Modular memory impulse relay | AC 230 V | 16 A | 1 CO | DIN 1 module | GEYA GRM8-01
Code: ESGRM8Price 20.40 € VAT incl.( 16.86 € VAT excl. )An electronic impulse time relay with memory function, designed for the control and protection of electrical circuits. Due to low power consumption, a sealed design, and DIN rail mounting, this relay is widely used in residential, commercial, and industrial applications. The relay operates on an impulse (latching) principle – the state is retained even in the event of a power loss, making it a highly effective solution where stable, reliable, and energy-efficient control is required.
-
Modular memory impulse relay | AC 230 V | 16 A | 1 CO | DIN 1 module | GEYA GRM8-01
Electronic impulse (latching) relay for controlling lighting and other loads from several locations with ordinary push-buttons. Each short pulse to control terminal S toggles the changeover contact to the opposite state. The memory function keeps the state after a power failure.
Key idea:
Supply and control at 230 V AC – suitable for standard residential and commercial lighting circuits. Instead of two-way and intermediate switches – push-buttons in parallel and one 18 mm relay in the panel.Contacts
1 CO, 16 ASupply
AC 230 VFunction
impulse + memoryMounting
DIN, 1 moduleOperating principle
Supply is connected to terminals A1-A2, momentary push-buttons in parallel between A1 and control terminal S. Minimum impulse length is 25 ms.
Each press toggles the output: ON – OFF. The green LED shows supply, the red LED shows the output state.
Memory function: during a power failure the relay switches off, and when voltage returns it restores its previous state.
Why choose GRM8-01?
Electronic control with memory, LED indication and support for illuminated push-buttons (up to 75 pcs) – convenient in staircases, corridors and commercial premises.Technical specifications
Product type Electronic memory impulse (latching) relay Manufacturer / model GEYA GRM8-01 AC 230 V Supply voltage (A1-A2) AC 230 V, 50–60 Hz Control terminals A1-S Output contacts 1 CO (1 × SPDT), 16 A / AC1 Switching voltage 250 V AC Control impulse length min. 25 ms Illuminated push-buttons allowed, up to 75 pcs (0.68 mA, 230 V AC) Mechanical life (cycles) 10 000 000 Electrical life (cycles) 100 000 (AC1) Indication green LED – supply, red LED – output Operating temperature −20…+55 °C Degree of protection IP40 (front panel) / IP20 (terminals) Cable cross-section 1 × 2.5 mm² or 2 × 1.5 mm² Mounting DIN rail EN/IEC 60715, 1 module (18 mm) Standard EN 61810-1 Main features
- Impulse control – each press toggles the state
- Control from many places – push-buttons in parallel
- State memory – restores the previous state when voltage returns
- LED indication – supply and output state
- 1 CO 16 A – changeover contact for the load
- 18 mm width – one DIN module
Applications
- Staircases and long corridors
- Large rooms with several entrances
- Offices, shops, warehouses
- Detached houses and cottages
- Lighting groups in 230 V panels
- Automation panels and control cabinets
Use by need
For the installer.
Simple wiring: push-buttons in parallel, load via the panel, state visible on the LED.For automation engineers.
Impulse control with memory – handy in control and signalling circuits.For home or building owners.
Lighting from several places, and the state recovers by itself after a power cut.Practical example
A three-storey staircase: a push-button on each floor, all wired in parallel to A1-S. The staircase lighting is switched via the GRM8-01 contact. After a power cut and restoration the lighting returns to its previous state.Pros
- Control from any number of places
- State memory
- LED indication
- Illuminated push-buttons allowed (up to 75 pcs)
- One DIN module
Cons / limitations
- No manual switch on the front
- 16 A / AC1 – for large LED or motor loads use a contactor
- No overload or short-circuit protection – a circuit breaker is required
Safety and installation notes
- Install only with the power disconnected; panel work must be done by a qualified electrician.
- Protect supply and load circuits with a circuit breaker.
- Use momentary (non-latching) push-buttons.
- Do not exceed 16 A / AC1; leave a margin for LED groups with high inrush current or use a contactor.
Quick selection guide
1 CO, 16 AAC 230 VmemoryDIN 1 moduleSuitable when you need to:- Control lighting from several places
- Keep the state after a power failure
- See the state in the panel (LED)
Check before use:- Control voltage matches AC 230 V
- Load current does not exceed 16 A
- Push-buttons are momentary (non-latching)
Important reminder: GRM8-01 switches the load but is not a protective device – the circuit must be protected by a circuit breaker.FAQ
How many push-buttons can be connected?
Practically unlimited – they are connected in parallel.What happens after a power failure?
The relay switches off and restores its previous state when voltage returns.Can illuminated push-buttons be used?
Yes, up to 75 pcs (0.68 mA, 230 V AC).How much panel space does it take?
One DIN module – 18 mm.Keywords
impulse relay, memory relay, latching relay, step relay, AC 230 V relay, 16A relay, 1 CO, lighting control from several places, GEYA GRM8-01, GRM8-01, DIN relay
Modular memory impulse relay | AC 230 V | 16 A | 1 CO | DIN 1 module | GEYA GRM8-01
GEYA GRM8-01 – electronic memory impulse (latching) relay, supply AC 230 V, 1 CO 16 A, 18 mm DIN, LED indication. Controls lighting and other loads from any number of locations.
Published: 2026-11-19 · Data verified against the manufacturer datasheet: 2026-11-19
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Terminal clamp | electrical wire connector | universal | 2x0.2-4mm² | for all wire types | WAGO | 221-412 | 4050821808435Code: WAGO 221-412The WAGO 221-412 connector is one of the most popular and reliable electrical wire connection solutions in the world. It is designed for fast, safe, and professional connection of various types of copper conductors without the need for additional tools.
Thanks to the patented CAGE CLAMP® technology and convenient orange levers, this connector allows quick connection of solid, stranded, and flexible conductors. The transparent housing enables visual inspection of the connection quality, while its compact dimensions allow easy installation in junction boxes, distribution boards, luminaires, and various automation equipment.
The WAGO 221 series is widely used in residential, commercial, and industrial applications where reliable, standards-compliant, and long-lasting wire connections are required.
Price 0.30 € VAT incl.( 0.25 € VAT excl. )















