
Bimetallic ring cable lug Al/Cu | 300mm² | M12 | crimp | Sofamel TDC/S-300/12 | 111185
Code: 111185Price 16.52 € VAT incl.( 13.65 € VAT excl. )Tin-plated aluminium ring lug for 300 mm² Al conductor, M12 stud. For connecting aluminium cable to copper busbars and terminals without galvanic corrosion. Sofamel TDC/S, UNE 211024-2.
-
Bimetallic ring lug 300 mm² / M12 for aluminium cables
Crimp ring cable lug for connecting a 300 mm² aluminium conductor to an M12 stud – copper busbar, switch-disconnector, circuit breaker or transformer terminal. The entire lug is tin-plated, so aluminium does not touch copper directly and no galvanic corrosion occurs in the joint.
Technical data
Manufacturer Sofamel (Spain) Series / model TDC/S-300/12 Manufacturer code 111185 Conductor 300 mm², aluminium (Al), round RM/SM or sector SE Stud M12 (hole Ø12.9 mm) Material aluminium Al 1050 (≥ 99.5 %), stamped from bar Plating electrolytic tin ~15 µm on the entire surface Barrel inner Ø23.3 mm, outer Ø40.0 mm; filled with neutral grease Standard UNE 211024-2 Crimping hexagonal die for barrel outer Ø40.0 mm Advantages
- Connects aluminium cable safely to copper busbars and terminals – the tin layer separates Al and Cu.
- Grease is already inside the barrel – no extra contact paste needed.
- The tin-plated palm does not oxidise and keeps contact resistance low.
- Designed for 0.4 kV underground network joints to UNE 211024-2.
Applications
0.4 kV service entries with aluminium cables (AXMK, AXPK, NAYY etc.), metering and distribution cabinets, LV side of transformer substations, AC lines of solar power plants with Al cable.
Installation
- Strip the insulation along the full barrel length and brush the oxide off the conductor.
- Insert the conductor fully – do not wipe out the grease.
- Crimp with a hexagonal die for outer Ø40.0 mm using a hydraulic crimping tool.
- Insulate the crimp with heat-shrink tubing.
- Tighten the bolt to the torque specified by the equipment manufacturer and re-check after the first hours under load.
⚠ Not suitable for copper cable – use copper ring lugs for copper conductors.
Keywords
bimetallic lug 300 mm2, Al/Cu cable lug M12, aluminium cable lug, Sofamel TDC/S, crimp aluminium lug
EN: Tin-plated aluminium ring cable lug for 300 mm² Al conductors, M12 stud, for connecting aluminium cables to copper terminals.
LT: Alavuotas aliumininis kilpinis antgalis 300 mm² Al gyslai, M12, aliuminio kabeliams jungti prie varinių gnybtų.
Published: 2026-11-12 · Data verified against the manufacturer datasheet: 2026-11-12
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Aluminium power cable | 4x150mm² | AXMK | Class 2 | 500m | blackCode: SKU#165996595240116261Aluminium power cable AXMK 4×150 mm², designed for fixed 0.6/1 kV electrical power transmission and distribution lines. The cable features aluminium conductors, XLPE insulation, and a black PVC outer sheath resistant to UV radiation. Suitable for installation outdoors, underground, in dry, damp and wet areas, cable ducts, pipes, and concrete. Maximum operating temperature – 90 °C.
Sold by the drum, i.e. the minimum order quantity is 500 metres.
Delivery time: up to 6 weeks.
Price 14.52 € VAT incl.( 12.00 € VAT excl. )Aluminium power cable | 4x120mm² | AXMK | Class 2 | 1000m | BlackCode: SKU#165996553256573221AXMK 4×120 mm² aluminium power cable designed for fixed 0.6/1 kV electrical power transmission and distribution lines. The cable features aluminium conductors, XLPE insulation, and a black UV-resistant PVC outer sheath. Suitable for installation outdoors, underground, in dry, damp and wet areas, cable ducts, conduits, and concrete. Maximum operating temperature – 90 °C.
Sold by the drum, i.e. the minimum order quantity is 1000 metres.
Delivery time: up to 6 weeks.
Price 11.04 € VAT incl.( 9.12 € VAT excl. )Aluminium power cable | 4x120mm² | AXMK | Class 2 | 1m | BlackCode: AXMK 4x120AXMK 4×120 mm² aluminium power cable designed for fixed 0.6/1 kV electrical power transmission and distribution lines. The cable features aluminium conductors, XLPE insulation, and a black UV-resistant PVC outer sheath. Suitable for installation outdoors, underground, in dry, damp and wet areas, cable ducts, conduits, and concrete. Maximum operating temperature – 90 °C.
Price 15.13 € VAT incl.( 12.50 € VAT excl. )












