
Mobile power distribution unit | 6×CEE 16 A 3P 230 V | inlet CEE 32 A 5P | 6×C16 | voltmeter | sealed IP67 | EL-6X16A-IP67
Code: EL-6X16A-IP67Price 384.76 € VAT incl.( 317.99 € VAT excl. )EL-6X16A-IP67 – mobile power distribution unit with 6 single-phase CEE 16 A sockets and individual C16 breakers.
- Sockets: 6×CEE 16 A 3P, 230 V
- Inlet: CEE 32 A 5P
- Protection: 6×C16, no RCD
- Enclosure: IP67, sealed enclosure
-
Mobile power distribution unit | 6×CEE 16 A 3P 230 V | inlet CEE 32 A 5P | 6×C16 | voltmeter | sealed IP67 | EL-6X16A-IP67
EL-6X16A-IP67 is a mobile power distribution unit with six single-phase CEE 16 A 3P (230 V) sockets, a separate C16 circuit breaker for each socket and a built-in voltmeter. It is powered via a three-phase CEE 32 A 5P inlet plug, so it connects to a standard 32 A industrial socket, and the sealed IP67 enclosure allows outdoor use.
Key idea:
One 32 A three-phase socket becomes six protected 230 V sockets. The sockets are single-phase (blue, 3P = L+N+PE), not three-phase, so the unit is intended for single-phase equipment: tools, floodlights, heaters, chargers. There is no residual current device (RCD) in the unit – it must be provided in the supplying board.Sockets
6×CEE 16 A 3P, 230 VInlet
CEE 32 A 5P plug, 400 VProtection
6×C16 1P, no RCDEnclosure
IP67, sealed enclosureHow it works
The unit is connected via the CEE 32 A 5P plug to an industrial socket or a generator. The three phases, neutral and protective conductor are distributed to six single-phase sockets.
Each 230 V socket is protected by its own C16 circuit breaker, so an overload or short circuit on one socket trips only that line. The built-in voltmeter shows the supply voltage.
The result is a single temporary or mobile distribution point for six single-phase loads, with the load spread across three phases.
Why choose EL-6X16A-IP67?
Powers six single-phase devices from one 32 A three-phase socket without a chain of extension leads and multi-plugs. Separate breakers and the voltmeter make on-site control easier, and the IP67 enclosure withstands rain, mud and dust.Technical specifications
Product type Mobile power distribution unit with socket outlets Model / code EL-6X16A-IP67 Socket outlets 6× CEE 16 A 3P (2P+PE), 230 V, blue Inlet plug 1× CEE 32 A 5P (3P+N+PE), 400 V, red Circuit breakers 6× C16 1P – one per socket Residual current device (RCD) None – required in the supplying board Voltage indication Built-in voltmeter Protection rating IP67, sealed enclosure, cover over devices Dimensions 400 × 150 × 100 mm Mounting Mobile / hanging / wall-mounted Key functions
- Six 230 V CEE sockets – several single-phase loads in one place.
- Separate C16 per socket – a fault on one line does not switch off the others.
- CEE 32 A 5P inlet – quick connection to an industrial socket or generator.
- Voltmeter – shows whether the unit is energised.
- IP67 enclosure – for work in rain, mud and dust.
Where is it used?
- Construction and renovation sites (together with a site distribution board)
- Events, fairs, outdoor stages
- Farms and agricultural buildings
- Road works and temporary workstations
- Generator power distribution
- On-site service
Use by need
For construction or repair crews.
One unit instead of several extension leads – a tidier and safer workplace.For event technicians.
Six protected sockets for lighting and sound from one 32 A inlet.For electricians.
Quick temporary distribution when the supplying socket has a 30 mA RCD.Practical application
If the site has a CEE 32 A 5P socket protected by a C32 breaker and a 30 mA RCD, the unit is plugged into it and six loads – tools, floodlights, a heater – are distributed so that the load on each phase does not exceed 32 A.Advantages
- Six protected 230 V sockets
- Separate breaker for each socket
- Quick connection with CEE 32 A 5P plug
- Built-in voltmeter
- Sealed IP67 enclosure
Limitations
- No RCD – the supplying socket must have 30 mA protection
- Single-phase sockets – not for three-phase equipment
- Total load limited by the 32 A inlet
- Not a construction site board without EN 61439-4 compliance
Safety and installation notes
- Connect the unit only to a CEE 32 A 5P socket protected by a C32 (or smaller) breaker and an RCD ≤ 30 mA.
- Six 16 A sockets do not mean 96 A – the total current on each phase must not exceed 32 A.
- Use rubber cable H07RN-F 5G6 or the cable specified by the manufacturer; never use damaged cables.
- Check the voltmeter reading and the condition of plugs before work.
- Connection to fixed installations and test measurements must be carried out by a qualified electrician.
Quick selection guide
6×CEE 16 A 3P 230 VInlet 32 A 5P6×C16VoltmeterIP67No RCDSuitable when you need:- Six single-phase loads from one 32 A socket
- Temporary or mobile distribution
- Work outdoors and in wet environments
Check before use:- Whether the supplying socket has a 30 mA RCD
- Whether your equipment plugs are CEE 16 A 3P (blue)
- How the sockets are distributed across phases – to keep the load balanced
Important reminder: this is not a three-phase socket unit and it has no residual current protection – personal protection is provided by a 30 mA RCD in the supplying board.FAQ
Are the sockets three-phase?
No – all six are single-phase CEE 16 A 3P (230 V); only the inlet plug is three-phase.Is there an RCD in the unit?
No – a 30 mA RCD must be in the socket or board the unit is connected to.Which breakers are fitted?
Six C16 1P, one for each socket.How much power can be connected?
Up to 3.7 kW per socket, but the total per phase is limited by the 32 A inlet.Can it be connected to a generator?
Yes, if the generator has a CEE 32 A 5P socket and suitable protection.Is it suitable outdoors?
Yes, the IP67 version is designed for outdoor conditions.Mobile power distribution unit | 6×CEE 16 A 3P 230 V | inlet CEE 32 A 5P | 6×C16 | voltmeter | sealed IP67 | EL-6X16A-IP67
EL-6X16A-IP67 – mobile distribution unit with six CEE 16 A 3P 230 V sockets, individual C16 breakers, voltmeter and CEE 32 A 5P inlet, sealed IP67 enclosure. Connect only to a socket protected by a 30 mA RCD.
Published: 2026-10-30 · Data verified against supplier specification: 2026-10-30
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.The IP protection class indicates the device's resistance to environmental factors.

The first digit indicates protection against dust and solid objects.
The second digit indicates protection against moisture.First digit values:
X — Untested;
0 — No protection;
1 — Protected against solid objects larger than 50 mm;
2 — Protected against solid objects larger than 12.5 mm;
3 — Protected against solid objects larger than 1 mm;
4 — Protected against solid objects larger than 1 mm;
5 — Dust protected;
6 — Totally dustproof.
Second digit values:X — Untested;
0 — No protection;
1 — Protected against vertically falling water drops;
2 — Protected against water drops falling at a 15º angle;
3 — Protected against rain falling at a 60º angle;
4 — Protected against water splashes;
5 — Protected against water jets;
6 — Protected against large amounts of water;
7 — Protected against short-term immersion in water up to 1 meter deep;
8 — Protected against long-term immersion in water up to 3 meters deep.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Single-cable membrane entry flange | for Ø86 mm hole | cable Ø55–70 mm | flange Ø123.1 mm | grey | IP67 | HT Hi Tech Polymers | HTX-1Code: Sandariklis HTX-1HTX-1 is a membrane entry flange for one thick power cable Ø55–70 mm. It fits a round Ø86 mm hole in the enclosure wall, flange diameter Ø123.1 mm. Sealing rating is IP67 according to the latest manufacturer's sheet.
Price 21.78 € VAT incl.( 18.00 € VAT excl. )Wire connector | universal electrical terminal | 5x0.2–4mm² | for all conductor types | WAGO | 221-415 | 4055143234658Code: WAGO 221-415WAGO 221-415 is a universal 5-conductor wire connector designed for fast and reliable connection of different conductor types. It is suitable for 0.2–4 mm² conductors, including solid, stranded and flexible wires. The transparent housing and lever design make wire insertion, inspection and reconnection easy.
Price 0.57 € VAT incl.( 0.47 € VAT excl. )Flexible Rubber Cable H07RN-F | 3 × 1.5 mm² | 450/750 V AC | Black | 1 mCode: H07RN-F 3x1.5Flexible Rubber Cable H07RN-F | 3 × 1.5 mm²H07RN-F 3 × 1.5 mm² is a flexible three-core rubber power cable for connecting portable electrical appliances, power tools and industrial equipment. EPR core insulation and a PCP outer sheath provide flexibility and mechanical protection in demanding operating conditions.
3 × 1.5mm² 450/750 VRated voltage EPR / PCPInsulation / sheath 1 mSales unit Technical parameter Value Cable type H07RN-F Number of cores and cross-section 3 × 1.5 mm² Rated voltage 450/750 V AC Insulation / sheath EPR / PCP Colour Black Sales unit 1 m Applications: construction equipment, workshops, industrial machinery, pumps and portable electrical power connections. Important: permissible current depends on installation conditions. Verify the presence of a protective earth (PE) conductor from the cable marking.Price 1.51 € VAT incl.( 1.25 € VAT excl. )Terminal | connector paste for contacts | reduces oxidation | 35.3g | WAGO | ALU PLUS | 249-130 | for connecting aluminium and copper wiresCode: 4017332133890Contact paste designed to protect aluminum conductors from oxidation and ensure a reliable electrical connection. This special paste allows aluminum and copper conductors to be safely and efficiently connected within the same connector, making it particularly useful when renovating older electrical installations where aluminum wiring is commonly found.
Aluminum naturally oxidizes, and the resulting oxide layer increases contact resistance, causes connection heating, and may become a source of electrical faults. By using WAGO ALU-PLUS, the oxidation layer is reduced, electrical conductivity is improved, and the service life of the connection is significantly extended.
Price 2.83 € VAT incl.( 2.34 € VAT excl. )Cable gland with locknut and gasket | PG7 | for cable Ø3–6.5 mm | grey | IP68 | 4772124000810Code: 00810Plastic PG7 cable gland with locknut and gasket for routing Ø3–6.5 mm round cables into distribution boards and junction boxes. Provides IP68 sealing when correctly installed.
Price 0.20 € VAT incl.( 0.17 € VAT excl. )















