Relay for mirror demister pad control | coil 12 V DC | contact 1 NO 10 A / 250 V AC | ELSP-XM-R1
Code: ELSP-XM-R1Price 3.18 € VAT incl.( 2.63 € VAT excl. )Compact relay that switches a 230 V mirror heating pad with a 12 V DC signal from the mirror switch. 1 NO contact: 10 A / 250 V AC (up to 15 A only at 125 V AC). Coil 30 mA / 360 mW, coil–contact insulation 1500 V AC, compliant with EN 61810-1.
-
Relay for mirror demister pad control | coil 12 V DC | contact 1 NO 10 A / 250 V AC | ELSP-XM-R1
Compact relay with pre-wired leads that switches a 230 V anti-fog heating pad using a 12 V DC signal from the mirror switch. Contact 1 NO – 10 A / 250 V AC, coil 12 V DC / 360 mW.
Key point:
The mirror switch works at 12 V, while the heating pad runs on 230 V. The relay is the bridge: the low-voltage circuit is separated from the mains (1500 V AC insulation) and the pad switches on together with the mirror. Note: for a 230 V circuit the limit is 10 A; 15 A applies only to a 125 V AC network.Coil
12 V DC, 30 mA, 360 mWContact 230 V
1 NO, 10 A / 250 V ACInsulation
1500 V AC coil–contactsDimensions
30.3 × 22 × 18 mmOperating principle
The coil is connected to a 12 V DC output (e.g. the heating output of the mirror switch or in parallel with the lighting). When voltage is applied to the coil, the NO contact closes and switches on the 230 V heating pad.
Coil operating limits are 9–15.6 V DC, so the relay operates reliably even with voltage fluctuations. Operate time – up to 15 ms, release time – up to 10 ms.
Why choose ELSP-XM-R1?
It allows heating to be added to any 12 V mirror switch. If you are still choosing the supply, a power supply with integrated relay replaces this relay.Technical specifications
Product type Electromechanical relay with leads for heating pad control Product code ELSP-XM-R1 Coil voltage 12 V DC (operating range 9–15.6 V DC) Coil current / power 30 mA ±10 % / 360 mW Contact 1 NO (SPST-NO) Contact rating 10 A / 250 V AC (rated); 15 A / 125 V AC (max.) Contact resistance ≤ 100 mΩ (6 V DC, 1 A) Operate / release time ≤ 15 ms / ≤ 10 ms Insulation resistance ≥ 1000 MΩ (500 V DC) Dielectric strength between contacts 750 V AC; coil–contacts 1500 V AC (1 min) Housing enclosed, dust-protected Lead length 190 mm Dimensions 30.3 × 22 × 18 mm Operating temperature +5 … +50 °C Storage −40 … +85 °C, 25–85 % RH Standard EN 61810-1:2008 Key functions
- 230 V pad from a 12 V signal – heating switches on together with the mirror switch.
- Galvanic isolation – 1500 V AC between coil and contacts.
- Low coil power – 360 mW – barely loads the 12 V supply.
- Pre-wired leads – quick connection without soldering.
Where is it used?
- Bathroom mirrors with a heating pad
- Adding heating to an existing mirror
- Hotel and SPA mirrors
Use by need
For mirror manufacturers.
A universal heating control unit for any 12 V switch.For installers.
A small housing with leads fits behind the mirror.For repair.
Replacing failed heating control.Practical example
In an 800 × 600 mm mirror a 12 V switch controls the LED strip, and the relay connected to the switch heating output switches a 700 × 500 mm pad. The pad current is well below 1 A, so the 10 A contact works with a large margin.What else does the mirror kit need?
For heating control behind the mirror you need:
Heating pad
Anti-fog pads 230 V, IP54.12 V switch with heating control
e.g. touch controller with demister heating control.Junction box
IP44 box for the 230 V joint.Advantages
- 10 A / 250 V AC – a large margin for pads
- Low coil power
- 1500 V AC insulation
- Pre-wired leads
Disadvantages / limitations
- Only 1 NO contact
- Coil 12 V DC only
- Housing protected from dust but not from water – for a humid location choose the IP67 version
- 10 A in a 230 V circuit, not 15 A
Safety and installation notes
- Connect with the power off; work by a qualified electrician.
- 230 V circuit – with a 30 mA residual current device.
- The contact is rated for a 230 V load up to 10 A (resistive load).
- Make 230 V joints in a sealed box.
Quick selection guide
Coil 12 V DC1 NO | 10 A / 250 V AC1500 V AC insulation30.3 × 22 × 18 mmSuitable when you need to:- switch a 230 V pad with a 12 V signal;
- add heating to a mirror;
- a dry location behind the mirror.
Check before use:- control voltage (12 V DC);
- pad current (up to 10 A, usually < 1 A);
- humidity at the mounting location.
Important reminder: 15 A applies only to a 125 V AC network – on the European 230 V network count 10 A.Frequently asked questions
Why is 15 A sometimes stated?
15 A is the contact limit at 125 V AC. At 230 V AC the rated load is 10 A.Can I control it from 24 V?
No, the coil is 12 V DC. Choose the 24 V version.Is it suitable for a humid location?
The IP67 version is a better choice.Relay for mirror heating pad | 12 V DC | 1 NO 10 A / 250 V AC | ELSP-XM-R1
ELSP-XM-R1 – relay for switching a 230 V mirror heating pad with a 12 V DC signal: 1 NO 10 A / 250 V AC, 360 mW coil, 1500 V AC insulation, EN 61810-1:2008.
Published: 2026-11-12 · Data verified against the supplier specification: 2026-11-12
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Flexible copper cable H05VV-F | 3G1.5 mm² | 300/500 V | round | white | 1 m | LietkabelisCode: 92331501H05VV-F 3G1.5 mm² – AB Lietkabelis flexible round copper cable with class 5 conductors, PVC insulation and a white PVC sheath, 300/500 V. Sold by the metre.
Cores: L, N, PE. Indicative current ≈ 16 A – for household appliances indoors.
Price 1.04 € VAT incl.( 0.86 € VAT excl. )Sealing protective mastic tape | 25x1x500mm | for sealing cable mechanical damage area | S1052-1-500Code: S 1052-1-500Specialized self-fusing sealing tape designed for protecting and sealing damaged areas on cables. Made from black thermoplastic, highly flowable mastic, this tape effectively shields cable insulation damage from moisture, corrosion, and dust. Used for emergency or preventive repair of electrical, telecommunication, and signal cables, especially suitable for outdoor and damp environments.
Price 7.87 € VAT incl.( 6.50 € VAT excl. )Smart lighting controller | dimmer | 150W LED / 200W | 100-240V | Wi-Fi | RF 433MHz | SONOFF | D1Code: SONOFF-D1SONOFF D1 is a smart Wi-Fi and RF 433 MHz lighting dimmer for dimmable LED lamps up to 150 W and incandescent lamps up to 200 W. Controlled with the eWeLink app, the RM433 remote and by voice. Installed in an EU / 86-type box.
Price 17.40 € VAT incl.( 14.38 € VAT excl. )Cable sheath and wire stripper 0.2–4.0 mm² | ErgoStrip KNIPEXCode: 169501SBKNIPEX high-quality, ergonomically designed wire and cable stripping tool for fast, precise, and safe work. This stripping knife is highly favored by professional electricians for its versatility, durability, and practical design. Suitable for removing insulation from both signal and power wires, as well as for installation, data, and coaxial cables.
Perfectly suited for use on construction sites and in domestic installations, especially where wires need to be quickly and accurately prepared for connection in confined spaces.
Price 48.40 € VAT incl.( 40.00 € VAT excl. )Wireless control kit | actuator RFSA-61B and wall controller RFWB-40 | 866-916MHz | 230VAC | iNELS RF | RFSET-SW-F1Code: RFSET-SW-F1iNELS RF RFSET-SW-F1 is a wireless control kit: RFSA-61B actuator (230 V AC, 1 changeover contact 16 A AC1, 6 functions) and RFWB-40 wall controller (CR2032, about 5 years). RFIO2 communication up to 200 m, works without internet.
Price 63.90 € VAT incl.( 52.81 € VAT excl. )
























