Products catalog

  • Mobile power distribution unit | 6×CEE 16 A 3P 230 V | inlet CEE 32 A 5P | 6×C16 | voltmeter | EL-6X16A

    Code: EL-6X16A

    EL-6X16A – mobile power distribution unit with 6 single-phase CEE 16 A sockets and individual C16 breakers.

    • Sockets: 6×CEE 16 A 3P, 230 V
    • Inlet: CEE 32 A 5P
    • Protection: 6×C16, no RCD
    • Enclosure: not specified – indoor use
  • Mobile power distribution unit | 6×CEE 16 A 3P 230 V | inlet CEE 32 A 5P | 6×C16 | voltmeter | EL-6X16A

    EL-6X16A is a mobile power distribution unit with six single-phase CEE 16 A 3P (230 V) sockets, a separate C16 circuit breaker for each socket and a built-in voltmeter. It is powered via a three-phase CEE 32 A 5P inlet plug, so it connects to a standard 32 A industrial socket.

    Key idea:
    One 32 A three-phase socket becomes six protected 230 V sockets. The sockets are single-phase (blue, 3P = L+N+PE), not three-phase, so the unit is intended for single-phase equipment: tools, floodlights, heaters, chargers. There is no residual current device (RCD) in the unit – it must be provided in the supplying board.
    Sockets
    6×CEE 16 A 3P, 230 V
    Inlet
    CEE 32 A 5P plug, 400 V
    Protection
    6×C16 1P, no RCD
    Enclosure
    not specified – indoor use

    How it works

    The unit is connected via the CEE 32 A 5P plug to an industrial socket or a generator. The three phases, neutral and protective conductor are distributed to six single-phase sockets.

    Each 230 V socket is protected by its own C16 circuit breaker, so an overload or short circuit on one socket trips only that line. The built-in voltmeter shows the supply voltage.

    The result is a single temporary or mobile distribution point for six single-phase loads, with the load spread across three phases.

    Why choose EL-6X16A?
    Powers six single-phase devices from one 32 A three-phase socket without a chain of extension leads and multi-plugs. Separate breakers and the voltmeter make on-site control easier.

    Technical specifications

    Product type Mobile power distribution unit with socket outlets
    Model / code EL-6X16A
    Socket outlets 6× CEE 16 A 3P (2P+PE), 230 V, blue
    Inlet plug 1× CEE 32 A 5P (3P+N+PE), 400 V, red
    Circuit breakers 6× C16 1P – one per socket
    Residual current device (RCD) None – required in the supplying board
    Voltage indication Built-in voltmeter
    Protection rating Not specified by manufacturer – use indoors and in protected areas
    Dimensions 400 × 150 × 100 mm
    Mounting Mobile / hanging / wall-mounted

    Key functions

    • Six 230 V CEE sockets – several single-phase loads in one place.
    • Separate C16 per socket – a fault on one line does not switch off the others.
    • CEE 32 A 5P inlet – quick connection to an industrial socket or generator.
    • Voltmeter – shows whether the unit is energised.
    • Compact enclosure – 400 × 150 × 100 mm, easy to move.

    Where is it used?

    • Workshops and production halls
    • Warehouses and logistics centres
    • On-site service and repair (indoors)
    • Indoor events and exhibitions
    • Technical rooms
    • Temporary indoor workstations

    Use by need

    For workshop or plant managers.
    One unit instead of several extension leads – a tidier and safer workplace.
    For event technicians.
    Six protected sockets for lighting and sound from one 32 A inlet.
    For electricians.
    Quick temporary distribution when the supplying socket has a 30 mA RCD.

    Practical application

    If the site has a CEE 32 A 5P socket protected by a C32 breaker and a 30 mA RCD, the unit is plugged into it and six loads – tools, floodlights, a heater – are distributed so that the load on each phase does not exceed 32 A.

    Advantages

    • Six protected 230 V sockets
    • Separate breaker for each socket
    • Quick connection with CEE 32 A 5P plug
    • Built-in voltmeter
    • Compact and easy to move

    Limitations

    • No RCD – the supplying socket must have 30 mA protection
    • Single-phase sockets – not for three-phase equipment
    • Total load limited by the 32 A inlet
    • IP rating not specified – not for outdoor use

    Safety and installation notes

    • Connect the unit only to a CEE 32 A 5P socket protected by a C32 (or smaller) breaker and an RCD ≤ 30 mA.
    • Six 16 A sockets do not mean 96 A – the total current on each phase must not exceed 32 A.
    • Use rubber cable H07RN-F 5G6 or the cable specified by the manufacturer; never use damaged cables.
    • Check the voltmeter reading and the condition of plugs before work.
    • Connection to fixed installations and test measurements must be carried out by a qualified electrician.

    Quick selection guide

    6×CEE 16 A 3P 230 V
    Inlet 32 A 5P
    6×C16
    Voltmeter
    Indoor
    No RCD
    Suitable when you need:
    • Six single-phase loads from one 32 A socket
    • Temporary or mobile distribution
    • Work in workshops and indoors
    Check before use:
    • Whether the supplying socket has a 30 mA RCD
    • Whether your equipment plugs are CEE 16 A 3P (blue)
    • How the sockets are distributed across phases – to keep the load balanced
    Important reminder: this is not a three-phase socket unit and it has no residual current protection – personal protection is provided by a 30 mA RCD in the supplying board.

    FAQ

    Are the sockets three-phase?
    No – all six are single-phase CEE 16 A 3P (230 V); only the inlet plug is three-phase.
    Is there an RCD in the unit?
    No – a 30 mA RCD must be in the socket or board the unit is connected to.
    Which breakers are fitted?
    Six C16 1P, one for each socket.
    How much power can be connected?
    Up to 3.7 kW per socket, but the total per phase is limited by the 32 A inlet.
    Can it be connected to a generator?
    Yes, if the generator has a CEE 32 A 5P socket and suitable protection.
    Is it suitable outdoors?
    No – for outdoor use choose the EL-6X16A-IP67 version.

    Mobile power distribution unit | 6×CEE 16 A 3P 230 V | inlet CEE 32 A 5P | 6×C16 | voltmeter | EL-6X16A

    EL-6X16A – mobile distribution unit with six CEE 16 A 3P 230 V sockets, individual C16 breakers, voltmeter and CEE 32 A 5P inlet. Connect only to a socket protected by a 30 mA RCD.

    Published: 2026-10-30 · Data verified against supplier specification: 2026-10-30

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Cable gland with locknut and gasket | PG7 | for cable Ø3–6.5 mm | grey | IP68 | 4772124000810
    Code: 00810

    Plastic PG7 cable gland with locknut and gasket for routing Ø3–6.5 mm round cables into distribution boards and junction boxes. Provides IP68 sealing when correctly installed.

    Price 0.20 € VAT incl.
    ( 0.17 € VAT excl. )
    Flexible Rubber Cable H07RN-F | 3 × 1.5 mm² | 450/750 V AC | Black | 1 m
    Code: H07RN-F 3x1.5
    Flexible Rubber Cable H07RN-F | 3 × 1.5 mm²

    H07RN-F 3 × 1.5 mm² is a flexible three-core rubber power cable for connecting portable electrical appliances, power tools and industrial equipment. EPR core insulation and a PCP outer sheath provide flexibility and mechanical protection in demanding operating conditions.

    3 × 1.5mm² 450/750 VRated voltage EPR / PCPInsulation / sheath 1 mSales unit Technical parameter Value Cable type H07RN-F Number of cores and cross-section 3 × 1.5 mm² Rated voltage 450/750 V AC Insulation / sheath EPR / PCP Colour Black Sales unit 1 m Applications: construction equipment, workshops, industrial machinery, pumps and portable electrical power connections. Important: permissible current depends on installation conditions. Verify the presence of a protective earth (PE) conductor from the cable marking.
    Price 1.51 € VAT incl.
    ( 1.25 € VAT excl. )
    Wire connector | universal electrical terminal | 5x0.2–4mm² | for all conductor types | WAGO | 221-415 | 4055143234658
    Code: WAGO 221-415

    WAGO 221-415 is a universal 5-conductor wire connector designed for fast and reliable connection of different conductor types. It is suitable for 0.2–4 mm² conductors, including solid, stranded and flexible wires. The transparent housing and lever design make wire insertion, inspection and reconnection easy.

    Price 0.57 € VAT incl.
    ( 0.47 € VAT excl. )
    Terminal | connector paste for contacts | reduces oxidation | 35.3g | WAGO | ALU PLUS | 249-130 | for connecting aluminium and copper wires
    Code: 4017332133890

    Contact paste designed to protect aluminum conductors from oxidation and ensure a reliable electrical connection. This special paste allows aluminum and copper conductors to be safely and efficiently connected within the same connector, making it particularly useful when renovating older electrical installations where aluminum wiring is commonly found.

    Aluminum naturally oxidizes, and the resulting oxide layer increases contact resistance, causes connection heating, and may become a source of electrical faults. By using WAGO ALU-PLUS, the oxidation layer is reduced, electrical conductivity is improved, and the service life of the connection is significantly extended. 

    Price 2.83 € VAT incl.
    ( 2.34 € VAT excl. )
    Single-cable membrane entry flange | for Ø86 mm hole | cable Ø55–70 mm | flange Ø123.1 mm | grey | IP67 | HT Hi Tech Polymers | HTX-1
    Code: Sandariklis HTX-1

    HTX-1 is a membrane entry flange for one thick power cable Ø55–70 mm. It fits a round Ø86 mm hole in the enclosure wall, flange diameter Ø123.1 mm. Sealing rating is IP67 according to the latest manufacturer's sheet.

    Price 21.78 € VAT incl.
    ( 18.00 € VAT excl. )
  • privacy policy

    Information