Modular electrical distribution board | enclosure | panel | with lock and glass | 12 modules | 310x265x130 mm | surface-mounted | steel | IP31
Code: NRP12ZSZPrice 55.41 € VAT incl.( 45.79 € VAT excl. )Surface-mounted 12-module electrical distribution board with lockable glazed door – a robust and compact solution for mounting modular electrical protection and control devices. The board is made of 0.8 mm steel, coated with a white RAL 9003 protective finish, while the glazed section of the door allows the status of the installed devices to be viewed without opening it. Dimensions – 310 × 265 × 130 mm, mounting – surface-mounted, protection class – IP31.
-
Modular electrical distribution board | 12 modules | with lock and glazed door | 310 × 265 × 130 mm | steel | surface-mounted | IP31 | RAL 9003
Surface-mounted modular electrical distribution board with lockable glazed door – a compact and robust solution for installing electrical protection and control devices in residential, administrative, commercial and auxiliary premises. Capacity for 12 standard DIN modules allows circuit breakers, residual current devices and other modular electrical components to be arranged in one place. The enclosure is made of 0.8 mm thick sheet steel with an electrostatically applied white RAL 9003 protective coating. The lockable door helps restrict accidental access to the internal equipment, while the glazed section allows the status of installed devices to be visually checked without opening the board. Dimensions of 310 × 265 × 130 mm and IP31 protection are suitable for indoor electrical installations.
Key point:
An electrical distribution board must not only accommodate circuit breakers, but also protect the equipment inside, ensure an orderly installation and provide convenient maintenance access. When the board is installed in a visible location, its appearance also matters. This 12-module steel board combines three features: a robust metal enclosure, lockable glazed door and compact surface-mounted construction. It allows a clear electrical distribution point to be created without forming a recessed wall niche.⚡ Spark: Phase, why does an electrical board need a glass door and a lock? Couldn’t the equipment simply be installed in a standard plastic enclosure?
⚙ Phase: A plastic board can also be suitable, but a metal enclosure provides greater structural rigidity. The glazed section allows the positions of circuit breaker handles or indicators to be checked without opening the board. The lock also helps restrict unwanted access. In addition, this is a surface-mounted model – it can be fixed directly to a wall without creating a special recess.
Module capacity
12 DIN modulesEnclosure
Steel | 0.8 mmProtection
IP31 | Class IDimensions
310 × 265 × 130 mmOperating principle
A modular electrical distribution board is a protective enclosure for electrical installations, intended to accommodate modular protection, control and distribution devices in one place. Inside the board, circuit breakers, residual current protection devices, relays and other modules are installed on the DIN mounting system according to the design of the specific electrical distribution point.
A capacity of 12 modules means that the board provides space for standard modular devices with a total occupied width not exceeding 12 modules. The width of one standard module is typically 17.5–18 mm. Therefore, when selecting protection devices, it is important to consider not only their quantity but also the module width occupied by each device.
For example, a single-pole circuit breaker usually occupies one module, while a three-phase four-pole residual current circuit breaker occupies several modules. For this reason, a 12-module board does not necessarily accommodate 12 separate devices.
The 0.8 mm thick steel enclosure forms a rigid structure that helps protect the internal electrical equipment from accidental mechanical contact. The electrostatically applied white RAL 9003 coating gives the enclosure a uniform appearance and protects the metal surface from normal indoor environmental effects.
A glazed viewing section is integrated into the board door, allowing the equipment inside to be seen. The lockable door mechanism helps control access to the distribution board. The lock is not an electrical protection device, but it contributes to organised access control for the electrical equipment.
Surface mounting means that the board enclosure is fixed directly to a wall or another suitable surface. No recessed wall niche is required, making this installation method convenient in renovated buildings, utility rooms and modernisation projects for existing electrical installations.
Protection Class I means that electrical safety is based on basic insulation and protective earthing. Accessible conductive metal parts must be connected to the protective PE conductor in accordance with the board design and electrical installation requirements.
Why is this electrical distribution board useful?
It allows up to 12 DIN modules of electrical protection and control equipment to be installed neatly in one place. The steel enclosure provides mechanical strength, the glazed door makes visual status checks easier, and the lock helps restrict access. Surface mounting is suitable for installations where a compact distribution point is required without creating a wall recess.Technical data
Product type Modular electrical distribution board / enclosure Mounting method Surface-mounted (wall-mounted) Number of modules 12 Number of modular device positions 12 standard DIN modules Enclosure material Sheet steel Steel thickness 0.8 mm Surface treatment Electrostatically applied protective paint coating Enclosure colour White, RAL 9003 Door construction Opening door with glazed section Door closure Lockable, with lock Degree of protection against external influences IP31 Protection class against electric shock Class I Enclosure height 310 mm Enclosure width 265 mm Enclosure depth 130 mm Overall dimensions 310 × 265 × 130 mm Weight 3.071 kg Usage environment Indoor electrical installations Main purpose Installation of modular electrical protection, control and distribution devices Main functions
- Capacity for 12 DIN modules – space for modular circuit breakers, residual current devices and other electrical devices.
- 0.8 mm steel enclosure – robust construction that helps protect internal components from everyday mechanical impact.
- Electrostatic protective coating – covers the steel surface and gives the enclosure an aesthetic appearance.
- RAL 9003 white colour – neutral design suitable for various residential and commercial interiors.
- Glazed door – allows the status of modular devices to be checked visually without opening the board.
- Lockable construction – helps restrict accidental or unwanted access to electrical equipment.
- IP31 degree of protection – protection against solid objects larger than 2.5 mm and vertically falling water drops.
- Protection Class I – requires protective earthing of accessible conductive metal parts.
- Surface mounting – the board is mounted on the wall without a recessed niche.
- 130 mm enclosure depth – provides space for modular equipment and cable connections while observing internal layout requirements.
- Compact dimensions – suitable for smaller electrical distribution points.
Where is it used?
- In electrical distribution circuits of individual residential houses.
- In electrical installations of apartments and small residential premises.
- In electrical distribution points in garages and workshops.
- In electrical boards for storage rooms and other dry auxiliary premises.
- In electrical installations of administrative and office premises.
- In small distribution points in shops, service premises and other commercial areas.
- In auxiliary indoor electrical systems of industrial facilities.
- In technical rooms where a lockable electrical equipment enclosure is required.
- In building renovation projects where surface-mounted board installation is selected.
- In distribution systems for lighting, socket outlets and other small-scale electrical circuits.
Use according to need
For residential users.
Suitable for a small electrical distribution point in a home, garage or utility room. The lockable glazed door helps protect internal equipment from unwanted access and allows switch status to be checked without opening the board.For electricians.
Surface mounting allows the board to be fixed to a wall without a recessed niche. The 12-module capacity is suitable for a compact arrangement of electrical distribution devices, while the steel enclosure provides a rigid base for professional installation.For engineers / designers.
The 12-module capacity, 310 × 265 × 130 mm dimensions, IP31 protection and Class I electrical protection allow the board to be assessed for small indoor electrical distribution points. The design should provide for proper device layout, conductor connections and protective earthing.Practical application
For example, a separate electrical distribution point may be required in a garage or workshop for lighting, socket outlets and auxiliary equipment. Since no wall recess is prepared, a surface-mounted steel board is selected. Inside, the required arrangement of modular circuit breakers and residual current protection devices is designed without exceeding the 12 DIN module capacity. The board is fixed to the wall, cables are introduced and connected, and the metal enclosure is connected to protective earth. After installation, the door is locked. The user can visually check the switch positions through the glazed section, while the maintenance specialist has organised access to the equipment inside.Advantages
- Robust 0.8 mm steel enclosure.
- Capacity for 12 standard DIN modules.
- Lockable door with glazed viewing section.
- Ability to check device status without opening the board.
- Electrostatically applied protective coating.
- Aesthetic white RAL 9003 colour.
- Surface mounting without a wall recess.
- Compact 310 × 265 × 130 mm dimensions.
- Class I protection construction.
- Suitable for various small indoor distribution points.
Limitations
- IP31 protection is not intended for direct rain, splashing water or intense moisture.
- The 12-module capacity limits expansion possibilities for larger electrical distribution systems.
- The steel enclosure is heavier than plastic boards of similar size.
- Class I protection requires proper protective earthing.
- The surface-mounted enclosure projects 130 mm from the mounting surface.
- The lock does not eliminate the need to ensure safe arrangement of electrical devices.
Installation and safety notes
- Installation work must be carried out by a qualified electrical specialist. Before making electrical connections, the power supply must be safely disconnected and absence of voltage verified.
- Surface mounting. The board must be installed on a suitable wall or other structural surface capable of supporting the load.
- Consider the enclosure weight. The empty board weighs 3.071 kg. Fixings must be selected taking into account the additional load from electrical equipment and cables.
- Board dimensions. Provide a mounting space of 310 × 265 × 130 mm and leave sufficient additional space for opening the door and safe servicing.
- Module capacity. Before installing devices, prepare a layout plan and calculate the total number of occupied DIN modules.
- Metal enclosure. Accessible conductive parts of a Class I board must be properly connected to the protective PE conductor.
- Door earthing. If the metal door or other conductive parts must be included in the protective earthing circuit according to the design, reliable electrical continuity must be ensured.
- Cable entry. Cable entries must be arranged so that conductor insulation is not damaged, mechanical cable retention is provided and the required enclosure protection degree is maintained.
- Protection of metal edges. When preparing cable entry openings, sharp edges must be removed and suitable cable glands or protective bushings used.
- IP31 degree of protection. The board is intended for indoor environments without direct water splashes, rain or heavy dust exposure.
- Ventilation and heat dissipation. The arrangement of modular devices must provide suitable operating and heat dissipation conditions.
- Access to electrical devices. The lock helps restrict unwanted access, but live parts must be protected independently of the door lock.
- Electrical circuit identification. Modular devices, conductors and their functions must be clearly labelled according to the board wiring diagram.
- Protective devices. The enclosure itself does not provide protection against overload, short circuit or residual current. These functions are provided by correctly selected protection devices installed inside.
- Installation inspection. After completion, check enclosure fixing, protective earth continuity, electrical connections, device labelling and door closure.
⚡ Phase tip:
When choosing a 12-module board, count the module width occupied by the devices rather than the number of circuit breakers. For example, if you plan to install a four-pole residual current circuit breaker, it may occupy several DIN modules, reducing the remaining space for other devices. Also consider future system expansion: if all 12 positions are filled immediately, there will be no space for an additional device later. With a metal board, pay particular attention to protective earthing and orderly cable entry.Quick selection guide
12 DIN modulesSteel | 0.8 mmIP31 | Class I310 × 265 × 130 mmSuitable when you need:- a compact 12 DIN module electrical distribution board
- a robust metal enclosure for indoor electrical installation
- a lockable door with glazed viewing section
- surface mounting without a wall recess
- a white RAL 9003 electrical board suitable for the room interior
- IP31 protection for dry indoor environments
Most important selection parameters:- required total number of DIN modules
- dimensions of planned circuit breakers and other devices
- mounting location and required enclosure depth
- indoor environmental conditions and suitability of IP31 protection
- cable entry and internal conductor arrangement solution
- protective earth connection of the metal enclosure
- need to lock the board and observe device status through the glass
Important reminder: An IP31 board is intended for indoor electrical installations. It is not designed for direct exposure to precipitation or intense water. Since the enclosure is metal and belongs to Protection Class I, proper protective earthing is required. Electrical safety also depends on correctly selected and installed protection devices.FAQ – Spark asks, Phase answers
⚡ Spark: What does 12 modules mean? Can I install 12 circuit breakers?
⚙ Phase: 12 modules means the total capacity in standard DIN modules. If one-module-wide devices are used, theoretically 12 such modules fit. However, two-, three- or four-pole devices may occupy more space, so the actual number of devices depends on their width.⚡ Spark: How does a steel electrical board differ from a plastic one?
⚙ Phase: A steel enclosure is rigid and resistant to everyday mechanical impact. Plastic boards are usually lighter and may have different insulation properties. A metal Class I board must be properly connected to protective earth.⚡ Spark: Can this board be installed outdoors?
⚙ Phase: No. IP31 protection is intended for indoor environments. The board is not designed for direct rain, water splashes or other intensive atmospheric exposure. Outdoor installations require enclosures with an appropriate protection rating.⚡ Spark: What exactly does IP31 mean?
⚙ Phase: The number 3 means protection against solid objects larger than 2.5 mm, while the number 1 means protection against vertically falling water drops. It is not a sealed or splash-resistant board.⚡ Spark: Why is a lock needed if only circuit breakers are installed inside?
⚙ Phase: The lock helps control access to the inside of the board. This is useful in common-use, commercial and technical premises where the risk of unwanted switching or door opening should be reduced.⚡ Spark: Does the glazed door allow me to see which breaker is switched off?
⚙ Phase: Yes, provided the device positions and door design allow them to be seen clearly. The glazed section allows the position of switch handles or indicators to be visually checked without opening the board.⚡ Spark: Does a metal board have to be earthed?
⚙ Phase: Yes. This is a Class I board, so its accessible conductive metal parts must be properly connected to the protective earthing circuit in accordance with electrical installation requirements.⚡ Spark: Can a residual current device be installed in this board?
⚙ Phase: Yes. The board is designed for standard DIN modular electrical devices, including residual current devices. The main requirement is that the total width of all devices does not exceed the 12-module capacity and that they are connected correctly.⚡ Spark: Does this board need to be recessed into the wall?
⚙ Phase: No. This is a surface-mounted board, so its enclosure is mounted on the wall surface. This solution is convenient where a special wall recess is not desired or cannot be created.⚡ Spark: Will 12 modules be enough for the electrical distribution of an entire house?
⚙ Phase: That depends on the number of circuits, the protection devices used and planned system expansion. Twelve modules may be sufficient for a small distribution point, but a larger residential house often requires a board with greater capacity.Steel 12-module electrical distribution board with lock and glass – IP31, RAL 9003
Surface-mounted modular electrical distribution board designed for 12 standard DIN modules of electrical protection and control devices. The robust 0.8 mm steel enclosure, white RAL 9003 electrostatic coating, lockable door with glazed viewing section and compact 310 × 265 × 130 mm dimensions allow an orderly electrical distribution point to be created in residential, administrative, commercial and auxiliary premises. IP31 protection, Class I electrical protection, 3.071 kg weight and surface mounting – a practical solution for small and medium indoor electrical installations where enclosure strength, convenient servicing and controlled access to equipment are important.
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.The IP protection class indicates the device's resistance to environmental factors.

The first digit indicates protection against dust and solid objects.
The second digit indicates protection against moisture.First digit values:
X — Untested;
0 — No protection;
1 — Protected against solid objects larger than 50 mm;
2 — Protected against solid objects larger than 12.5 mm;
3 — Protected against solid objects larger than 1 mm;
4 — Protected against solid objects larger than 1 mm;
5 — Dust protected;
6 — Totally dustproof.
Second digit values:X — Untested;
0 — No protection;
1 — Protected against vertically falling water drops;
2 — Protected against water drops falling at a 15º angle;
3 — Protected against rain falling at a 60º angle;
4 — Protected against water splashes;
5 — Protected against water jets;
6 — Protected against large amounts of water;
7 — Protected against short-term immersion in water up to 1 meter deep;
8 — Protected against long-term immersion in water up to 3 meters deep.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Reactive power compensation capacitor | three-phase | 0.8–50 kvar | 400/440 V | 50 Hz | Lifasa POLT / POLB HDCode: SKU#160857763282115631Lifasa POLT and POLB HD – three-phase cylindrical power capacitors for reactive power compensation in low-voltage networks, 0.8–50 kvar, 400/440 V, 50 Hz. Dry type, self-healing metallised polypropylene dielectric, overpressure disconnection system, compliant with IEC / EN 60831. Suitable for individual compensation and automatic PFC cabinets.
Price 34.44 € - 201.82 € VAT incl.( 28.46 - 166.80 € VAT excl. )Cable gland with locknut and gasket | PG7 | for cable Ø3–6.5 mm | grey | IP68 | 4772124000810Code: 00810Plastic PG7 cable gland with locknut and gasket for routing Ø3–6.5 mm round cables into distribution boards and junction boxes. Provides IP68 sealing when correctly installed.
Price 0.20 € VAT incl.( 0.17 € VAT excl. )Cable Ties with Marking Tag | 3 × 220 mm | White | 100 pcs. | 4772124000414Code: 4772124000414Price 5.32 € VAT incl.( 4.40 € VAT excl. )Edge protection profile for enclosures | for 1–2 mm sheet metal | black | 1 m | ESLLCode: ESLLBlack edge protection for cut-outs and edges in 1–2 mm sheet metal of enclosures and metal housings. Pushed onto the edge, it protects wire and cable insulation from being cut. Price per 1 m, minimum quantity 10 m.
Price 1.91 € VAT incl.( 1.58 € VAT excl. )Extended push button | 22 mm | 1NO | green | plastic | non-illuminated | IP40 | non-latching | Promfactor Baltic | FP PCPB gr Start PlCode: FP PCPB gr Start PlExtended push button Ø 22 mm, 1NO, green, IP40, Promfactor Baltic FP PCPB gr Start Pl. For control circuits: AC-15 6 A / DC-13 0.6 A, Ui 660 V.
Price 2.12 € VAT incl.( 1.75 € VAT excl. )Single-cable membrane entry flange | for Ø86 mm hole | cable Ø55–70 mm | flange Ø123.1 mm | grey | IP67 | HT Hi Tech Polymers | HTX-1Code: Sandariklis HTX-1HTX-1 is a membrane entry flange for one thick power cable Ø55–70 mm. It fits a round Ø86 mm hole in the enclosure wall, flange diameter Ø123.1 mm. Sealing rating is IP67 according to the latest manufacturer's sheet.
Price 21.78 € VAT incl.( 18.00 € VAT excl. )












