Products catalog

  • Power amplifier (PWM repeater) for ELSP-XM319 mirror switches | 12–24 V DC | 10 A | 120 W (12 V) / 240 W (24 V) | ELSP-XM-ST001

    Code: ELSP-XM-ST001

    PWM power amplifier (repeater) that extends the load of ELSP-XM319 series mirror switches up to 10 A: 120 W at 12 V and 240 W at 24 V. Keeps dimming, housing 32 × 25 × 14 mm.

  • Power amplifier (PWM repeater) for ELSP-XM319 mirror switches | 12–24 V DC | 10 A | 120 W (12 V) / 240 W (24 V) | ELSP-XM-ST001

    PWM power amplifier (repeater) for ELSP-XM319 series mirror switches, when a single switch's 5 A is not enough for a long LED strip. Load up to 10 A: 120 W at 12 V and 240 W at 24 V, dimming is retained.

    Key point:
    The LED strip of a large mirror or mirror wall may exceed the 5 A switch limit. The amplifier takes the switch's PWM signal and repeats it on a more powerful output – the switch controls, the amplifier carries the load. Power depends on voltage: 10 A at 12 V = 120 W, at 24 V = 240 W.
    Voltage
    12–24 V DC
    Current
    up to 10 A
    Power
    120 W (12 V) / 240 W (24 V)
    Dimensions
    32 × 25 × 14 mm

    Operating principle

    The amplifier is connected to the output of an ELSP-XM319 series switch and to the power supply. The switch PWM signal is repeated at the amplifier output, so switching on/off and dimming work just as without it. Wire according to the supplier diagram.

    Why choose ELSP-XM-ST001?
    It lets you use the same switch for large mirrors – the control stays the same, only power is added.

    Technical specifications

    Product type PWM power amplifier (repeater) for LED load
    Product code ELSP-XM-ST001
    Input / output voltage 12–24 V DC
    Max. current 10 A
    Max. load 120 W at 12 V, 240 W at 24 V
    Control PWM signal from the switch
    Compatibility ELSP-XM319 series mirror switches
    Dimensions 32 × 25 × 14 mm

    Key functions

    • Power extension – load up to 10 A.
    • Keeps dimming – the PWM signal is repeated.
    • 12 and 24 V – suitable for both voltages.
    • Small housing – 32 × 25 × 14 mm.

    Where is it used?

    • Large bathroom mirrors and mirror walls
    • Long LED strips around the mirror
    • Mirrors with several lighting zones

    Use by need

    For mirror manufacturers.
    One switch for all mirror sizes.
    For installers.
    A power shortage solved without changing the switch.
    For designers.
    Up to 240 W in a 24 V system.

    Practical example

    A 1600 × 900 mm mirror with 8 m of 12 V strip (9.6 W/m, 77 W). The switch allows 5 A (60 W) – not enough. With the amplifier (120 W at 12 V) the load is about 64 %. The power supply must be at least ~100 W.

    What else does the mirror kit need?

    You also need:

    ELSP-XM319 series switch
    e.g. IR proximity switch-dimmer ELSP-XM319-IR5.
    Power supply with margin
    12 V DC supplies or 24 V DC supplies.

    Advantages

    • Load up to 10 A
    • Keeps dimming
    • 12 and 24 V
    • Small housing

    Disadvantages / limitations

    • Compatible with the ELSP-XM319 series – check other switches
    • At 12 V – only 120 W
    • Requires separate mounting and a more powerful supply

    Safety and installation notes

    • Connect with the power off.
    • Do not exceed 10 A: 120 W (12 V), 240 W (24 V).
    • Supply power – with ~20 % margin.
    • Wire cross-section – rated for 10 A.

    Quick selection guide

    12–24 V DC
    10 A
    120 W @12 V / 240 W @24 V
    PWM
    Suitable when you need to:
    • when the switch's 5 A is not enough;
    • large mirrors and long strips.
    Check before use:
    • switch series (ELSP-XM319);
    • total strip power and voltage;
    • supply power.
    Important reminder: the amplifier limit is the current – 10 A, so power depends on voltage: 120 W at 12 V and 240 W at 24 V.

    Frequently asked questions

    How many W can be connected?
    120 W at 12 V, 240 W at 24 V.
    Will dimming still work?
    Yes, the PWM signal is repeated.
    Is it suitable for switches from other manufacturers?
    Compatibility is confirmed for the ELSP-XM319 series; others must be checked.

    Power amplifier for mirror switches | 12–24 V DC | 10 A | ELSP-XM-ST001

    ELSP-XM-ST001 – PWM power amplifier for ELSP-XM319 series mirror switches: 12–24 V DC, up to 10 A (120 W at 12 V, 240 W at 24 V), keeps dimming.

    Published: 2026-11-12 · Data verified against the supplier specification: 2026-11-12

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Wireless control kit | actuator RFSA-61B and wall controller RFWB-40 | 866-916MHz | 230VAC | iNELS RF | RFSET-SW-F1
    Code: RFSET-SW-F1

    iNELS RF RFSET-SW-F1 is a wireless control kit: RFSA-61B actuator (230 V AC, 1 changeover contact 16 A AC1, 6 functions) and RFWB-40 wall controller (CR2032, about 5 years). RFIO2 communication up to 200 m, works without internet.

    Price 63.90 € VAT incl.
    ( 52.81 € VAT excl. )
    Sealing protective mastic tape | 25x1x500mm | for sealing cable mechanical damage area | S1052-1-500
    Code: S 1052-1-500

    Specialized self-fusing sealing tape designed for protecting and sealing damaged areas on cables. Made from black thermoplastic, highly flowable mastic, this tape effectively shields cable insulation damage from moisture, corrosion, and dust. Used for emergency or preventive repair of electrical, telecommunication, and signal cables, especially suitable for outdoor and damp environments.

    Price 7.87 € VAT incl.
    ( 6.50 € VAT excl. )
    Cable sheath and wire stripper 0.2–4.0 mm² | ErgoStrip KNIPEX
    Code: 169501SB

    KNIPEX high-quality, ergonomically designed wire and cable stripping tool for fast, precise, and safe work. This stripping knife is highly favored by professional electricians for its versatility, durability, and practical design. Suitable for removing insulation from both signal and power wires, as well as for installation, data, and coaxial cables.

    Perfectly suited for use on construction sites and in domestic installations, especially where wires need to be quickly and accurately prepared for connection in confined spaces. 

    Price 48.40 € VAT incl.
    ( 40.00 € VAT excl. )
    Flexible copper cable H05VV-F | 3G1.5 mm² | 300/500 V | round | white | 1 m | Lietkabelis
    Code: 92331501

    H05VV-F 3G1.5 mm² – AB Lietkabelis flexible round copper cable with class 5 conductors, PVC insulation and a white PVC sheath, 300/500 V. Sold by the metre.

    Cores: L, N, PE. Indicative current ≈ 16 A – for household appliances indoors.

    Price 1.04 € VAT incl.
    ( 0.86 € VAT excl. )
    Smart lighting controller | dimmer | 150W LED / 200W | 100-240V | Wi-Fi | RF 433MHz | SONOFF | D1
    Code: SONOFF-D1

    SONOFF D1 is a smart Wi-Fi and RF 433 MHz lighting dimmer for dimmable LED lamps up to 150 W and incandescent lamps up to 200 W. Controlled with the eWeLink app, the RM433 remote and by voice. Installed in an EU / 86-type box.

    Price 17.40 € VAT incl.
    ( 14.38 € VAT excl. )
  • Subscribtion to new arrivals

    privacy policy

    Information