Products catalog

  • Industrial modular socket panel | 1×CEE 16 A 5P 400 V + 1×CEE 32 A 5P 400 V + 4×Schuko 230 V | space for 12 modules of protection | IP44 | Famatel 3959 0014E

    Code: 3959 0014E
    Barcode: 5903148990651

    Famatel 3959 0014E – a sealed industrial panel with sockets (1×CEE 16 A 5P 400 V + 1×CEE 32 A 5P 400 V + 4×Schuko 230 V) and space for 12 modules of protective devices. Degree of protection: IP44, mounting – wall-mounted (surface).

  • Industrial modular socket panel | 1×CEE 16 A 5P 400 V + 1×CEE 32 A 5P 400 V + 4×Schuko 230 V | space for 12 modules of protection | IP44 | Famatel 3959 0014E

    Famatel 3959 0014E – a sealed industrial panel with sockets (1×CEE 16 A 5P 400 V + 1×CEE 32 A 5P 400 V + 4×Schuko 230 V) and space for 12 modules of protective devices. Degree of protection: IP44, mounting – wall-mounted (surface).

    Key idea:
    The panel is designed for places where powerful 3-phase equipment is used: the CEE 32 A socket takes welders, compressors or heaters, while the 230 V sockets take hand tools and lighting. The space for 12 modules allows circuit breakers and an RCD to be installed to suit your loads.
    Sockets
    1×CEE 16 A 5P 400 V + 1×CEE 32 A 5P 400 V + 4×Schuko 230 V
    Modules
    12 mod. space for protection
    Degree of protection
    IP44
    Voltage
    230/400 V

    How it works

    The panel is fixed to a wall and supplied with a 3-phase 230/400 V cable (3 phases, N, PE). The sockets are factory-installed in the enclosure.

    Circuit breakers and an RCD are fitted in the modular space (12 mod.) – so each socket or socket group gets its own protection against overload, short circuit and residual current.

    The result is a sealed IP44 distribution point where equipment is connected via industrial CEE and 230 V sockets, with the protection right there – visible and easy to reach.

    Why choose Famatel 3959 0014E?
    Sockets and space for protection in one enclosure: no need to assemble a box, sockets and a modular panel separately. You can choose the protection exactly to suit the connected equipment.

    Technical specifications

    Product typeModular panel with sockets
    Manufacturer / modelFamatel 3959 0014E
    Code3959 0014E
    EAN5903148990651
    3-phase sockets1× CEE 16 A 5P 400 V; 1× CEE 32 A 5P 400 V
    Single-phase sockets4× Schuko 230 V
    Modular space12 modules
    Protective devicesnot installed; space for 12 modules of protective devices
    Degree of protectionIP44
    Dimensions360 × 260 × 130 mm
    Network230/400 V, 50 Hz
    Mountingwall-mounted (surface)

    Main functions

    • 3-phase CEE sockets (1×16 A, 1×32 A) – for machines, compressors, welders.
    • 4 single-phase 230 V sockets – for hand tools, chargers, lighting.
    • Space for 12 modules – for circuit breakers and an RCD directly in the panel.
    • IP44 protection – suitable for damp and dusty rooms.
    • Wall mounting – a fixed, tidy socket point.

    Where is it used?

    • Car and metalworking workshops
    • Production halls and repair bases
    • Farms and agricultural machinery
    • Fixed points on construction sites
    • Warehouses and logistics centres
    • Garages with 3-phase equipment

    Use by need

    For the workshop owner.
    One sealed point for the welder, compressor and tools.
    For the electrician.
    A ready enclosure with sockets – only the protection in the 12-module space remains to be installed.
    For the farmer.
    3-phase power for farm machinery with separate protection for each socket.

    Practical application

    If a welder with a CEE 32 A plug has to be connected in a workshop with a grinder and lighting used nearby, suitably rated circuit breakers and an RCD are installed in the modular space of the panel – each socket gets its own protection.

    Pros

    • Sockets and space for protection in one enclosure
    • IP44 protection
    • Space for 12 modules
    • 3-phase and single-phase sockets together
    • Protection can be chosen for the specific equipment

    Cons / limitations

    • Protective devices are not installed – they must be purchased and fitted separately
    • Does not replace the main distribution or metering board
    • Installation must be carried out by a qualified electrician

    Safety and installation notes

    • Connection and installation of protection must be carried out by a qualified electrician.
    • Protect each socket or socket group with a circuit breaker and the socket circuits with an RCD (30 mA).
    • Select the supply cable cross-section for the total load and line length.
    • IP44 sealing is ensured only with the lids closed and sealed cable glands used.
    • Mount with the sockets facing down or sideways so that water does not enter the plugs.

    Quick selection guide

    230/400 V
    1×CEE 16 A
    1×CEE 32 A
    4×230 V
    12 mod.
    IP44
    Suitable when you need:
    • 3-phase and single-phase sockets in one place
    • Protection right next to the sockets
    • A sealed IP44 solution
    Check before use:
    • Which circuit breaker ratings and RCD you need
    • That the equipment plugs match the CEE 16/32 A sockets
    • That the supply cable matches the total load
    Important reminder: The panel is supplied without protective devices – it must not be used without circuit breakers and an RCD.

    FAQ

    Does the panel have circuit breakers?
    No, there is space for 12 modules of protective devices.
    Which sockets are installed?
    1×CEE 16 A 5P 400 V + 1×CEE 32 A 5P 400 V + 4×Schuko 230 V.
    What is the degree of protection?
    IP44.
    Can a welder be connected?
    Yes, if its plug is CEE 32 A or 16 A 5P and the protection is sized for its current.
    Where is the panel mounted?
    On a wall or structure, surface-mounted.
    Who should install it?
    A qualified electrician, who also fits the protection.

    Industrial modular socket panel | 1×CEE 16 A 5P 400 V + 1×CEE 32 A 5P 400 V + 4×Schuko 230 V | space for 12 modules of protection | IP44 | Famatel 3959 0014E

    Famatel 3959 0014E – an industrial IP44 panel with 1×CEE 16 A 5P 400 V + 1×CEE 32 A 5P 400 V + 4×Schuko 230 V sockets and space for 12 modules of protection – for garages, workshops, farms and technical rooms.

    Published: 2026-11-15 · Data verified against the manufacturer / supplier specification: 2026-11-15

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Cable gland with locknut and gasket | PG7 | for cable Ø3–6.5 mm | grey | IP68 | 4772124000810
    Code: 00810

    Plastic PG7 cable gland with locknut and gasket for routing Ø3–6.5 mm round cables into distribution boards and junction boxes. Provides IP68 sealing when correctly installed.

    Price 0.20 € VAT incl.
    ( 0.17 € VAT excl. )
    Single-cable membrane entry flange | for Ø86 mm hole | cable Ø55–70 mm | flange Ø123.1 mm | grey | IP67 | HT Hi Tech Polymers | HTX-1
    Code: Sandariklis HTX-1

    HTX-1 is a membrane entry flange for one thick power cable Ø55–70 mm. It fits a round Ø86 mm hole in the enclosure wall, flange diameter Ø123.1 mm. Sealing rating is IP67 according to the latest manufacturer's sheet.

    Price 21.78 € VAT incl.
    ( 18.00 € VAT excl. )
    Terminal | connector paste for contacts | reduces oxidation | 35.3g | WAGO | ALU PLUS | 249-130 | for connecting aluminium and copper wires
    Code: 4017332133890

    Contact paste designed to protect aluminum conductors from oxidation and ensure a reliable electrical connection. This special paste allows aluminum and copper conductors to be safely and efficiently connected within the same connector, making it particularly useful when renovating older electrical installations where aluminum wiring is commonly found.

    Aluminum naturally oxidizes, and the resulting oxide layer increases contact resistance, causes connection heating, and may become a source of electrical faults. By using WAGO ALU-PLUS, the oxidation layer is reduced, electrical conductivity is improved, and the service life of the connection is significantly extended. 

    Price 2.83 € VAT incl.
    ( 2.34 € VAT excl. )
    Wire connector | universal electrical terminal | 5x0.2–4mm² | for all conductor types | WAGO | 221-415 | 4055143234658
    Code: WAGO 221-415

    WAGO 221-415 is a universal 5-conductor wire connector designed for fast and reliable connection of different conductor types. It is suitable for 0.2–4 mm² conductors, including solid, stranded and flexible wires. The transparent housing and lever design make wire insertion, inspection and reconnection easy.

    Price 0.57 € VAT incl.
    ( 0.47 € VAT excl. )
  • Subscribtion to new arrivals

    privacy policy

    Information