Products catalog

Home/Product Catalog/Electrical distribution and installation/Electrical Energy Supply | Distribution Panels | Boxes | Accessories/Sealing products | seals for electrical wires | cables | panels | boxes/Cable | wire glands with nut and gasket | reliable protection against moisture | dust
  • New item   Cable gland with nut and seal | PG36 | for cable Ø22–32 mm | black | IP68 | ES-PG36B
    New item   Cable gland with nut and seal | PG36 | for cable Ø22–32 mm | black | IP68 | ES-PG36B 1
    New item   Cable gland with nut and seal | PG36 | for cable Ø22–32 mm | black | IP68 | ES-PG36B 2

    Cable gland with nut and seal | PG36 | for cable Ø22–32 mm | black | IP68 | ES-PG36B

    Code: ES-PG36B
    Inquire about this item
    Price 1.09 € VAT incl.
    ( 0.90 € VAT excl. )
    Want another price? Suggest yours!

    ES-PG36B is a black cable gland with nut and seal, PG36 thread, for one cable with an outer Ø of 22–32 mm. Protection IP68 (according to supplier data), intended for incoming and riser cables.

  • Product description

    Cable gland with nut and seal | PG36 | for cable Ø22–32 mm | black | IP68 | ES-PG36B

    ES-PG36B is a black cable gland with nut and seal for bringing one cable with an outer Ø of 22–32 mm into a board or enclosure through a PG36 entry. The gland is screwed into the enclosure, and the tightened nut compresses the seal around the cable. According to supplier data, the protection degree is IP68.

    Key point:
    PG36 is most often needed for incoming and riser cables – when the supply is brought into a house main board or a staircase board of an apartment block. Cables of this Ø are typically 4–5-core 25–35 mm² copper power cables – this is only a guide, because the gland is selected by the outer cable Ø, which is worth measuring with a caliper. When a thick cable enters through an open hole or a wrongly sized gland, moisture and dust get into the board.
    Thread
    PG36
    Cable Ø
    22–32 mm
    Protection
    IP68
    Colour
    Black

    How it works

    Measure the outer cable Ø and prepare a PG36 entry in the enclosure.

    The gland is screwed into the enclosure, the cable is pushed through and the nut is tightened by hand and with a spanner.

    The seal grips the cable sheath – the entry is sealed (IP68) and the cable is held in place.

    Why choose ES-PG36B?
    One size covers cables from Ø22 to Ø32 mm, so there is no need to hunt for an exact match for every cable on site. Tightness comes from the seal and the nut, not from sealant, so the entry looks neat and can be loosened when the cable is replaced.

    Technical specifications

    Product type Cable gland with nut and seal
    Code ES-PG36B
    Thread PG36 (DIN 40430)
    Thread outer Ø 47.0 mm
    Thread length 16 mm
    Cable Ø (clamping range) 22–32 mm
    Number of cables 1
    Protection degree IP68 (EN 60529), according to supplier data
    Colour Black
    Installation Screwed into the enclosure / board, tightened by hand and with a spanner
    Certificates CE, SGS, RoHS (according to supplier data)

    Main functions

    • Seals the cable entry – the seal grips the sheath, IP68
    • Holds the cable – the tightened nut stops it from sliding freely
    • Closes the enclosure opening – moisture and dust stay out of the board
    • Protects the sheath – the cable does not touch the sharp edge of the hole
    • PG36 thread – screwed into the enclosure or board
    • Range Ø22–32 mm – one size for several cable types

    Where is it used?

    • Incoming cables of detached houses into the main board
    • Riser boards in apartment blocks
    • Distribution boards in commercial premises
    • Power boards of boiler rooms and heat substations
    • Construction site distribution boards
    • AC connection boards of larger PV plants

    Use by need

    For the designer.
    The Ø22–32 mm range covers a wide band of incoming cables, so the specification is easier to match with the actual cable.
    For the panel builder.
    The main board enclosure is prepared for one thick cable with an IP68 gland.
    For the building manager.
    The entry into the board stays closed – less dust and moisture reach the incoming devices.

    Practical application

    If, during a house supply upgrade, a cable with an outer Ø of 29 mm is brought into the board, ES-PG36B is the right size: a PG36 entry is prepared in the enclosure, the gland is screwed in, the cable is pushed through and the nut is tightened with a spanner.

    Pros

    • IP68 according to supplier data
    • Wide range – Ø22–32 mm in one size
    • The tightened nut holds the cable – no sealant needed
    • Installed by hand and with a spanner, no special tools
    • CE, SGS, RoHS – according to supplier data
    • Black colour matches dark enclosures, machines and equipment
    • Complete ES-PG series – from PG7 to PG63, grey and black

    Cons / limitations

    • The supplier does not state the material or operating temperature – check for special conditions (heat, chemicals)
    • IP68 immersion conditions (depth, duration) are not stated – check before permanent underwater use
    • One gland – one cable; several cables need several entries or a membrane entry plate
    • For a cable thinner than Ø22 mm choose ES-PG29B (Ø18–25 mm), for one thicker than Ø32 mm – ES-PG42B (Ø32–38 mm)
    • Suitable only for round cable – the seal will not grip a flat cable tightly

    Safety and installation notes

    • Work in the board only with the power disconnected and absence of voltage verified
    • After drilling or cutting, remove swarf from the board and clean the edge of the hole
    • Measure the outer cable Ø with a caliper before installation – it must be within 22–32 mm
    • Tighten the nut evenly: first by hand, then with a spanner, do not overtighten
    • Do not bring several cables through one gland

    Quick selection guide

    Thread: PG36, outer Ø 47.0 mm
    Cable: Ø22–32 mm
    Protection: IP68
    Colour: black
    Suitable when you need:
    • to bring one cable Ø22–32 mm into a board or enclosure
    • IP68 tightness at the cable entry
    • a black entry for dark enclosures or machines
    Check before use:
    • outer cable Ø (22–32 mm)
    • entry size and thread – PG36, outer Ø 47.0 mm
    • whether the wall thickness allows a 16 mm long thread
    Important reminder: ES-PG36B seals a single-cable entry, but it is not a fire barrier and does not replace cable fixing along the route; several cables need several entries or a membrane entry plate.

    FAQ

    What cable size does ES-PG36B fit?
    One cable with an outer Ø of 22–32 mm; the conductor cross-section in mm² does not determine the gland size.
    What entry is required?
    PG36 thread, outer Ø 47.0 mm according to DIN 40430; thread length 16 mm.
    Can several cables pass through one gland?
    No – one gland is for one round cable; several cables need several entries or a membrane plate, e.g. HIK-1 or HIK-2 (up to Ø64 mm).
    What material is it made of and what temperature is it rated for?
    The supplier does not state the material or operating temperature, so we do not claim them; if your project requires this, contact us before ordering.
    Is the black version more UV resistant?
    The supplier does not state UV resistance – black is chosen for the look of the enclosure; the same size in grey is ES-PG36.
    Cable Ø exactly 32 mm – will ES-PG36B fit?
    32 mm is the upper limit of ES-PG36B; measure the cable at several points and, if it is larger, choose ES-PG42B (Ø32–38 mm).

    Cable gland ES-PG36B, black, IP68

    ES-PG36B is a black PG36 cable gland with nut and seal for one cable Ø22–32 mm, IP68. Intended for incoming and riser cables.

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.

  • Alternative products

    CYKY 5x4 | Copper power cable | CYKY-L 5G4 | 1m | black  
    CYKY 5x4 | Copper power cable | CYKY-L 5G4 | 1m | black
    Code: 91950413
    Price 3.68 € VAT incl.
    ( 3.04 € VAT excl. )
    Add to cart 

  • Subscribtion to new arrivals

    privacy policy

    Information