Extractor fan with backdraft shutter | D150 | 250 m³/h | 230V | 205x205x105mm | IP24 | ABS plastic | white | PL6S
Code: 04200Price 20.11 € VAT incl.( 16.62 € VAT excl. )The fan is used for continuous or periodic ventilation in bathrooms, showers, kitchens, and other domestic rooms.
With a back-draught shutter, which prevents unpleasant odors from entering the room.
There is a blue LED light on the front that lights up when the fan is turned on.
Features high performance and low noise. Long service life is ensured by a reliable, low-energy consuming electric motor and aerodynamically shaped blades.
The motor with a ball bearing requires no additional maintenance and allows the fan to be installed both vertically and horizontally (after removing the back-draught shutter).
Installation is done using self-tapping screws included in the package.
Ultra-thin frame
Light indication
Low energy consumption
Low noise
Motor with ball bearing
Plastic back-draught shutter
Overheating protection
Screw fixation
-
Extractor fan with backdraft shutter | D150 | 250 m³/h | 230V | 205x205x105mm | IP24 | ABS plastic | white | PL6S
The extractor fan with backdraft shutter PL6S removes stale air from bathrooms, toilets, kitchens and storage rooms. It is mounted in a wall or ceiling into a Ø150 mm duct or opening and removes moisture and odours; the backdraft shutter prevents air from flowing back.
v=>[(v.q?v.q+' m³/h airflow':'')+(v.db?(v.q?', ':'')+v.db+' dB(A) noise':'')+(v.pw?' and '+v.pw+' W power':'')+(v.q||v.db?' – a practical choice for a domestic room.':''),v.f.H?'The humidity sensor switches the fan on when humidity rises after a shower and off once the room is dry – no need to think about the switch.':v.f.T?'The timer keeps the fan running for a while after the light is switched off, so moisture and odours are fully removed.':v.f.C?'The pull-cord switch removes the need for a separate wall switch – convenient in renovations.':'It is usually connected to the light switch: the fan runs while the light is on.',v.f.V?'The backdraft shutter keeps cold air, odours and dust from the duct out when the fan is off.':''].filter(Boolean).join(' ')
250 m³/h airflow, 33 dB(A) noise and 10 W power – a practical choice for a domestic room. It is usually connected to the light switch: the fan runs while the light is on. The backdraft shutter keeps cold air, odours and dust from the duct out when the fan is off.Duct diameter
Ø150 mmAirflow
250 m³/hNoise level
33 dB(A)Control
wall switchHow it works
An axial impeller driven by a 230 V motor extracts air from the room into a duct or ventilation shaft, while fresh air enters through the door gap or supply air vents. When the fan is switched off, the backdraft shutter closes and stops reverse airflow.
Why choose PL6S?
A quiet, energy-saving solution for a standard Ø150 mm opening.Technical specifications
Product type Extractor fan with backdraft shutter Model PL6S Product code 04200 Duct (mounting) diameter 150 mm Dimensions (H × W × D) 205 × 205 × 105 mm Mounting dimensions 187 × 187 mm Spigot depth 86 mm Supply voltage 230 V AC Power 10 W Airflow 250 m³/h Pressure 54 Pa Noise level 33 dB(A) Ingress protection IP24 – protected against splashing water Backdraft shutter Yes Control External switch (e.g. light switch) Housing material ABS plastic Colour White Warranty 5 years Key features
- Airflow 250 m³/h – sufficient for a bathroom, toilet or storage room
- 33 dB(A) – quiet operation that does not disturb adjacent rooms
- 10 W power – low energy consumption
- IP24 – protection against splashing water in damp rooms
- Backdraft shutter – keeps cold air, odours and dust from the duct out when off
Where is it used?
- Bathrooms
- Toilets
- Kitchens (general ventilation, not instead of a cooker hood)
- Laundry and drying rooms
- Storage rooms, basements
- Changing rooms, small offices
Pros
- Quiet operation – 33 dB(A)
- Low power – 10 W
- IP24 protection for damp rooms
- Standard Ø150 mm opening
- 5-year warranty
- Backdraft shutter in the housing
Cons / limitations
- No timer or humidity sensor – for that, choose fans with a timer or humidity sensor
- IP24 – do not install where a direct water jet can reach
Safety and installation notes
- Install only with the power disconnected; connection must be made by a qualified electrician
- In bathrooms, follow the zone requirements of HD 60364-7-701
- Duct diameter is 150 mm; do not reduce the cross-section and avoid long ducts with many bends
- Ensure a fresh-air inlet into the room (door gap or supply air vent)
FAQ
Which duct does it fit?
A Ø150 mm duct or opening in a wall or ceiling.How is the fan controlled?
With an external switch, usually together with the light.Does it have a backdraft shutter?
Yes, the shutter is built into the housing and closes when the fan stops.Is it suitable for a bathroom with a shower?
Yes, IP24 protects against splashes; install outside the reach of a direct water jet and follow the zone requirements.Extractor fan with backdraft shutter | D150 | 250 m³/h | 230V | 205x205x105mm | IP24 | ABS plastic | white | PL6S
Extractor fan with backdraft shutter Ø150 mm: 250 m³/h, 33 dB(A), IP24 – for bathrooms, toilets and kitchens.
Published: 2026-11-17 · Data according to supplier specification
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.ManufacturerThis product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Shut-off damper for round air duct | for ventilation | air handling systems | D100 | silver | galvanized steel | 100USOCode: 04963Round duct shut-off damper, designed to shut off, restrict, or regulate airflow in round air ducts. The damper is used in supply, exhaust, or recirculation air systems where simple and efficient control of air movement within premises is required.
Due to its galvanized steel construction, the product is resistant to corrosion, durable, and suitable for use in residential, commercial, and technical ventilation systems. Manual operation allows easy airflow adjustment without the need for an additional electric actuator or automation system.
Price 6.50 € VAT incl.( 5.37 € VAT excl. )Supply air ventilation damper in the wall | with filter | mineral wool thermal insulation with foil | D125 | 0,45m | white | 12,5TOV045-01Code: 23041Wall supply air valve Ø125 mm / 450 mm with filter, non-return valve and foil-faced mineral wool insulation. Restores fresh air supply in apartments, houses and offices, dampens street noise, while the foil protects the wool from moisture and dust.
Price 31.45 € VAT incl.( 25.99 € VAT excl. )Flexible aluminum air duct | for ventilation | ventilation systems | D100mm | 3m | white | LAO100BCode: 23033Flexible aluminium air duct - a reliable and universal solution for professional and residential ventilation systems. Designed to connect ventilation elements, fans, heat recovery components or other air distribution units.
Due to its low weight, high flexibility and resistance to high temperatures, the duct ensures quick installation, tightness and long-term operation even in more demanding conditions. The white surface blends aesthetically in technical and visible installation areas.
Price 7.20 € VAT incl.( 5.95 € VAT excl. )Duct centrifugal fan | D125 | 370 m³/h | 52 W | 230 V | 310 Pa | plastic housing | white | 15622Code: 15622Duct centrifugal fan 15622: D125, up to 370 m³/h, 310 Pa, 52 W, 230 V, plastic housing.
Price 93.17 € VAT incl.( 77.00 € VAT excl. )
























