Relay for mirror heating mat control | 12VDC | 15A | IP67

Technical Specifications:

Input:

Nominal voltage: 12V DC

Operating voltage: from 9V DC to 15.6V DC

Nominal current: 30mA DC ±10% (at 23 ± 5°C)

Coil power: 360mW

Output:

Contact configuration: 1 NO (Single-pole normally open)

Contact rating (nominal): 10A, 250V AC (resistive load)

Maximum contact rating: 15A, 125V AC

Contact resistance: ≤ 100mΩ (at 6V DC, 1A)

Operate / release time: ≤ 15ms / ≤ 10ms

Insulation Characteristics:

Insulation resistance: ≥ 1000 MΩ (at 500V DC)

Dielectric strength (contacts / coil): 1500V AC, 1 min.

Between open contacts: 750V AC, 1 min.

Protection and Construction:

Protection class: IP67 (not applicable to wire ends)

Enclosure: Enclosed type

Dimensions: 32 x 22.5 x 14 mm

Weight: 23.1 g

Wires:

Output: 20 AWG, length 175 mm

Input: 22 AWG, length 175 mm

Environmental Conditions:

Operating temperature: from +5°C to +50°C

Storage temperature: from -40°C to +85°C

Storage humidity: 25%–85% RH

Compliance with Standards:

Safety: Complies with EN61810-1:2008

Features:

Allows switching 230V AC loads (e.g., mirror heating pads) using a low voltage 12V DC signal

Low power consumption – suitable for energy-saving systems

Moisture and environmental resistant (IP67)

Enclosed housing ensures long service life and dust resistance

Compact design, easy integration

Applications:

Bathroom mirror heater control

Converting low voltage control signals to high voltage loads

Automation and control systems

Home automation solutions

Safe relay control in humid or harsh environments

Pros:

IP67 protection – dust and water resistant

Compatible with 230V AC systems

Easy installation with pre-wired leads

Fast response – short operate/release time

Cons:

Single contact configuration – no changeover (NO only)

Maximum load limited to 15A – not suitable for high power loads