Products catalog

  • Industrial socket board | 1×CEE 32 A 5P + 1×CEE 16 A 5P + 3×SCHUKO | 9 modules | without protection | IP44 | Famatel RW3958 | 3958.0013E

    Code: 3958.0013E
    Barcode: 5903148990767

    Famatel RW3958 3958.0013E is a wall-mounted industrial board with one CEE 32 A 5P, one CEE 16 A 5P (400 V) and three SCHUKO 16 A 230 V sockets and space for 9 modules of protective devices.

    • Sockets: 1×CEE 32 A 5P + 1×CEE 16 A 5P + 3×SCHUKO
    • Space for devices: 9 modules
    • IP rating: IP44
    • Dimensions: 330 × 215 × 150 mm
  • Industrial socket board | 1×CEE 32 A 5P + 1×CEE 16 A 5P + 3×SCHUKO | 9 modules | without protection | IP44 | Famatel RW3958 | 3958.0013E

    Famatel RW3958 3958.0013E is a wall-mounted industrial board with one CEE 32 A 5P, one CEE 16 A 5P (400 V) and three SCHUKO 16 A 230 V sockets and space for 9 modules of protective devices. The sockets are installed and wired; the breakers and RCD are selected by the electrician for the specific installation.

    Key idea:
    The board is supplied without protective devices – a flexible solution when protection has to match the supply line and the connected equipment. Two different three-phase ratings plus three 230 V sockets let you connect, for example, a welder, a compressor and hand tools in one place.
    Sockets
    1×CEE 32 A 5P + 1×CEE 16 A 5P + 3×SCHUKO
    Space for devices
    9 modules
    IP rating
    IP44
    Dimensions
    330 × 215 × 150 mm

    How it works

    The board is wall-mounted; the supply cable enters through a gland and is connected to the incoming devices installed by the electrician on the DIN rail.

    Each socket or socket group is connected via its own circuit breaker, and the whole socket group via an RCD ≤ 30 mA.

    The result is a fixed distribution point where three-phase and single-phase equipment is connected to protected sockets in one place.

    Why choose Famatel 3958.0013E?
    You choose the protection concept yourself: one common 4P RCD or separate RCBOs for each group if a leakage on one circuit must not switch off the others.

    Technical specifications

    Product type Wall-mounted board with socket outlets, without protective devices
    Manufacturer / code Famatel Polska / 3958.0013E (RW3958 series)
    Socket outlets One CEE 32 A 5P, one CEE 16 A 5P (400 V) and three SCHUKO 16 A 230 V sockets
    Protective devices None – space for 9 modules
    Protection rating IP44
    Dimensions 330 × 215 × 150 mm (H × W × D)
    Mounting Wall-mounted
    Enclosure material Thermoplastic, grey
    Barcode (EAN) 5903148990767

    Key functions

    • Sockets installed and wired – only protection needs to be added.
    • 9-module space – fits a 4P RCD (4 modules) and breakers for the sockets.
    • Three-phase CEE 5P sockets – for industrial equipment with locking plugs.
    • Three SCHUKO 230 V sockets – for everyday tools and appliances.
    • IP44 – for indoor rooms and covered outdoor areas.

    Where is it used?

    • Garages with a compressor and lift
    • Car service workshops
    • Metal and wood workshops
    • Warehouses and halls
    • Farm buildings
    • Production workstations

    Use by need

    For installers.
    A wired enclosure with sockets; protection is selected according to the supply line and equipment.
    For service or workshop owners.
    One fixed point for three-phase and single-phase equipment at the workstation.
    For building maintenance.
    A standard solution for technological sockets in halls and warehouses.

    Practical application

    If a service workshop needs to connect a 32 A lift, a 16 A compressor and several hand tools, a 4P RCD 40 A 30 mA, C32 3P and C16 3P breakers for the three-phase sockets and B16 1P breakers for the 230 V sockets are installed, and the board is supplied with a 5×10 mm² cable from a C40 breaker.

    Advantages

    • Sockets installed and wired
    • 9 modules for protection – fits a 4P RCD
    • Flexible protection concept
    • Compact enclosure 330 × 215 × 150 mm
    • Good price-to-function ratio

    Limitations

    • Only one three-phase socket of each rating
    • Without protection – assembly and test measurements required
    • IP44 – not for wash-down areas
    • Not a mobile unit – no inlet plug

    Safety and installation notes

    • The board is supplied without protective devices – before energising, install circuit breakers for each socket group and an RCD ≤ 30 mA (HD 60364-4-41), or provide this protection in the supplying board.
    • Select the supply cable according to the supply protection, not the sum of socket ratings; the cable is protected by the breaker in the upstream board.
    • The phase sequence of all three-phase CEE sockets must be the same (L1-L2-L3 clockwise) – otherwise the motor will run in reverse.
    • N and PE conductors are connected to separate busbars; do not bridge them in the board.
    • The cable must enter through a gland of the correct size; an unsealed entry voids the declared IP rating.
    • Connection and commissioning tests (PE continuity, insulation resistance, Zs, RCD tripping) must be carried out by a qualified electrician.

    Quick selection guide

    1×CEE 32 A 5P
    1×CEE 16 A 5P
    3×SCHUKO
    9 modules
    IP44
    without protection
    Suitable when you need:
    • A fixed socket point with your own selected protection
    • Three-phase and single-phase equipment connected in one place
    • A garage, workshop or production workstation
    Check before use:
    • Which protective devices will be installed and whether they fit into 9 modules
    • Whether the supply cable matches the supply protection
    • Whether the phase sequence of the three-phase sockets is the same
    Important reminder: a board without protection is not ready for use – it must not be energised without breakers and a 30 mA RCD.

    FAQ

    Are breakers installed in the board?
    No – this version is supplied without protection, with space for 9 modules.
    Is an RCD mandatory?
    Yes – sockets up to 32 A used by ordinary persons must be protected by an RCD with IΔn ≤ 30 mA (HD 60364-4-41).
    How many modules will the protection occupy?
    For example, a 4P RCD – 4 modules, a 3P breaker – 3, a 1P breaker – 1 module.
    How does the 3958 series differ from 3957?
    The 3958 has a larger enclosure (330 mm high) and more CEE socket options.
    Which supply cable should be used?
    According to the supply protection: 25 A – usually 5×4 mm², 32 A – 5×6 mm² Cu; the exact size by calculation.
    Can it be used outdoors?
    Under a canopy – yes (IP44); for direct rain or wash-down choose a higher IP rating.

    Industrial socket board | 1×CEE 32 A 5P + 1×CEE 16 A 5P + 3×SCHUKO | 9 modules | without protection | IP44 | Famatel RW3958 | 3958.0013E

    Famatel RW3958 3958.0013E – a 9-module wall board with one CEE 32 A 5P, one CEE 16 A 5P (400 V) and three SCHUKO 16 A 230 V sockets, without protection, IP44, 330 × 215 × 150 mm. A flexible solution for garages, workshops and production halls when protection is selected by the electrician.

    Published: 2026-10-30 · Data verified against supplier specification: 2026-10-30

    Published: 2026-11-15 · Data verified against the manufacturer / supplier specification: 2026-11-15

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Single-cable membrane entry flange | for Ø86 mm hole | cable Ø55–70 mm | flange Ø123.1 mm | grey | IP67 | HT Hi Tech Polymers | HTX-1
    Code: Sandariklis HTX-1

    HTX-1 is a membrane entry flange for one thick power cable Ø55–70 mm. It fits a round Ø86 mm hole in the enclosure wall, flange diameter Ø123.1 mm. Sealing rating is IP67 according to the latest manufacturer's sheet.

    Price 21.78 € VAT incl.
    ( 18.00 € VAT excl. )
    Terminal | connector paste for contacts | reduces oxidation | 35.3g | WAGO | ALU PLUS | 249-130 | for connecting aluminium and copper wires
    Code: 4017332133890

    Contact paste designed to protect aluminum conductors from oxidation and ensure a reliable electrical connection. This special paste allows aluminum and copper conductors to be safely and efficiently connected within the same connector, making it particularly useful when renovating older electrical installations where aluminum wiring is commonly found.

    Aluminum naturally oxidizes, and the resulting oxide layer increases contact resistance, causes connection heating, and may become a source of electrical faults. By using WAGO ALU-PLUS, the oxidation layer is reduced, electrical conductivity is improved, and the service life of the connection is significantly extended. 

    Price 2.83 € VAT incl.
    ( 2.34 € VAT excl. )
    Wire connector | universal electrical terminal | 5x0.2–4mm² | for all conductor types | WAGO | 221-415 | 4055143234658
    Code: WAGO 221-415

    WAGO 221-415 is a universal 5-conductor wire connector designed for fast and reliable connection of different conductor types. It is suitable for 0.2–4 mm² conductors, including solid, stranded and flexible wires. The transparent housing and lever design make wire insertion, inspection and reconnection easy.

    Price 0.57 € VAT incl.
    ( 0.47 € VAT excl. )
    Cable gland with locknut and gasket | PG7 | for cable Ø3–6.5 mm | grey | IP68 | 4772124000810
    Code: 00810

    Plastic PG7 cable gland with locknut and gasket for routing Ø3–6.5 mm round cables into distribution boards and junction boxes. Provides IP68 sealing when correctly installed.

    Price 0.20 € VAT incl.
    ( 0.17 € VAT excl. )
  • Subscribtion to new arrivals

    privacy policy

    Information