Manual transfer switch MTS TAXNELE TX219G | I-0-II | 2P | 63 A | 400 V | DIN
Code: ES-TX219G-63Price 47.67 € VAT incl.( 39.40 € VAT excl. )Buy more, pay less10+ pcs. – 3.05 € for pcs. -93%TAXNELE TX219G – manual two-source transfer switch MTS: positions I-0-II, 2P, 63 A, 400 V AC, DIN rail.
-
Manual transfer switch MTS TAXNELE TX219G | I-0-II | 2P | 63 A | 400 V | DIN
TAXNELE TX219G is a manual transfer switch (MTS) with three positions: I – main source, 0 – both off, II – backup source. 2P, 63 A, 400 V AC, DIN rail.
Key point
Manual transfer with a central 0 position is the simplest way to connect a generator safely without back-feeding the grid. No coils or electronics to fail.Poles / current
2P / 63 AClass
Manual MTSTransfer
manualControl
Manual I-0-IIHow it works
Position I connects the load to the first source, II to the second, 0 disconnects both. The design prevents both sources from being connected at the same time.
Manufacturer's instruction for two sources: sources are connected at the bottom (2, 4 and 6, 8), the load at the top (1 and 5). In position I, 1–2 and 5–6 are connected; in position II, 1–4 and 5–8.
When switching from one source to the other, the handle passes position 0 – the load is briefly disconnected, so the sources are never connected together.
Technical specifications
Type Manual transfer switch (MTS), I-0-II Manufacturer TAXNELE (Taixin Electric), series TX219G Poles 2P Rated current 63 A Operating voltage 400 V AC Frequency 50/60 Hz Transfer time manual Control Handle I-0-II Connection Sources at the bottom (2, 4 / 6, 8), load at the top (1 / 5) Mounting 35 mm DIN rail Standard not specified by manufacturer Data source Manufacturer nameplate and manufacturer technical information ⚠ The brand on the device is TAXNELE. The table lists only parameters stated by the manufacturer; parameters not provided by the manufacturer are not listed. Photos may show another current or pole version of the same series – check exact data on the device nameplate. TX219G is a manual switch – it has no automatic transfer.Functions
- Three positions: I – 0 – II
- Sources are never connected together
- Position 0 – safe disconnection of both sources
- DIN rail mounting
- No electronics – nothing to overheat or fail
Other versions of the same series
- For automatic transfer choose an ATS from the same group.
Applications
- Houses and homesteads with a portable generator
- Backup supply of critical circuits
- Where manual transfer is sufficient
Practical example
Homestead with a portable generator: when the grid fails, turn the handle to 0, start the generator, turn the handle to II. When the grid returns – the reverse. Back-feed to the grid is impossible.
Advantages
- No electronics
- Position 0 for safe maintenance
- Back-feed impossible
Points to note
- Manual transfer only
- Someone must be on site
- Does not break short circuits
⚡ Safe installation
- Installation must be carried out by a qualified electrician with both sources disconnected.
- Install short-circuit and overload protection upstream of the ATS on both supplies.
- Select cable cross-section for 63 A and the installation conditions.
- Connect a generator to the house installation only through a transfer switch – never through a socket outlet.
- Always stop in position 0 when switching.
How to choose
Suitable up to 63 A for a single-phase site where manual transfer is sufficient.
2P · 63 A400 V ACManual MTSmanualSuitable if:- manual transfer is sufficient
- the site is single-phase, up to 63 A
Check:- connection: sources at the bottom, load at the top
- protection upstream of the switch
Important: A transfer switch is not a protective device (except CB class) – install short-circuit and overload protection separately. If in doubt, consult a qualified electrician.Frequently asked questions
Does it transfer automatically?
No, TX219G is a manual switch.How to connect it?
Per manufacturer: sources at the bottom (2, 4 and 6, 8), load at the top (1 and 5).Can the generator back-feed the grid?
No – the sources are never connected together.Is it suitable for a three-phase site?
No, the 2P version is for a single-phase circuit.Can you help with selection?
Yes. Send us the network type, incoming protection and generator power – we will help you choose the right switch.Manual transfer switch MTS TAXNELE TX219G | I-0-II | 2P | 63 A | 400 V | DIN
Manual I-0-II switch – the simplest safe way to connect a generator without back-feed.
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Network plug | RJ45 connector (8P8C) | for UTP CAT 6e cable | unshielded | through-plug | transparentCode: WT117This RJ45 Cat.6 UTP modular plug is a high-quality 8P8C unshielded network connector type, designed for Cat.6 UTP (Unshielded Twisted Pair) cables. The special straight-through design makes cable termination easier and more convenient, as the wires can be threaded through the plug, allowing a visual check of the wire arrangement before crimping the connector.
Price 0.20 € VAT incl.( 0.17 € VAT excl. )CYKY-L 5G10 | 5×10 mm² | Copper power cable | 450/750 V | black | 1 m | LietkabelisCode: 91951013CYKY-L 5G10 (5×10 mm²) – 450/750 V copper power cable for three-phase 400 V circuits with neutral. Solid cores, PVC insulation and sheath, suitable indoors, outdoors and in the ground. AB Lietkabelis, price per 1 m.
Price 8.67 € VAT incl.( 7.17 € VAT excl. )Solar PV cable | H1Z2Z2-K | 1x4 mm² | black | 1.5 kV DC | EN 50618 | Dca | IEMMEQU HARCode: H1Z2Z2KThe cable is designed for connecting photovoltaic (solar energy) systems and interconnecting solar modules. This cable offers excellent resistance to ultraviolet (UV) rays, ozone, atmospheric effects, and temperature fluctuations. A durable and flexible single-core copper cable with double insulation ensures long service life and safe use even in the most challenging outdoor conditions. Suitable for installation both indoors and outdoors.
Price 0.98 € VAT incl.( 0.81 € VAT excl. )U-FTP Cable | 6A CAT | 4x2x23 AWG | shielded | copper | UV resistant | outdoor use | blackCode: KIF6AOUTS500The U/FTP cable is a high-quality four-pair data transmission cable designed for telecommunication, industrial, and outdoor network installations. This cable is 100% copper, ensuring maximum signal transmission efficiency and minimal signal attenuation.
It is adapted for 10 Gigabit Ethernet (10GBASE-T) data transmission at speeds of up to 10,000 Mbps and provides high electromagnetic resistance, as each pair is shielded with aluminum foil. Thanks to the PE outer layer, the cable is resistant to moisture, UV radiation, and mechanical impact, making it ideal for outdoor installations.
Price 0.73 € VAT incl.( 0.60 € VAT excl. )CYKY-L 5G2.5 | 5×2.5 mm² | Copper power cable | 450/750 V | black | 1 m | LietkabelisCode: CYKY-L 5G2,5CYKY-L 5G2.5 (5×2.5 mm²) – 450/750 V copper power cable for three-phase 400 V circuits with neutral. Solid cores, PVC insulation and sheath, suitable indoors, outdoors and in the ground. AB Lietkabelis, price per 1 m.
Price 2.33 € VAT incl.( 1.93 € VAT excl. )























