Rotary deflector D160 with flashing | for bitumen roofing | kit with insulated outlet | ABS | grey
Code: S160GRAPrice 156.60 € VAT incl.( 129.42 € VAT excl. )Kit for bitumen roofing: roof flashing 250×160 mm, insulated ventilation outlet 500×160 mm and rotary deflector D160 with ball bearings. Colour – grey.
-
Rotary deflector D160 kit for bitumen roofing – grey
A complete kit for a ventilation outlet through the roof: roof flashing (base) for bitumen roofing, insulated ventilation outlet and rotary deflector. All parts needed for installation – in one box.
Key point
The insulated outlet reduces heat loss and the risk of condensation; the deflector rotates on ball bearings. According to the manufacturer, extraction reaches up to 71 m³/h at a wind speed of 3 m/s. ABS plastic does not rust and is unaffected by moisture, so it is also suitable for aggressive environments – livestock farms, damp rooms, coastal areas.
Connection diameterD160 / 125 mmRoofingBitumenBearingsballColourGrey⚠ For ventilation only
The deflector is intended for ventilation ducts only – to extract humid and warm air. Do not install it on flues of stoves, fireplaces, sauna heaters or boilers: hot flue gases and acidic condensate will damage it, and there is a risk of fire and carbon monoxide (CO) poisoning.
How it works
- The roof flashing is fixed to the roofing and sealed.
- The insulated ventilation outlet is inserted through it, with a Ø125 mm duct connected from below.
- On top – a D160 rotary deflector that extracts air without electricity.
Estimated air extraction
According to the manufacturer – up to 71 m³/h at 3 m/s wind.
Technical specifications
Product type Roof ventilation kit with rotary deflector Roofing Bitumen Kit contents Roof flashing 250×160 mm, insulated outlet 500×160 mm, deflector 160 mm Outer deflector diameter 160 mm Inner connection diameter 125 mm Extraction up to 71 m³/h at 3 m/s wind (manufacturer data) Material ABS plastic, UV-resistant Rotating assembly Ball bearings Weight ~3 kg Colour Grey Where it is used
- Ventilation of detached houses and homesteads
- Bathrooms, kitchens, laundry rooms, boiler rooms
- Garages and outbuildings
- New construction and renovation
Installation diagram: common mistakes and the correct way
☝ Click the diagram to open an enlarged version.⚠ The diagram is for guidance only and may contain inaccuracies. Before installation, check it against the manufacturer's instructions and the roofing requirements.
Responsibility for installation lies with the qualified specialist performing it. UAB „Elektrotechnikos sprendimai“ is not liable for installation or possible errors.☝ Elsprendimai.eu recommends:- If you need only the deflector – rotary deflector D160.
- For a Ø100 duct – rubber adapter D100–125.
✓ Pros
- Everything in the kit – no need to match parts
- Insulated outlet – less condensate
- Ball bearings
- ABS does not rust – suitable for aggressive environments
- Manufacturer-stated capacity – up to 71 m³/h
→ Limitations
- Intended only for bitumen roofing – for other roofing choose a different kit
- Capacity depends on the wind
- Not suitable for flues
⚠ Installation and maintenance
- Check that the kit matches your roofing.
- Seal the roof flashing according to the roofing manufacturer's instructions.
- The outlet must be vertical – level it before final tightening.
- Roof work is work at height.
FAQ
What is included in the kit?
Roof flashing, insulated ventilation outlet and rotary deflector D160.
What duct diameter can be connected?
The inner connection diameter is 125 mm; for a Ø100 duct use an adapter.
How much air does it extract?
According to the manufacturer – up to 71 m³/h at 3 m/s wind.
Is it suitable for aggressive environments?
Yes – ABS plastic does not rust.
In short
Rotary deflector D160 kit for bitumen roofing (grey) – a complete ventilation outlet through the roof in one box, with an insulated outlet and ball bearings. Unsure about the size or roofing? Send us the duct diameter and roof type – we will help you choose.
Phone: +370 620 72733
E-mail: info@elsprendimai.euIllustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.ManufacturerPlastic deflector - made from high-quality ABS plastic and has a longer service life. Resistant to oxidation, moisture, sunlight, and harsh mechanical damage.
Operates easily and quietly.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Supply air ventilation damper in wall | with G3 filter | ASA plastic outdoor grille | D125 | 0,5m | white | 12,5TOVCode: 09452Wall-mounted supply air vent D125 with a 500 mm insulated duct, G3 filter and adjustable diffuser. Outdoor side – ASA plastic outdoor grille. Intended for controlled air inflow in rooms with forced exhaust.
Price 33.58 € VAT incl.( 27.75 € VAT excl. )Inspection hatch door | 200x400x55mm | steel | RDL2040CSCode: 21360High-quality inspection doors designed for convenient and aesthetic access to engineering systems – water meters, valves, electrical or heating equipment. The sturdy steel body, resistant to corrosion, combined with a moisture-resistant gypsum board, allows for easy integration of the hatch into various types of walls and partitions. A modern adjustable tilt hinge ensures easy opening and closing of the doors with just a touch.
These doors can be finished with a variety of materials – tiles, stone, mirrors, or other decorative coatings – seamlessly blending into the overall interior design.
Price 41.12 € VAT incl.( 33.98 € VAT excl. )Fan with backdraft damper | D100 | 230V | with controller | 155x155x101mm | plastic | whiteCode: 16191A universal wall-mounted fan with an integrated backdraft damper and 6-mode controller designed for reliable, quiet, and efficient air extraction from bathrooms, showers, kitchens, and other household areas. The fan is built to deliver high performance (90 m³/h) while remaining ultra-quiet (only 25 dB(A)) and consuming very little electricity (just 8.4 W).
A built-in blue LED indicator on the front panel shows the fan’s operation status, and the axial fan with a ball bearing allows for both horizontal and vertical installation – perfectly adaptable to various installation conditions. Easy installation, reliable construction, and modern control make the device suitable for both professional installers and home users without any hassle.
Price 32.67 € VAT incl.( 27.00 € VAT excl. )Flexible aluminum air duct | for ventilation | ventilation systems | D160mm | 3,15m | silver | LAO160UCode: 18721Flexible aluminum air duct - a reliable solution for various ventilation, air circulation and air extraction systems. Thanks to the 80 micron thick aluminum foil, the duct is durable, resistant to high temperature and maintains its shape even under demanding operating conditions.
The lightweight, flexible and easy-to-install duct is suitable for connecting fans, heat recovery systems, air extraction ducts, kitchen hoods and other ventilation components.
Price 8.62 € VAT incl.( 7.12 € VAT excl. )Inspection hatch-door with push-to-open mechanism | 400x500x15mm | aluminum profile | RDL4050BCode: 12120Inspection doors-hatch are designed to conveniently and aesthetically conceal access to utility systems such as water meters, valves, electrical installations, or ventilation equipment. Made from durable aluminum profile and filled with moisture-resistant plasterboard, these doors are not only long-lasting but also adaptable to any interior – they can be painted or decorated along with the wall. The doors open and close with a push mechanism, so no additional handles or locks are needed for installation. Perfect for mounting in plasterboard walls or partitions where frequent access to hidden components is required.
Price 69.41 € VAT incl.( 57.36 € VAT excl. )Decorative steel radiator grille | for 3-section cast iron radiator | 290×610×140 mm | white | DRG3Code: 36390Decorative steel grille for covering a 3-section cast iron radiator. Dimensions 290×610×140 mm (W×H×D), colour white, polymer coating.
The grille hides an old radiator and reduces the risk of direct contact with hot sections – important in children's rooms, kindergartens and schools. Before ordering, measure the radiator width including fittings, its height and its projection from the wall.
For a longer radiator, grilles can be combined side by side – sections add up, e.g. 10 sections = DRG5 + DRG5.
Fixings are not included. Side panels in the same colour (610×140 mm) are sold separately: side panel.
Price 31.46 € VAT incl.( 26.00 € VAT excl. )

























