Products catalog

  • Relay for mirror demister pad control | coil 24 V DC | contact 1 NO 10 A / 250 V AC | ELSP-XM-R3

    Code: ELSP-XM-R3

    Compact relay for 24 V DC mirror systems: switches a 230 V heating pad with a 24 V signal from the switch. 1 NO contact: 10 A / 250 V AC (up to 15 A only at 125 V AC). Coil 15 mA / 360 mW, operating temperature −40…+105 °C, compliant with EN 61810-1.

  • Relay for mirror demister pad control | coil 24 V DC | contact 1 NO 10 A / 250 V AC | ELSP-XM-R3

    Relay for 24 V DC mirror systems: switches a 230 V anti-fog heating pad with a signal from a 24 V switch. Contact 1 NO 10 A / 250 V AC, wide operating range 18–31.2 V DC.

    Key point:
    If the mirror lighting and switch work at 24 V, a 12 V relay is not suitable. This 24 V version allows heating to be controlled from the same switch. In a 230 V circuit the limit is 10 A.
    Coil
    24 V DC, 15 mA, 360 mW
    Contact 230 V
    1 NO, 10 A / 250 V AC
    Operating temperature
    −40 … +105 °C
    Dimensions
    30.3 × 22 × 18 mm

    Operating principle

    The coil is connected to the 24 V DC output of the switch; when energised, the NO contact switches on the 230 V pad. Coil operating range 18–31.2 V DC, operate ≤ 10 ms, release ≤ 5 ms.

    Why choose ELSP-XM-R3?
    24 V mirror systems do not need a separate 12 V supply for the relay coil – it is controlled directly from the 24 V switch.

    Technical specifications

    Product type Electromechanical relay with leads
    Product code ELSP-XM-R3
    Coil voltage 24 V DC (18–31.2 V DC)
    Coil current / power 15 mA ±10 % / 360 mW
    Contact 1 NO (SPST-NO, 1 Form A)
    Contact rating 10 A / 250 V AC (rated); 15 A / 125 V AC (max.)
    Contact resistance ≤ 100 mΩ (6 V DC, 1 A)
    Operate / release time ≤ 10 ms / ≤ 5 ms
    Insulation resistance ≥ 100 MΩ (500 V DC)
    Dielectric strength between contacts 750 V AC; coil–contacts 1500 V AC (1 min)
    Lead length 190 ± 20 mm
    Dimensions 30.3 × 22 × 18 mm
    Operating temperature −40 … +105 °C
    Recommended storage +15 … +35 °C, 25–85 % RH
    Standard EN 61810-1:2008

    Key functions

    • 24 V DC control – directly from a 24 V switch.
    • Wide operating range – −40 … +105 °C.
    • Galvanic isolation – 1500 V AC.
    • Fast switching – ≤ 10 ms / ≤ 5 ms.

    Where is it used?

    • 24 V mirror systems with a heating pad
    • Mirrors with long 24 V LED strips
    • Commercial bathrooms

    Use by need

    For mirror manufacturers.
    A heating unit for a 24 V platform.
    For installers.
    No additional 12 V supply needed.
    For designers.
    Wide temperature range.

    Practical example

    A large 1200 × 800 mm mirror with a 24 V LED strip and a 24 V switch: the relay is connected to the switch heating output and switches an 800 × 500 mm pad.

    What else does the mirror kit need?

    For heating control you need:

    Heating pad
    e.g. 800 × 500 mm, 230 V.
    Junction box
    IP44 box.

    Advantages

    • 24 V DC coil
    • 10 A / 250 V AC
    • −40 … +105 °C
    • Fast switching

    Disadvantages / limitations

    • Only 1 NO contact
    • Housing without IP rating – install in a dry place
    • 10 A in a 230 V circuit, not 15 A

    Safety and installation notes

    • Connect with the power off; work by a qualified electrician.
    • 230 V circuit – with a 30 mA residual current device.
    • Do not exceed 10 A at 230 V AC.
    • Make 230 V joints in a sealed box.

    Quick selection guide

    Coil 24 V DC
    1 NO | 10 A / 250 V AC
    −40 … +105 °C
    30.3 × 22 × 18 mm
    Suitable when you need to:
    • 24 V mirror systems;
    • controlling heating from a 24 V switch.
    Check before use:
    • control voltage (24 V DC);
    • humidity at the mounting location.
    Important reminder: 15 A applies only to a 125 V AC network – on a 230 V network count 10 A.

    Frequently asked questions

    Is it suitable for a 12 V system?
    No. For a 12 V system choose the 12 V relay.
    What load at 230 V?
    Up to 10 A resistive load.

    Relay for mirror heating pad | 24 V DC | 1 NO 10 A / 250 V AC | ELSP-XM-R3

    ELSP-XM-R3 – relay for switching a 230 V heating pad with a 24 V DC signal: 1 NO 10 A / 250 V AC, coil 15 mA / 360 mW, −40…+105 °C, EN 61810-1:2008.

    Published: 2026-11-12 · Data verified against the supplier specification: 2026-11-12

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Cable sheath and wire stripper 0.2–4.0 mm² | ErgoStrip KNIPEX
    Code: 169501SB

    KNIPEX high-quality, ergonomically designed wire and cable stripping tool for fast, precise, and safe work. This stripping knife is highly favored by professional electricians for its versatility, durability, and practical design. Suitable for removing insulation from both signal and power wires, as well as for installation, data, and coaxial cables.

    Perfectly suited for use on construction sites and in domestic installations, especially where wires need to be quickly and accurately prepared for connection in confined spaces. 

    Price 48.40 € VAT incl.
    ( 40.00 € VAT excl. )
    Smart lighting controller | dimmer | 150W LED / 200W | 100-240V | Wi-Fi | RF 433MHz | SONOFF | D1
    Code: SONOFF-D1

    SONOFF D1 is a smart Wi-Fi and RF 433 MHz lighting dimmer for dimmable LED lamps up to 150 W and incandescent lamps up to 200 W. Controlled with the eWeLink app, the RM433 remote and by voice. Installed in an EU / 86-type box.

    Price 17.40 € VAT incl.
    ( 14.38 € VAT excl. )
    Flexible copper cable H05VV-F | 3G1.5 mm² | 300/500 V | round | white | 1 m | Lietkabelis
    Code: 92331501

    H05VV-F 3G1.5 mm² – AB Lietkabelis flexible round copper cable with class 5 conductors, PVC insulation and a white PVC sheath, 300/500 V. Sold by the metre.

    Cores: L, N, PE. Indicative current ≈ 16 A – for household appliances indoors.

    Price 1.04 € VAT incl.
    ( 0.86 € VAT excl. )
    Sealing protective mastic tape | 25x1x500mm | for sealing cable mechanical damage area | S1052-1-500
    Code: S 1052-1-500

    Specialized self-fusing sealing tape designed for protecting and sealing damaged areas on cables. Made from black thermoplastic, highly flowable mastic, this tape effectively shields cable insulation damage from moisture, corrosion, and dust. Used for emergency or preventive repair of electrical, telecommunication, and signal cables, especially suitable for outdoor and damp environments.

    Price 7.87 € VAT incl.
    ( 6.50 € VAT excl. )
    Wireless control kit | actuator RFSA-61B and wall controller RFWB-40 | 866-916MHz | 230VAC | iNELS RF | RFSET-SW-F1
    Code: RFSET-SW-F1

    iNELS RF RFSET-SW-F1 is a wireless control kit: RFSA-61B actuator (230 V AC, 1 changeover contact 16 A AC1, 6 functions) and RFWB-40 wall controller (CR2032, about 5 years). RFIO2 communication up to 200 m, works without internet.

    Price 63.90 € VAT incl.
    ( 52.81 € VAT excl. )
  • Subscribtion to new arrivals

    privacy policy

    Information