Products catalog

  • Bimetallic ring cable lug Al/Cu | 95mm² | M12 | crimp | Sofamel TDC/S-95/12 | 111140

    Code: 111140
    Barcode: 8435157309478

    Sofamel TDC/S bimetallic ring lug for 95 mm² Al conductors, M12 stud: aluminium body, fully tin-plated, pre-filled with neutral grease. Connects aluminium cable to copper busbars and terminals without galvanic corrosion. UNE 211024-2.

  • Bimetallic ring lug 95 mm² / M12 for aluminium cables

    Crimp ring cable lug for connecting a 95 mm² aluminium conductor to an M12 stud – copper busbar, switch-disconnector, circuit breaker or transformer terminal. The entire lug is tin-plated, so aluminium does not touch copper directly and no galvanic corrosion occurs in the joint.

    Technical data

    Manufacturer Sofamel (Spain)
    Series / model TDC/S-95/12
    Manufacturer code 111140
    EAN 8435157309478
    Conductor 95 mm², aluminium (Al), round RM/SM or sector SE
    Stud M12 (hole Ø12.9 mm)
    Material aluminium Al 1050 (≥ 99.5 %), stamped from bar
    Plating electrolytic tin ~15 µm on the entire surface
    Barrel inner Ø12.5 mm, outer Ø20.0 mm; filled with neutral grease
    Standard UNE 211024-2, AENOR certified
    Crimping hexagonal die for barrel outer Ø20.0 mm

    Advantages

    • Connects aluminium cable safely to copper busbars and terminals – the tin layer separates Al and Cu.
    • Grease is already inside the barrel – no extra contact paste needed.
    • The tin-plated palm does not oxidise and keeps contact resistance low.
    • Designed for 0.4 kV underground network joints to UNE 211024-2.

    Applications

    0.4 kV service entries with aluminium cables (AXMK, AXPK, NAYY etc.), metering and distribution cabinets, LV side of transformer substations, AC lines of solar power plants with Al cable.

    Installation

    1. Strip the insulation along the full barrel length and brush the oxide off the conductor.
    2. Insert the conductor fully – do not wipe out the grease.
    3. Crimp with a hexagonal die for outer Ø20.0 mm using a hydraulic crimping tool.
    4. Insulate the crimp with heat-shrink tubing.
    5. Tighten the bolt to the torque specified by the equipment manufacturer and re-check after the first hours under load.

    ⚠ Not suitable for copper cable – use copper ring lugs for copper conductors.

    Keywords

    bimetallic lug 95 mm2, Al/Cu cable lug M12, aluminium cable lug, Sofamel TDC/S, crimp aluminium lug

    EN: Tin-plated aluminium ring cable lug for 95 mm² Al conductors, M12 stud, for connecting aluminium cables to copper terminals.

    LT: Alavuotas aliumininis kilpinis antgalis 95 mm² Al gyslai, M12, aliuminio kabeliams jungti prie varinių gnybtų.

    Published: 2026-11-12 · Data verified against the manufacturer datasheet: 2026-11-12

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Aluminium power cable | 4x120mm² | AXMK | Class 2 | 1m | Black
    Code: AXMK 4x120

    AXMK 4×120 mm² aluminium power cable designed for fixed 0.6/1 kV electrical power transmission and distribution lines. The cable features aluminium conductors, XLPE insulation, and a black UV-resistant PVC outer sheath. Suitable for installation outdoors, underground, in dry, damp and wet areas, cable ducts, conduits, and concrete. Maximum operating temperature – 90 °C. 

    Price 15.13 € VAT incl.
    ( 12.50 € VAT excl. )
    Aluminium power cable | 4x120mm² | AXMK | Class 2 | 1000m | Black
    Code: SKU#165996553256573221

    AXMK 4×120 mm² aluminium power cable designed for fixed 0.6/1 kV electrical power transmission and distribution lines. The cable features aluminium conductors, XLPE insulation, and a black UV-resistant PVC outer sheath. Suitable for installation outdoors, underground, in dry, damp and wet areas, cable ducts, conduits, and concrete. Maximum operating temperature – 90 °C.  

    Sold by the drum, i.e. the minimum order quantity is 1000 metres.

    Delivery time: up to 6 weeks. 

    Price 11.04 € VAT incl.
    ( 9.12 € VAT excl. )
    Aluminium power cable | 4x150mm² | AXMK | Class 2 | 500m | black
    Code: SKU#165996595240116261

    Aluminium power cable AXMK 4×150 mm², designed for fixed 0.6/1 kV electrical power transmission and distribution lines. The cable features aluminium conductors, XLPE insulation, and a black PVC outer sheath resistant to UV radiation. Suitable for installation outdoors, underground, in dry, damp and wet areas, cable ducts, pipes, and concrete. Maximum operating temperature – 90 °C.  

    Sold by the drum, i.e. the minimum order quantity is 500 metres.

    Delivery time: up to 6 weeks. 

    Price 14.52 € VAT incl.
    ( 12.00 € VAT excl. )
  • Subscribtion to new arrivals

    privacy policy

    Information