Products catalog

  • Bimetallic ring cable lug Al/Cu | 240mm² | M12 | crimp | Sofamel TDC/S-240/12 | 111180

    Code: 111180
    Barcode: 8435157309515

    Tin-plated aluminium ring lug for 240 mm² Al conductor, M12 stud. For connecting aluminium cable to copper busbars and terminals without galvanic corrosion. Sofamel TDC/S, UNE 211024-2.

  • Bimetallic ring lug 240 mm² / M12 for aluminium cables

    Crimp ring cable lug for connecting a 240 mm² aluminium conductor to an M12 stud – copper busbar, switch-disconnector, circuit breaker or transformer terminal. The entire lug is tin-plated, so aluminium does not touch copper directly and no galvanic corrosion occurs in the joint.

    Technical data

    ManufacturerSofamel (Spain)
    Series / modelTDC/S-240/12
    Manufacturer code111180
    EAN8435157309515
    Conductor240 mm², aluminium (Al), round RM/SM or sector SE
    StudM12 (hole Ø12.9 mm)
    Materialaluminium Al 1050 (≥ 99.5 %), stamped from bar
    Platingelectrolytic tin ~15 µm on the entire surface
    Barrelinner Ø19.5 mm, outer Ø32.0 mm; filled with neutral grease
    StandardUNE 211024-2, AENOR certified
    Crimpinghexagonal die for barrel outer Ø32.0 mm

    Advantages

    • Connects aluminium cable safely to copper busbars and terminals – the tin layer separates Al and Cu.
    • Grease is already inside the barrel – no extra contact paste needed.
    • The tin-plated palm does not oxidise and keeps contact resistance low.
    • Designed for 0.4 kV underground network joints to UNE 211024-2.

    Applications

    0.4 kV service entries with aluminium cables (AXMK, AXPK, NAYY etc.), metering and distribution cabinets, LV side of transformer substations, AC lines of solar power plants with Al cable.

    Installation

    1. Strip the insulation along the full barrel length and brush the oxide off the conductor.
    2. Insert the conductor fully – do not wipe out the grease.
    3. Crimp with a hexagonal die for outer Ø32.0 mm using a hydraulic crimping tool.
    4. Insulate the crimp with heat-shrink tubing.
    5. Tighten the bolt to the torque specified by the equipment manufacturer and re-check after the first hours under load.

    ⚠ Not suitable for copper cable – use copper ring lugs for copper conductors.

    Keywords

    bimetallic lug 240 mm2, Al/Cu cable lug M12, aluminium cable lug, Sofamel TDC/S, crimp aluminium lug

    EN: Tin-plated aluminium ring cable lug for 240 mm² Al conductors, M12 stud, for connecting aluminium cables to copper terminals.

    LT: Alavuotas aliumininis kilpinis antgalis 240 mm² Al gyslai, M12, aliuminio kabeliams jungti prie varinių gnybtų.

    Published: 2026-11-12 · Data verified against the manufacturer datasheet: 2026-11-12

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Aluminium power cable | 4x120mm² | AXMK | Class 2 | 1m | Black
    Code: AXMK 4x120

    AXMK 4×120 mm² aluminium power cable designed for fixed 0.6/1 kV electrical power transmission and distribution lines. The cable features aluminium conductors, XLPE insulation, and a black UV-resistant PVC outer sheath. Suitable for installation outdoors, underground, in dry, damp and wet areas, cable ducts, conduits, and concrete. Maximum operating temperature – 90 °C. 

    Price 15.13 € VAT incl.
    ( 12.50 € VAT excl. )
    Aluminium power cable | 4x120mm² | AXMK | Class 2 | 1000m | Black
    Code: SKU#165996553256573221

    AXMK 4×120 mm² aluminium power cable designed for fixed 0.6/1 kV electrical power transmission and distribution lines. The cable features aluminium conductors, XLPE insulation, and a black UV-resistant PVC outer sheath. Suitable for installation outdoors, underground, in dry, damp and wet areas, cable ducts, conduits, and concrete. Maximum operating temperature – 90 °C.  

    Sold by the drum, i.e. the minimum order quantity is 1000 metres.

    Delivery time: up to 6 weeks. 

    Price 11.04 € VAT incl.
    ( 9.12 € VAT excl. )
    Aluminium power cable | 4x150mm² | AXMK | Class 2 | 500m | black
    Code: SKU#165996595240116261

    Aluminium power cable AXMK 4×150 mm², designed for fixed 0.6/1 kV electrical power transmission and distribution lines. The cable features aluminium conductors, XLPE insulation, and a black PVC outer sheath resistant to UV radiation. Suitable for installation outdoors, underground, in dry, damp and wet areas, cable ducts, pipes, and concrete. Maximum operating temperature – 90 °C.  

    Sold by the drum, i.e. the minimum order quantity is 500 metres.

    Delivery time: up to 6 weeks. 

    Price 14.52 € VAT incl.
    ( 12.00 € VAT excl. )
  • Subscribtion to new arrivals

    privacy policy

    Information