Products catalog

  • IR proximity switch-dimmer for mirrors | human detection 0.8 m | touch dimming | 12/24 V DC | 5 A | ELSP-XM319-IR5

    Code: ELSP-XM319-IR5

    IR proximity switch-dimmer mounted behind the mirror for 12/24 V DC LED strips. The light turns on when a person comes within 0.8 m, turns off 10 s after they leave, and brightness is adjusted by touching the mirror (up to 6 mm thick). The memory function stores the last light state.

  • IR proximity switch-dimmer for mirrors | human detection 0.8 m | touch dimming | 12/24 V DC | 5 A | ELSP-XM319-IR5

    A compact switch-dimmer mounted behind the mirror that controls a 12/24 V DC LED strip. The light turns on by itself when a person comes within 0.8 m, turns off 10 s after they leave, and brightness is adjusted by touching the mirror surface.

    Key point:
    The mirror needs no visible button or wall switch: the light greets the user automatically, and brightness is set with a touch. It is a simple way to build or upgrade an illuminated bathroom or hallway mirror.
    Supply
    12 V DC / 24 V DC
    Load
    5 A · 60 W (12 V) / 120 W (24 V)
    Detection
    person up to 0.8 m · off after 10 s
    Mirror thickness
    touch ≤ 6 mm

    Operating principle

    The switch is glued to the back of the mirror and connected between the 12/24 V DC power supply and a single-colour LED strip.

    The IR proximity sensor detects an approaching person (up to 0.8 m) and switches the lighting on, while touch control through the glass (up to 6 mm) adjusts brightness. When no one is detected for 10 s, the lighting turns off.

    The memory function stores the last light state. Backlight indication shows the status: white when on, blue when off, so the switch position is easy to find in the dark.

    Why choose ELSP-XM319-IR5?
    One module replaces a switch, a proximity sensor and a dimmer. The mirror surface stays clean without visible buttons, and wiring only needs to reach the power supply.

    Technical specifications

    Product type IR proximity and touch switch-dimmer, mounted behind the mirror
    Code ELSP-XM319-IR5
    Supply voltage 12 V DC / 24 V DC
    Rated current 5 A
    Max. load 60 W at 12 V; 120 W at 24 V
    Standby current ≤ 50 mA
    Load type Single-colour constant-voltage LED strip (no CCT control)
    Control IR proximity detection + touch dimming through glass
    Proximity detection range up to 0.8 m
    Touch sensing through a mirror up to 6 mm thick
    Switch-off delay 10 s
    Dimming Yes, with memory function
    Status indication on – white, off – blue
    Dimensions 61 × 44 × 13 mm
    Operating temperature -40 °C … +45 °C (max. housing surface 70 °C)
    Relative humidity 25–90 % RH
    Mounting Glued to the back of the mirror; 3M tape for positioning, glass adhesive or 703/704 silicone for final fixing
    EMC compliance EN 55032, EN 55035, EN 61000-3-2, EN 61000-3-3; CE

    Main functions

    • Automatic switch-on up to 0.8 m – the light turns on as you approach the mirror, without touching it.
    • Switch-off after 10 s – no lighting left on in an empty room.
    • Touch dimming – brightness is adjusted directly through the mirror glass.
    • Memory function – restores the last used light state.
    • Two-colour indication – the switch position is easy to find in the dark.
    • 12 V and 24 V support – fits both of the most common LED strip voltages.

    Where is it used?

    • Bathroom mirrors with LED lighting
    • Hallway and entrance mirrors
    • Mirror cabinets and bathroom furniture
    • Workstation mirrors in beauty salons and barbershops
    • Hotel bathrooms
    • Wardrobe and fitting-room mirrors
    • Series production by mirror manufacturers

    Use by need

    For mirror and furniture makers.
    One compact module provides full control without mechanical buttons or extra openings in the frame.
    For hotels and salons.
    Guests find the light intuitively, and automatic switch-off reduces unnecessary burning.
    For home renovation.
    An existing mirror with an LED strip can be upgraded with modern touchless control.

    Practical use

    If a bathroom mirror is lit by a 24 V LED strip of up to 120 W, the switch is connected between the power supply and the strip: in the morning the light comes on as you approach, and at night brightness can be lowered by touch so it does not dazzle.

    Pros

    • No visible switch needed
    • Touchless switch-on when approaching
    • Dimming and memory function
    • Suitable for 12 V and 24 V systems
    • Automatic switch-off after 10 s
    • Compact, hidden behind the mirror

    Cons / limitations

    • Touch works only through mirrors up to 6 mm
    • The IR sensor position must be matched to the mirror coating and design
    • Single-colour strip only – CCT (warm/cool) not controlled
    • Ingress protection (IP) not specified – install in an enclosed space behind the mirror

    Safety and installation notes

    • Connect only to a safety extra-low voltage (SELV) 12/24 V DC power supply – never directly to 230 V mains.
    • Observe polarity and do not exceed 60 W (12 V) / 120 W (24 V) load.
    • Test operation with the switch temporarily fixed by 3M tape before final gluing.
    • Use glass adhesive or 703/704 silicone for final fixing.
    • Protect the module and connections from water and condensation.
    • Do not use to control heating elements or other non-LED loads.

    Quick selection guide

    12/24 V DC
    5 A | 60/120 W
    detection 0.8 m | 10 s
    dimmer | no CCT
    Suitable when you need to:
    • switch mirror lighting on automatically as someone approaches;
    • dim a single-colour LED strip by touch;
    • hide the controls behind the mirror.
    Check before use:
    • mirror thickness (≤ 6 mm);
    • whether the mirror coating in the IR sensor area interferes with detection (follow the installation instructions);
    • LED strip voltage and total power.
    Important reminder: the switch does not control colour temperature and is not intended for mirror heating. To control a heating mat, use the power supply with relay for mirror heating mat (ELSP-XMP-12V036W).

    FAQ

    Can it be connected directly to 230 V?
    No – a 12 V or 24 V DC LED power supply is required.
    What LED strip can be connected?
    One with a total power of no more than 60 W at 12 V or 120 W at 24 V.
    Will it work through a mirror thicker than 6 mm?
    The touch function is designed for mirrors up to 6 mm thick.
    Can it control warm and cool white (CCT)?
    No, this model controls a single-colour LED strip only.
    Does it remember the last state?
    Yes, the memory function restores the last used light state.
    When does the light turn off?
    10 s after the sensor no longer detects a person.

    IR proximity switch-dimmer for mirrors | 12/24 V DC | 5 A | ELSP-XM319-IR5

    IR proximity switch-dimmer mounted behind the mirror for 12/24 V DC LED strips: turns the light on when a person comes within 0.8 m, off after 10 s, dims by touch through glass up to 6 mm and remembers the last state.

    Published: 2026-11-12 · Data based on supplier specification: 2026-11-12

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Smart lighting controller | dimmer | 150W LED / 200W | 100-240V | Wi-Fi | RF 433MHz | SONOFF | D1
    Code: SONOFF-D1

    SONOFF D1 is a smart Wi-Fi and RF 433 MHz lighting dimmer for dimmable LED lamps up to 150 W and incandescent lamps up to 200 W. Controlled with the eWeLink app, the RM433 remote and by voice. Installed in an EU / 86-type box.

    Price 17.40 € VAT incl.
    ( 14.38 € VAT excl. )
    Flexible copper cable H05VV-F | 3G1.5 mm² | 300/500 V | round | white | 1 m | Lietkabelis
    Code: 92331501

    H05VV-F 3G1.5 mm² – AB Lietkabelis flexible round copper cable with class 5 conductors, PVC insulation and a white PVC sheath, 300/500 V. Sold by the metre.

    Cores: L, N, PE. Indicative current ≈ 16 A – for household appliances indoors.

    Price 1.04 € VAT incl.
    ( 0.86 € VAT excl. )
    Cable sheath and wire stripper 0.2–4.0 mm² | ErgoStrip KNIPEX
    Code: 169501SB

    KNIPEX high-quality, ergonomically designed wire and cable stripping tool for fast, precise, and safe work. This stripping knife is highly favored by professional electricians for its versatility, durability, and practical design. Suitable for removing insulation from both signal and power wires, as well as for installation, data, and coaxial cables.

    Perfectly suited for use on construction sites and in domestic installations, especially where wires need to be quickly and accurately prepared for connection in confined spaces. 

    Price 48.40 € VAT incl.
    ( 40.00 € VAT excl. )
    Sealing protective mastic tape | 25x1x500mm | for sealing cable mechanical damage area | S1052-1-500
    Code: S 1052-1-500

    Specialized self-fusing sealing tape designed for protecting and sealing damaged areas on cables. Made from black thermoplastic, highly flowable mastic, this tape effectively shields cable insulation damage from moisture, corrosion, and dust. Used for emergency or preventive repair of electrical, telecommunication, and signal cables, especially suitable for outdoor and damp environments.

    Price 7.87 € VAT incl.
    ( 6.50 € VAT excl. )
    Wireless control kit | actuator RFSA-61B and wall controller RFWB-40 | 866-916MHz | 230VAC | iNELS RF | RFSET-SW-F1
    Code: RFSET-SW-F1

    iNELS RF RFSET-SW-F1 is a wireless control kit: RFSA-61B actuator (230 V AC, 1 changeover contact 16 A AC1, 6 functions) and RFWB-40 wall controller (CR2032, about 5 years). RFIO2 communication up to 200 m, works without internet.

    Price 63.90 € VAT incl.
    ( 52.81 € VAT excl. )
  • Subscribtion to new arrivals

    privacy policy

    Information