Products catalog

Home/Product Catalog/Automation and Control Systems/Control components for automation and control systems/Buttons for automation control | control systems
  • New item   Push button with LED illumination | 22 mm | 1NO | yellow | metal | LED 24 V | IP40 | non-latching | Promfactor Baltic | FP PCPI y24

    Push button with LED illumination | 22 mm | 1NO | yellow | metal | LED 24 V | IP40 | non-latching | Promfactor Baltic | FP PCPI y24

    Code: FP PCPI y24
    Barcode: 4779040158441
    Inquire about this item
    Price 6.32 € VAT incl.
    ( 5.22 € VAT excl. )

    Push button with LED illumination Ø 22 mm, 1NO, yellow, LED 24 V, IP40, Promfactor Baltic FP PCPI y24. For control circuits: AC-15 6 A / DC-13 0.6 A, Ui 660 V.

  • Product description

    Push button with LED illumination | 22 mm | 1NO | yellow | metal | LED 24 V | IP40 | non-latching | Promfactor Baltic | FP PCPI y24

    FP PCPI y24 is a yellow illuminated metal push button switch from the Promfactor Baltic FP series, with 1NO contact and 24 V LED illumination. It is mounted in a Ø 22 mm hole in a panel door, control desk or push button enclosure; front protection degree IP40.

    Key idea:
    According to EN 60204-1, yellow means intervention in an abnormal condition, e.g. acknowledging a fault or interrupting a cycle. The NO contact closes the circuit only when pressed, so the button sends a start or control command.
    Contact
    1NO
    Button type
    illuminated, non-latching
    Mounting
    Ø 22 mm hole
    Illumination
    LED 24 V
    Degree of protection
    IP40 front
    Colour
    yellow

    How it works

    The button is inserted into a Ø 22 mm hole and tightened from the rear with a nut. The contact block is connected with screw terminals, tightening torque 0.8 Nm.

    At rest the NO contact is open; when pressed it closes the circuit, and when released the button returns to its initial position (non-latching). For starting it is connected in parallel with the contactor auxiliary contact 13–14 so that the motor keeps running after the button is released.

    The LED illumination is powered at 24 V, so the control circuit must have the same voltage. A different voltage will burn out the LED or it will not light.

    Why choose FP PCPI y24? Button and indicator in one – the operator sees the status and fewer holes are needed in the door.

    Technical specifications

    Product type Push button with LED illumination, non-latching
    Manufacturer / code Promfactor Baltic / FP PCPI y24
    EAN 4779040158441
    Series FP (22 mm control push buttons)
    Housing metal
    Colour yellow
    Contact 1NO
    Illumination LED 24 V
    Standard IEC/EN 60947-5
    Utilization category AC-15 / DC-13
    Rated voltage Ue up to 380 V AC / 220 V DC
    Rated current 6 A (AC) / 0.6 A (DC)
    Insulation voltage Ui 660 V
    Frequency 50/60 Hz
    Mechanical life 1,000,000 cycles
    Degree of protection IP40 on the operating side
    Mounting hole Ø 22 mm
    Terminal tightening torque 0.8 Nm
    Operating temperature -25…+45 °C
    Storage temperature -25…+55 °C
    Warranty 24 months from start of use (max. 30 months from sale)

    Main functions

    • 1NO contact – closes the control circuit when pressed
    • Spring return – returns to the initial position when released
    • LED indication – shows the status, 24 V
    • Ø 22 mm mounting – fits standard panel holes and push button enclosures
    • Screw terminals – reliable wire connection, 0.8 Nm

    Where is it used?

    • Control panels for pumps, fans and compressors
    • Motor START–STOP control with a contactor
    • Commands in automation panels and PLC inputs
    • Push button enclosures at machines and control desks

    Use by need

    For the installing electrician. A standard 22 mm hole, screw terminals and clear contact marking allow quick installation and replacement of an old button.
    For automation panel builders. Buttons, lamps and START–STOP units from one series allow a panel with a uniform look.
    For equipment maintenance. A frequently replaced component worth keeping in stock by colour and contact.

    Practical use

    In a ventilation panel with a 24 V control circuit, the illuminated button both controls the unit and shows its status, so no separate indicator lamp is needed.
    Pros
    • Button and indicator in one
    • Status visible from a distance
    • Standard Ø 22 mm hole
    • Ui 660 V, AC-15 / DC-13
    Cons
    • IP40 – not suitable outdoors or in washdown areas without an extra cover
    • The LED voltage must exactly match the control voltage
    • Not intended for switching motor current directly

    Safety and installation notes

    • Installation and connection must be performed by a qualified electrician after disconnecting the voltage and verifying that there is none.
    • Protect the control circuit with a separate circuit breaker or fuse according to the wire cross-section.
    • Use an NC contact for the STOP function and a spring-return NO with contactor self-holding for START.
    • Metal doors with equipment must be connected to PE.
    Quick selection guide
    Ø 22 mm1NOyellowLED 24 VIP40non-latchingAC-15 / DC-13

    FAQ

    ⚡ Does FP PCPI y24 have illumination?
    Yes, 24 V LED illumination. It is connected to a control circuit of the same voltage.
    ⚡ What contact does it have?
    One 1NO contact: the circuit closes when pressed.
    ⚡ What hole size is needed?
    A standard Ø 22 mm hole in a panel door, control desk or push button enclosure.
    ⚡ Does the button latch?
    No, the button is spring return – it returns to its initial position when released.
    ⚡ What current can it switch?
    According to the manufacturer, the rated current is 6 A (AC-15) and 0.6 A (DC-13). The button is intended for control circuits; the motor is connected via a contactor.

    Push button with LED illumination | 22 mm | 1NO | yellow | metal | LED 24 V | IP40 | non-latching | Promfactor Baltic | FP PCPI y24

    FP PCPI y24 is a reliable Promfactor Baltic FP series 1NO push button for a Ø 22 mm hole with 24 V LED. Suitable for panels, control desks and push button enclosures in dry rooms. Need help selecting buttons for a whole panel? Send us the diagram – we will select the components and send a quote.

    Published: 2026-11-05 · Data verified against the manufacturer datasheet: 2026-11-05

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.

  • Alternative products

    Cable gland with locknut and gasket | PG7 | for cable Ø3–6.5 mm | grey | IP68 | 4772124000810 New item  
    Cable gland with locknut and gasket | PG7 | for cable Ø3–6.5 mm | grey | IP68 | 4772124000810
    Code: 00810

    Plastic PG7 cable gland with locknut and gasket for routing Ø3–6.5 mm round cables into distribution boards and junction boxes. Provides IP68 sealing when correctly installed.

    Price 0.20 € VAT incl.
    ( 0.17 € VAT excl. )
    Add to cart 
    Control cable | 3x0.75 YSLY-JZ (OPVC-JZ) | 300/500 V | flexible | grey New item  
    Control cable | 3x0.75 YSLY-JZ (OPVC-JZ) | 300/500 V | flexible | grey
    Code: OPVC-JZ 3X0,75

    Round flexible multi-core control cable with numbered cores and a green-yellow PE core. Installed openly in dry and damp rooms; outdoors only when protected from direct sunlight.

    Price is per 1 m.

    Price 0.53 € VAT incl.
    ( 0.44 € VAT excl. )
    Add to cart 
  • privacy policy

    Information