Products catalog

Home/Product Catalog/Electrical distribution and installation/Electrical Distribution Panels, Boxes & Accessories/Special electrical panels for garages | panels designed for commercial premises/Industrial combined distribution boards | enclosures with socket outlets
  • New item   Industrial socket box | 1×32 A 5P 400 V + 2×Schuko 230 V | wall-mounted | no protective devices | IP54 | Scame 686D.322
    New item   Industrial socket box | 1×32 A 5P 400 V + 2×Schuko 230 V | wall-mounted | no protective devices | IP54 | Scame 686D.322 1
    New item   Industrial socket box | 1×32 A 5P 400 V + 2×Schuko 230 V | wall-mounted | no protective devices | IP54 | Scame 686D.322 2
    New item   Industrial socket box | 1×32 A 5P 400 V + 2×Schuko 230 V | wall-mounted | no protective devices | IP54 | Scame 686D.322 3

    Industrial socket box | 1×32 A 5P 400 V + 2×Schuko 230 V | wall-mounted | no protective devices | IP54 | Scame 686D.322

    Code: 686D.322
    Barcode: 8585022770305
    Inquire about this item
    Price 28.40 € VAT incl.
    ( 23.47 € VAT excl. )

    Wall-mounted Scame E-BOX socket box with one CEE 32 A 5P 400 V socket and two Schuko 16 A 230 V sockets. IP54 enclosure in UV-stable, halogen-free thermoplastic. No protective devices inside – the MCB and 30 mA RCD are installed in the supply board.

  • Product description

    Industrial socket box | 1×32 A 5P 400 V + 2×Schuko 230 V | wall-mounted | no protective devices | IP54 | Scame 686D.322

    Scame 686D.322 is a wall-mounted combined socket box with one CEE 32 A 5P 400 V socket and two Schuko 230 V sockets. It is intended for garages, workshops and commercial premises where both three-phase and household equipment is connected to one circuit. There are no protective devices in the enclosure – the sockets are wired directly to the supply terminals.

    Key point:
    One IP54 box gives you a three-phase 32 A socket for a welder, compressor or heater plus two Schuko sockets for hand tools. With no MCBs or RCD inside, all protection is selected in the distribution board – a compact, low-cost solution when the board is nearby.
    Sockets
    1×CEE 32 A 5P + 2×Schuko 16 A
    Protection
    IP54
    Protective devices
    none – protection in the board
    Mounting
    wall-mounted

    How it works

    The box is fixed to the wall and connected with a fixed cable to the internal terminals. The Schuko sockets need a neutral conductor, so a 5-core cable (L1, L2, L3, N, PE) is used.

    The CEE 32 A 5P socket (3P+N+E, 6h) is fed by all three phases, while the Schuko sockets use phase-to-neutral 230 V. All sockets share the same supply circuit.

    With the lids closed the enclosure is rated IP54 – protected against dust and splashing water. Overload, short-circuit and earth-leakage protection is provided by the MCB and RCD in the board that feeds the box.

    Why choose Scame 686D.322?
    It is the simplest way to have a 32 A three-phase socket and two household sockets in one place in a garage or workshop, without separate boxes and extra joints. The UV-stable, halogen-free thermoplastic enclosure suits indoor use and sheltered outdoor locations.

    Technical specifications

    Product type Combined socket box, wall-mounted
    Manufacturer / model Scame, E-BOX series, 686D.322 (data per Scame E-BOX 686.322)
    CEE socket 1× 32 A, 5P (3P+N+E), 400 V, 6h
    Household sockets 2× Schuko 16 A, 230 V
    Rated voltage 250/400 V
    Protective devices None (no space provided for modules)
    Ingress protection IP54 (with lids closed)
    Enclosure material Thermoplastic, UV-stable, halogen-free
    Dimensions (W × H × D) approx. 150 × 110 × 70 mm (distributor data)
    Mounting Wall (surface)
    Supply Fixed cable to internal terminals (5-core)

    Key functions

    • Three-phase 32 A socket – for welders, compressors, heaters and other 400 V equipment up to 32 A.
    • Two Schuko sockets – for hand tools, lighting and chargers next to the three-phase machine.
    • IP54 enclosure – protection against dust and splashing water in garages, workshops and stores.
    • No internal devices – lower price and size, protection concentrated in the board.
    • UV-stable, halogen-free thermoplastic – does not fade under shelter and emits no halogen gases when burning.
    • Wall-mounted enclosure – sockets always in one place, no cables lying on the floor.

    How does it differ from similar products?

    Scame 686D.122 (4490) Same series but with a 16 A 5P socket – for equipment up to 16 A, lower price.
    Famatel 3070 (8573) Also 1×32 A 5P + 2×230 V – an alternative from another manufacturer.
    SEZ ROS4/V-10 (2228) 1×32 A 5P + 2×230 V with a 3-pole switch-disconnector – sockets can be isolated locally, but costs more.

    Where is it used?

    • Garages and car service shops
    • Metal and woodworking workshops
    • Farm buildings and agricultural sheds
    • Warehouses and production areas
    • Technical areas of commercial premises
    • Boiler rooms and plant rooms where 400 V equipment is connected occasionally

    Use by need

    For beginners.
    This is a socket box without breakers: an electrician connects it from a board that already has the circuit MCB and a 30 mA RCD.
    For experienced installers.
    Use a 5-core cable – the Schuko sockets need N. If the circuit is protected by an MCB above 16 A, the Schuko sockets need separate 16 A protection, or choose a box with built-in MCBs.
    For energy engineers / designers.
    The box is a socket outlet point without protective devices; selectivity, RCD type and cable size are set by the design. Check the total load – all sockets share one circuit.

    Practical use

    In a garage the box is fed from the house board with a 5-core cable through an MCB sized to the cable and a 30 mA RCD. A compressor or welder is plugged into the CEE socket, an angle grinder and a floodlight into the Schuko sockets. Because a 32 A MCB does not protect the 16 A Schuko sockets against overload, the electrician adds separate 16 A protection for them or selects a box with built-in MCBs.

    Pros / advantages

    • Three-phase 32 A and two Schuko sockets in one enclosure
    • IP54 with lids closed
    • Wall mounting – sockets always in one fixed place
    • UV-stable, halogen-free enclosure
    • Simple connection – fewer joints and devices

    Cons / limitations

    • No MCBs, RCD or fuses – all protection must be in the board
    • Schuko sockets have no separate 16 A protection – extra protection needed on a 32 A circuit
    • No switch to isolate the sockets – alternative: SEZ ROS4/V-10 (2228) with a 3-pole switch-disconnector
    • IP54 is not suitable for water jets or wash-down areas – choose IP67 solutions there

    Safety and installation notes

    • ⚡ Installation and connection by a qualified electrician only, with the supply isolated.
    • ⚡ Protect the supply circuit with an MCB rated to the cable cross-section (max. 32 A) and a 30 mA RCD for the socket circuit.
    • The Schuko sockets are rated 16 A: if the circuit MCB is above 16 A, separate 16 A protection for the Schuko sockets is mandatory.
    • Use a 5-core cable with N and PE – without N the Schuko sockets will not work, and PE is mandatory for all sockets.
    • On construction sites, feed the box only from a site distribution board (HD 60364-7-704).
    • IP54 applies only with the socket lids closed and the cable entry properly sealed.

    Quick selection guide

    1×CEE 32 A 5P 400 V
    2×Schuko 16 A 230 V
    IP54
    No protective devices
    Suitable when you need:
    • three-phase 32 A and household sockets in one place
    • a compact wall-mounted solution for a garage or workshop
    • protection already installed in the distribution board
    Check before choosing:
    • the board has an MCB sized to the cable and a 30 mA RCD
    • the equipment plug is CEE 32 A 5P (not 16 A and not 4P)
    • 16 A protection is provided for the Schuko sockets
    Important reminder: The box contains no MCBs, RCD or fuses – it does not replace a distribution board. All protection is installed in the supply board.
    ☝ Elsprendimai.eu recommends:

    FAQ

    Does the box contain a fuse or an MCB?
    No. The Scame E-BOX unit has no protective devices and no space is provided for modules – protection is installed in the board that feeds it.
    What cable should be used?
    A 5-core cable (3 phases, N, PE). The electrician selects the cross-section based on the circuit MCB and cable length.
    Will a 16 A CEE plug fit?
    No. CEE 32 A and 16 A plugs differ in size. For 16 A equipment choose Scame 686D.122.
    Can it be installed outdoors?
    IP54 protects against dust and splashes with the lids closed – suitable under a shelter. For water jets or flood-prone places choose an IP67 model.
    Can all sockets be used at the same time?
    Yes, as long as the total load does not exceed the circuit MCB rating and the Schuko load does not exceed 16 A.
    Can MCBs be added later?
    No – this is a box without space for modules; if local protection is needed, choose a socket box with MCBs.

    Sources: Data per Scame E-BOX 686.322: Scame SK (scame.sk) and Scame Polska (scame.pl) catalogues; distributor data from ELMIT and ELIM. Checked 2026-10-20.

    Scame 686D.322 socket box 1×32 A 5P + 2×Schuko, IP54

    Wall-mounted Scame E-BOX socket box with one CEE 32 A 5P 400 V and two Schuko 230 V sockets, IP54, no built-in protective devices – protection is installed in the board.

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.

  • Alternative products

    Weatherproof socket box | 1×Schuko 16 A 230 V | AcquaBOX | IP54 | IK08 | Famatel 3061 New item  
    Weatherproof socket box | 1×Schuko 16 A 230 V | AcquaBOX | IP54 | IK08 | Famatel 3061
    Code: 3061

    Weatherproof Famatel 3061 AcquaBOX with one pre-wired Schuko 16 A 230 V socket. IP54, IK08, Class II insulation, halogen-free ABS, 103×103×55 mm. No protective devices – a 16 A breaker and 30 mA RCD in the board.

    Price 9.67 € VAT incl.
    ( 7.99 € VAT excl. )
    Add to cart 
    Industrial socket box | 1×32 A 5P 400 V + 1×230 V 16 A | with rotary switch | wall-mounted | IP44 | Pawbol R-BOX KOMPAKT New item  
    Industrial socket box | 1×32 A 5P 400 V + 1×230 V 16 A | with rotary switch | wall-mounted | IP44 | Pawbol R-BOX KOMPAKT
    Code: RBOX 1x230V+1x32A

    Wall-mounted Pawbol R-BOX KOMPAKT socket box: 1×CEE 32 A 5P 400 V and 1×230 V 16 A sockets, rotary switch lockable at 0. IP44, PG21 cable entry. No MCBs or RCDs inside – protection is installed in the panel.

    Price 33.00 € VAT incl.
    ( 27.27 € VAT excl. )
    Add to cart 
    Industrial distribution box | enclosure | 11 modules | with socket outlets 4x230V + 2x32A 5P | sealed | for garages | commercial premises | IP54 | SEZ | ROS11/x-22 | 8585007388754 Industrial distribution box | enclosure | 11 modules | with socket outlets 4x230V + 2x32A 5P | sealed | for garages | commercial premises | IP54 | SEZ | ROS11/x-22 | 8585007388754 Top seller  
    Industrial distribution box | enclosure | 11 modules | with socket outlets 4x230V + 2x32A 5P | sealed | for garages | commercial premises | IP54 | SEZ | ROS11/x-22 | 8585007388754
    Code: 88754

    SEZ ROS11/x-22 industrial electrical distribution board with socket outlets - reliable and universal solution for power distribution in workshops, garages, construction sites and commercial premises.

    Hermetic IP54 protection class enclosure with integrated 4x 230V 16A sockets and 2x 400V 32A 5P sockets, allowing simultaneous supply of standard single-phase equipment and high-power three-phase machinery. 

    Price 62.00 € VAT incl.
    ( 51.24 € VAT excl. )
    Add to cart 
    Distribution box with plug sockets 1x16A | 1x230V | 7 mod. | for garages | commercial premises | IP44 | Polam Naklo  
    Distribution box with plug sockets 1x16A | 1x230V | 7 mod. | for garages | commercial premises | IP44 | Polam Naklo
    Code: 6263-131

    Distribution box with socket outlets 1x16A, 1x230V, 7 modules, made by Polam Naklo, designed for installation in garages and commercial premises to ensure reliable power supply and safety. This distribution box has an IP44 protection rating, making it resistant to moisture and dust, allowing it to be used both indoors and outdoors (in covered, dry areas). The box features 7 module slots, making it easy to integrate additional components if necessary. It includes two sockets – one for 16A current and the other for 230V voltage, ensuring versatile use in various electrical devices. 

    Price 36.50 € VAT incl.
    ( 30.17 € VAT excl. )
    Add to cart 

  • Subscribtion to new arrivals

    privacy policy

    Information