- ESLP18929 – damper + timer · 160 m³/h
- ESLP18930 – damper + timer + humidity sensor · 160 m³/h
- ESLP18931 – damper + pull-cord switch · 160 m³/h
Where is it used?
- Bathrooms and showers
- Toilets
- Kitchens
- Storerooms and walk-in wardrobes
- Basements and utility rooms
- Sanitary rooms in offices and small commercial premises
- Laundry and drying rooms
Use by need
For installers, when the fan goes in the ceiling.
The ball-bearing motor suits ceiling mounting and longer operation.For electricians.
Standard Ø120 mm diameter, 220–240 V connection, wall or ceiling mounting.For designers.
Suitable for exhaust ventilation of sanitary, auxiliary and utility rooms – 160 m³/h, 40 Pa.Practical use
If a bathroom measures 2.0 × 2.5 m with a 2.5 m ceiling (about 12.5 m³), the rated flow of 160 m³/h would theoretically change the air about 13 times per hour; in practice the flow will be lower due to duct length, bends and grilles. If the duct joins a shared shaft and back-draught is noticeable, choose the model of this series with a backdraft damper (ESLP18628).Pros
- Ball-bearing motor
- Noise 30 dB(A)
- Low consumption – 16 W
- Wall or ceiling mounting
- IP24 splash protection
Cons / limitations
- No backdraft damper – if there is back-draught, choose ESLP18628
- No timer or humidity sensor – switch-controlled; with timer: ESLP18929
- IP24 – splash protection, not protection against water jets or immersion
- The rated 160 m³/h flow is given without duct resistance; in a long duct it is lower
- No heat recovery – room air is exhausted
Safety and installation notes
- Disconnect the power before installation and make sure the circuit is de-energised.
- Protect the bathroom circuit with a 30 mA residual current device (RCD).
- IP24 means splash protection: under HD 60364-7-701, at least IPX4 is required in zones 1 and 2, and installation in zone 0 (inside a bath or shower tray) is not allowed.
- Mains installation must be carried out by a qualified electrician.
Quick selection guide
Ø120 mm160 m³/h30 dB(A)16 WIP24ball-bearing motorSuitable when you need:- To extract moisture and odours from a bathroom or toilet
- A fan for ceiling mounting
- A compact 181×130×69 mm housing
Check before use:- Whether the duct or opening diameter is Ø120 mm
- Whether there is room for the 181×130×69 mm housing
- Whether a 220–240 V supply is available at the opening
- Whether the room has an air inlet path (gap under the door or a grille)
Important reminder: The fan does not replace continuous mechanical ventilation or a heat recovery unit – it extracts air only while running.FAQ
How is the fan switched on?
By an external switch – a separate one or together with the lighting.Does the fan have a backdraft damper?
No, this model has no damper – the version with a damper is ESLP18628.What duct diameter does ESLP18926 fit?
A Ø120 mm duct or wall opening.Can it be mounted in the ceiling?
Yes, the fan is mounted on a wall or ceiling.Is it suitable for a bathroom?
Yes, the housing is IP24, but do not install it in zone 0 and protect the circuit with a 30 mA RCD.How much power does the fan use?
Power 16 W, current 0.07 A, supply 220–240 V / 50 Hz.Axial exhaust fan with ball-bearing motor | D120 | 160 m³/h | 220V | 181x130x69 mm | plastic | white | IP24
ESLP18926 is a Ø120 mm axial exhaust fan with ball-bearing motor: 160 m³/h, 40 Pa, 30 dB(A), 16 W, IP24. A compact solution for bathrooms, toilets and auxiliary rooms.
Published: 2026-11-13 · Data verified against the supplier specification: 2026-11-13
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Duct centrifugal fan | D125 | 370 m³/h | 52 W | 230 V | 310 Pa | plastic housing | white | 15622Code: 15622Duct centrifugal fan 15622: D125, up to 370 m³/h, 310 Pa, 52 W, 230 V, plastic housing.
Price 93.17 € VAT incl.( 77.00 € VAT excl. )Shut-off damper for round air duct | for ventilation | air handling systems | D100 | silver | galvanized steel | 100USOCode: 04963Round duct shut-off damper, designed to shut off, restrict, or regulate airflow in round air ducts. The damper is used in supply, exhaust, or recirculation air systems where simple and efficient control of air movement within premises is required.
Due to its galvanized steel construction, the product is resistant to corrosion, durable, and suitable for use in residential, commercial, and technical ventilation systems. Manual operation allows easy airflow adjustment without the need for an additional electric actuator or automation system.
Price 6.50 € VAT incl.( 5.37 € VAT excl. )Flexible aluminum air duct | for ventilation | ventilation systems | D100mm | 3m | white | LAO100BCode: 23033Flexible aluminium air duct - a reliable and universal solution for professional and residential ventilation systems. Designed to connect ventilation elements, fans, heat recovery components or other air distribution units.
Due to its low weight, high flexibility and resistance to high temperatures, the duct ensures quick installation, tightness and long-term operation even in more demanding conditions. The white surface blends aesthetically in technical and visible installation areas.
Price 7.20 € VAT incl.( 5.95 € VAT excl. )Supply air ventilation damper in the wall | with filter | mineral wool thermal insulation with foil | D125 | 0,45m | white | 12,5TOV045-01Code: 23041Wall supply air valve Ø125 mm / 450 mm with filter, non-return valve and foil-faced mineral wool insulation. Restores fresh air supply in apartments, houses and offices, dampens street noise, while the foil protects the wool from moisture and dust.
Price 31.45 € VAT incl.( 25.99 € VAT excl. )


























