Products catalog

Home/Product Catalog/Smart Automated Products | Control | Transmission | Detection/SONOFF Smart | Automated Control/SONOFF smart home control panels
  • New item   Smart home control panel | touch screen | 2-channel | 100-240V | 86x86x42mm | with temperature sensor | white | Wi-Fi | SONOFF | NSPanel-EUW
    New item   Smart home control panel | touch screen | 2-channel | 100-240V | 86x86x42mm | with temperature sensor | white | Wi-Fi | SONOFF | NSPanel-EUW 1
    New item   Smart home control panel | touch screen | 2-channel | 100-240V | 86x86x42mm | with temperature sensor | white | Wi-Fi | SONOFF | NSPanel-EUW 2

    Smart home control panel | touch screen | 2-channel | 100-240V | 86x86x42mm | with temperature sensor | white | Wi-Fi | SONOFF | NSPanel-EUW

    Code: NS-Panel-EUW
    Barcode: 6920075777703
    Inquire about this item
    Price 48.40 € VAT incl.
    ( 40.00 € VAT excl. )

    SONOFF NSPanel (EU) is a wall-mounted smart home panel with a touch screen and a 2-channel switch (2 A per channel). It shows the weather and room temperature, controls other eWeLink devices and scenes and has a thermostat function. Mounted in an 86-type box, N wire required.

  • Product description

    Smart home control panel | touch screen | 2-channel | 100-240V | 86x86x42mm | with temperature sensor | white | Wi-Fi | SONOFF | NSPanel-EUW

    SONOFF NSPanel (EU) is a wall-mounted smart home panel with a touch screen and two physical buttons. It replaces a standard switch: it controls two wired lighting groups, shows the weather and room temperature and lets you control other eWeLink devices and scenes from the screen.

    Key idea:
    One device instead of a switch, thermostat and scene controller. NSPanel becomes the home control point by the door or in the living room: two light groups by buttons, everything else on the screen.
    Channels
    2 (2 A each, 4 A total)
    Screen
    touch, weather and temperature
    Connectivity
    Wi-Fi 2.4 GHz
    Dimensions
    86 × 86 × 42 mm

    How it works

    The panel is mounted in an 86-type wall box instead of a switch. Phase (L), neutral (N) and two lighting groups are connected, controlled by two physical buttons.

    Connected to 2.4 GHz Wi-Fi, the panel is controlled remotely in the eWeLink app. The screen shows the local weather and the room temperature from the built-in sensor, and touch cards control other eWeLink devices and scenes.

    The thermostat function can switch another eWeLink device, e.g. a heater, on or off based on the measured temperature. The result: one wall-mounted control centre.

    Why choose NSPanel?
    Physical buttons keep familiar operation, while the screen gives quick access to scenes and other devices. The thermostat function allows heating control without a separate thermostat.

    Technical specifications

    Product type Smart wall control panel with 2-channel switch (Wi-Fi)
    Manufacturer / model SONOFF NSPanel-EUW
    Power supply 100–240 V AC (L and N required)
    Number of channels 2
    Max. load 2 A per channel, 4 A total
    Physical buttons 2
    Screen LED touch screen
    Sensor built-in temperature sensor
    Wireless Wi-Fi 802.11 b/g/n 2.4 GHz (no 433 MHz RF or Zigbee)
    Energy metering no
    Two-way control not supported
    App eWeLink (Android, iOS)
    Voice control Amazon Alexa, Google Assistant
    Timers up to 8 timers without internet
    Installation 86-type wall box
    Dimensions 86 × 86 × 42 mm

    Main functions

    • Two lighting channels – two groups are controlled by physical buttons and the app.
    • Touch screen – weather, room temperature and quick access to scenes.
    • Control of other devices – eWeLink devices and scenes – straight from the wall.
    • Thermostat function – controls another eWeLink device based on temperature.
    • Schedules and timers – up to 8 timers work even without internet.
    • Voice control – Amazon Alexa and Google Assistant.

    Where is it used?

    • Living rooms and hallways – central control point
    • Bedrooms – light and heating in one place
    • Apartments with a SONOFF eWeLink system
    • Scenes for offices and meeting rooms
    • Guest houses and apartments
    • Renovation in place of a standard two-gang switch

    Use by need

    For homeowners.
    Instead of a switch – a screen with weather, temperature and control of all smart devices.
    For electricians.
    Mounted in a standard 86-type box with L and N, like an ordinary switch.
    For eWeLink system users.
    Scenes and other devices are accessible without a phone.

    Practical use

    If you want to switch off all lights and sockets with one touch when leaving the hallway, install NSPanel in place of a two-gang switch, connect two lighting groups and create a “Leaving” scene on the screen.

    Pros

    • Two channels and a touch screen
    • Built-in temperature sensor
    • Control of other eWeLink devices and scenes
    • Thermostat function
    • Timers work without internet

    Cons / limitations

    • Neutral (N) wire required
    • Low load – 2 A per channel, 4 A total
    • Does not support two-way (staircase) control
    • No Zigbee or 433 MHz RF

    Safety and installation notes

    • Before installation switch off the circuit breaker and verify that no voltage is present
    • Installation must be carried out by a qualified electrician
    • Do not exceed 2 A per channel and 4 A in total
    • Use relays or contactors for larger loads
    • Check that the box is an 86-type box and deep enough

    Quick selection guide

    2 channels
    2 A / channel
    Touch screen
    Temperature sensor
    Wi-Fi 2.4 GHz
    86-type box
    Suitable when you need:
    • a central smart home control point on the wall
    • control of two lighting groups with scenes
    • a simple thermostat with an eWeLink heater
    Check before use:
    • whether there is an N wire in the box
    • whether the box is an 86-type box
    • the load power (up to 2 A per channel)
    • that two-way control is not needed
    Important reminder: NSPanel is not a protective device and does not replace a circuit breaker, a residual current device or the safety thermostat of heating equipment.

    FAQ

    Is a neutral wire required?
    Yes, the panel is powered from L and N.
    What load can be connected?
    Up to 2 A per channel and 4 A in total.
    Can other devices be controlled?
    Yes, eWeLink devices and scenes from the screen.
    Is staircase (two-way) control supported?
    No, this model does not support it.
    Does it work without internet?
    The physical buttons and up to 8 timers work without internet.
    Does it have Zigbee?
    No, this model works via Wi-Fi only.

    Smart home control panel | touch screen | 2-channel | 100-240V | 86x86x42mm | with temperature sensor | white | Wi-Fi | SONOFF | NSPanel-EUW

    SONOFF NSPanel EU is a wall-mounted smart home panel with a touch screen, a 2-channel switch, a temperature sensor and a thermostat function for the eWeLink system.

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.

  • Alternative products

    Modular smart circuit breaker | 4P | 63A | 400V | 6kA | DIN | MCB | Wi-Fi | TUYA | Tuya03 New item  
    Modular smart circuit breaker | 4P | 63A | 400V | 6kA | DIN | MCB | Wi-Fi | TUYA | Tuya03
    Code: Tuya03

    TUYA Tuya03 is a modular smart circuit breaker 4P 63 A, C curve, 6 kA, 400 V, for DIN rail. It protects a three-phase circuit against overload and short circuit and lets you switch it on or off via the Tuya / Smart Life app.

    Price 96.00 € VAT incl.
    ( 79.34 € VAT excl. )
    Add to cart 
    Smart soil moisture sensor | for THR316 and THR320 controllers | 0-100%RH | with 50cm cable | black | IP55 | SONOFF | MS01 Smart soil moisture sensor | for THR316 and THR320 controllers | 0-100%RH | with 50cm cable | black | IP55 | SONOFF | MS01 New item  
    Smart soil moisture sensor | for THR316 and THR320 controllers | 0-100%RH | with 50cm cable | black | IP55 | SONOFF | MS01
    Code: MS01

    SONOFF MS01 is a capacitive soil moisture sensor (0–100 %, IP55) with an RJ9 connector and a 50 cm cable. Designed for SONOFF THR316 and THR320 controllers – it enables automatic watering based on soil moisture. The cable can be extended to 10 m.

    Price 17.30 € VAT incl.
    ( 14.30 € VAT excl. )
    Add to cart 

  • Subscribtion to new arrivals

    privacy policy

    Information