Panel-mounted | digital pulse | meter | counter | calibrator | electronic ruler | for conveyor system | 12VDC | 10mm wheel

Technical Specifications:

Panel dimensions: 72 × 72 mm

Mounting hole size: 68 × 68 mm

Power supply: 12 V DC

U‑type wheel slot width: 10 mm (total wheel width: 15 mm)

Relay outputs: 2 units (AL1 and AL2), each supports up to 10 A current

Display lines:

Top line: active count

Bottom line: preset value / total count / batch count

Reset functions: automatic or manual reset to zero

Operating modes:

Normal mode

Total production mode

Batch mode

Main Functions:

Two‑level relay alerts: enable two separate thresholds (e.g., AL1 = 90, AL2 = 100) and automate device control at set values.

Automatic or manual counter reset to zero.

Three operating modes:

Normal mode: standard counting with dual relay output.

Total count mode: top line resets to zero at limit, bottom line displays accumulated total.

Batch counting: each cycle increments batch count by one.

High accuracy and reliability: suitable for intensive industrial use.

Intuitive display: clear digital representation of top and bottom lines.

Applications:

Measuring yarn length in textile and spinning mills

Counting yarns, threads, ribbons, or other linear materials on production lines

For batch management, quality control, or production distribution by quantity

Applicable in other areas requiring measurement of length or cycle counts (e.g., film, wire, tube manufacturing)

Pros:

Dual relay output – ideal for automated lines

Clear and informative display – easy to use even without extensive training

Robust, reliable, and resistant to frequent use

Cons:

Requires 12 V power supply (not included)

Factory settings are optimized for “normal mode” — other modes need additional configuration