Products catalog

  • Push button | 22mm | 230V | 1NO | blue | with LED illumination | with double arrow symbol | IP65

    Code: ES-RHB-B230

    Metal push button with LED illumination – a reliable and aesthetic solution for industry, automation, transport, or individual projects. The blue LED ring illumination with a clear double-arrow symbol ensures excellent visibility both in daylight and in low-light conditions.

    The robust metal housing and IP65 protection rating allow the button to be used in more demanding environments – workshops, production facilities, outdoor equipment, or vehicles. 

  • Push button | 22mm | 230V | 1NO | blue | with LED illumination | with double arrow symbol | IP65

    Metal 22 mm push button with double arrow symbol and LED illumination (ring and symbol light up, colour – blue), 1NO contact and IP65 front. Suitable for control stations, machines and panels where a clearly marked function is needed.

    Key idea:
    Non-latching button: the NO contact closes the circuit while held pressed. The symbol shows the function at a glance – e.g. fast movement or jog in a direction.
    Mounting hole
    Ø 22 mm
    Contact
    1NO
    Operation
    non-latching
    LED illumination
    blue, 230 V
    Degree of protection
    IP65
    Housing
    metal

    How it works

    The button is fitted into a Ø 22 mm hole and tightened with a nut from the rear.

    When pressed, the NO contact closes; when released, it returns to the initial position.

    The LED illumination is wired via separate terminals (230 V), so it can show the function status independently of the contact.

    What are the benefits? An illuminated symbol and a metal IP65 housing – the operator sees immediately what the button does, even in poor lighting.

    Technical specifications

    Product type Metal push button with LED illumination and symbol
    Mounting hole Ø 22 mm
    Symbol double arrow
    Contact 1NO
    Operation non-latching
    Rated voltage 230 V AC
    Max. current 3 A
    LED colour blue
    LED voltage 230 V
    Degree of protection IP65
    Housing metal
    Fixing thread with nut

    Main functions

    • 1NO contact sends a command when pressed
    • Illuminated symbol shows function and status
    • Metal IP65 housing resists impacts, dust and water jets
    • Standard 22 mm hole

    Where is it used?

    • Control stations with +/− or direction functions
    • Hoist, gate and drive control
    • Machine and vehicle control stations
    • Automation panels and PLC inputs

    Use by need

    For the installer. Standard 22 mm hole and a clear symbol – no extra labels needed next to the button.
    For machine builders. Metal buttons with symbols make it possible to build an intuitive and tidy control station.
    For maintenance. The illuminated symbol helps the operator avoid mistakes and reduces wrong presses.

    Practical use

    In a control station this button is connected to a PLC or controller input, and the LED to an output that shows the function is active. Typical purpose: fast movement or jog in a direction.
    Pros
    • Illuminated symbol
    • Metal IP65 housing
    • Standard 22 mm hole
    • 1NO non-latching
    Cons
    • LED 230 V only – not suitable for 12/24 V circuits
    • Only one 1NO contact, up to 3 A

    Safety and installation notes

    • Installation and connection must be carried out by a qualified electrician.
    • Before installation, disconnect the supply and verify that there is no voltage.
    • Do not exceed 3 A – switch larger loads via a contactor or relay.
    • Not suitable for emergency stop – use a certified emergency STOP button.
    Quick selection guide
    Ø 22 mm1NOnon-latchingLED blueIP65metal

    FAQ

    ⚡ Does the button latch?
    No, it returns to the initial position when released.
    ⚡ What is the LED voltage?
    230 V. For 12/24 V circuits choose buttons with a different voltage.
    ⚡ What current can be switched?
    Up to 3 A. Switch larger loads via a contactor or relay.
    ⚡ What hole size is needed?
    A standard Ø 22 mm hole.
    ⚡ Can the LED be wired separately from the contact?
    Yes, the LED has separate terminals.

    Push button | 22mm | 230V | 1NO | blue | with LED illumination | with double arrow symbol | IP65

    Metal 22 mm push button with double arrow symbol, blue LED 230 V, 1NO, non-latching, IP65 – a clear and robust control element for control stations and machines. Need push buttons selected for a whole control station? Send us the diagram – we will select the products and send a quote.

    Published: 2026-11-06 · Data according to the manufacturer’s marking: 2026-11-06

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Cable gland with locknut and gasket | PG7 | for cable Ø3–6.5 mm | grey | IP68 | 4772124000810
    Code: 00810

    Plastic PG7 cable gland with locknut and gasket for routing Ø3–6.5 mm round cables into distribution boards and junction boxes. Provides IP68 sealing when correctly installed.

    Price 0.20 € VAT incl.
    ( 0.17 € VAT excl. )
    Control cable | 3x0.75 YSLY-JZ (OPVC-JZ) | 300/500 V | flexible | grey
    Code: OPVC-JZ 3X0,75

    Round flexible multi-core control cable with numbered cores and a green-yellow PE core. Installed openly in dry and damp rooms; outdoors only when protected from direct sunlight.

    Price is per 1 m.

    Price 0.53 € VAT incl.
    ( 0.44 € VAT excl. )
  • Subscribtion to new arrivals

    privacy policy

    Information