Products catalog

  • Temporary construction site distribution board | 40 A | with circuit breakers and residual current device | 1×CEE 400 V + 2×CEE 230 V sockets | metal | surface-mounted | 410×300×180 mm | IP44 | SKLS40

    Code: SKLS40

    A 40 A metal surface-mounted construction site distribution board with installed circuit breakers, a residual current device and three industrial CEE sockets – one 3-phase 400 V (red) and two single-phase 230 V (blue). The enclosure has a door with a lock, IP44 protection.

  • Temporary construction site distribution board | 40 A | with circuit breakers and residual current device | 1×CEE 400 V + 2×CEE 230 V sockets | metal | surface-mounted | 410×300×180 mm | IP44 | SKLS40

    A 40 A metal surface-mounted construction site distribution board with installed circuit breakers, a residual current device and three industrial CEE sockets – one 3-phase 400 V (red) and two single-phase 230 V (blue). The enclosure has a door with a lock, IP44 protection.

    Key idea:
    This is a ready temporary power point that only needs to be fixed to a wall and connected to the supply. The metal enclosure with a lockable door protects the devices against unauthorised persons and mechanical damage on site.
    Rated current
    40 A
    Sockets
    1×CEE 400 V + 2×CEE 230 V
    Protection
    circuit breakers + RCD
    Enclosure
    metal, IP44

    How it works

    The board is surface-mounted on a wall or structure and supplied from a 3-phase 230/400 V network. The supply cable is connected to the board inlet.

    The installed circuit breakers protect socket groups against overload and short circuit, while the residual current device disconnects the supply in the event of earth leakage.

    The result is a lockable metal distribution point supplying 3-phase and single-phase site equipment.

    Why choose SKLS40?
    Overcurrent and earth leakage protection are combined in one enclosure, so there is no need to buy and install separate devices. The metal enclosure with a lock suits locations where unauthorised persons may access the board.

    Technical specifications

    Product typeTemporary construction site supply / distribution board with sockets and protection
    CodeSKLS40
    Rated current40 A
    Rated voltage230/400 V
    Frequency50 Hz
    3-phase sockets1× industrial CEE 400 V (red)
    Single-phase sockets2× industrial CEE 230 V (blue)
    Protective devicescircuit breakers (overload, short circuit), residual current device
    Enclosuremetal, with door and lock
    Mountingsurface-mounted
    Dimensions (H×W×D)410 × 300 × 180 mm
    Degree of protectionIP44

    Main functions

    • Circuit breakers – protect socket groups and cables against overload and short circuit.
    • Residual current device – disconnects the supply in case of earth leakage and reduces the risk of electric shock.
    • 3-phase CEE 400 V socket – for mixers, cutting machines and other 3-phase equipment.
    • Two CEE 230 V sockets – for single-phase tools and lighting with industrial plugs.
    • Lockable metal enclosure – protection against unauthorised persons and mechanical impact.
    • IP44 – suitable for outdoor use on construction sites.

    Where is it used?

    • Residential construction sites
    • Renovation projects
    • Temporary lighting and tool supply
    • Farms and seasonal work
    • Temporary workshops
    • Technical zones at events

    Use by need

    For the contractor.
    A lockable board that can be left unattended on site.
    For the electrician.
    A ready board with protection – only the supply needs to be connected.
    For the farm owner.
    Safe temporary 3-phase and single-phase power for seasonal work.

    Practical application

    If a house under renovation needs power for a concrete mixer and several single-phase tools and the site is left overnight, this board can be fixed to the wall, the equipment connected via CEE plugs and the door locked.

    Pros

    • Circuit breakers and RCD already installed
    • Metal enclosure with door and lock
    • 3-phase and single-phase CEE sockets
    • IP44 for outdoor conditions
    • Compact surface mounting

    Cons / limitations

    • The single-phase sockets are CEE 230 V, so domestic Schuko plugs need an adapter
    • Only one 3-phase socket
    • Total load limited to 40 A
    • The metal enclosure must be reliably earthed

    Safety and installation notes

    • Connection must be made by a qualified electrician; earth the enclosure.
    • Select the supply cable cross-section and protection for a 40 A load.
    • Test the RCD with the TEST button before work.
    • Keep the door closed and locked when the board is left unattended.
    • Do not connect equipment with damaged cables or plugs.

    Quick selection guide

    230/400 V
    40 A
    1×CEE 400 V
    2×CEE 230 V
    MCB + RCD
    metal
    IP44
    surface-mounted
    Suitable when you need:
    • A lockable temporary site supply
    • Ready protection without assembling a board
    • 3-phase and single-phase power in one place
    Check before use:
    • That the equipment plugs are CEE type
    • That the total current does not exceed 40 A
    • That the supply line and earthing match the board rated current
    Important reminder: The board is not an energy metering board – if a meter is required on site, choose a metering board.

    FAQ

    Does the board have an RCD?
    Yes, it has installed circuit breakers and a residual current device.
    How many 3-phase sockets are there?
    One industrial CEE 400 V socket.
    Can Schuko plugs be connected?
    Not directly – the single-phase sockets are CEE 230 V, an adapter is needed.
    Is the enclosure lockable?
    Yes, the metal enclosure has a door with a lock.
    What is the rated current?
    40 A.
    Is it suitable outdoors?
    Yes, the board has IP44 protection.

    Temporary construction site distribution board | 40 A | with circuit breakers and residual current device | 1×CEE 400 V + 2×CEE 230 V sockets | metal | surface-mounted | 410×300×180 mm | IP44 | SKLS40

    SKLS40 – a 40 A metal temporary construction site board with circuit breakers, an RCD and CEE 400 V and 230 V sockets, a lockable enclosure and IP44 protection.

    Published: 2026-11-15 · Data verified against the supplier specification: 2026-11-15

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Three-phase electricity meter | 5(10) A via current transformers | 3×230/400 V | CT connection | 1 tariff | active energy | GAMA 300 | ELGAMA-ELEKTRONIKA G3A.147-230.C110
    Code: G3A.147-230.C110

    A Lithuanian-made three-phase active energy meter connected via x/5 A current transformers – for metering large supplies and feeders. Class B to EN 50470-3, 1 tariff, internal clock, LCD. Panel housing with three-point mounting.

    Price 152.15 € VAT incl.
    ( 125.74 € VAT excl. )
    CYKY-L 5G4 | 5×4 mm² | Copper power cable | 450/750 V | black | 1 m | Lietkabelis
    Code: 91950413

    CYKY-L 5G4 (5×4 mm²) – 450/750 V copper power cable for three-phase 400 V circuits with neutral. Solid cores, PVC insulation and sheath, suitable indoors, outdoors and in the ground. AB Lietkabelis, price per 1 m.

    Price 3.45 € VAT incl.
    ( 2.85 € VAT excl. )
  • privacy policy

    Information