Wireless crane remote control | 2 joysticks | 5 speeds | receiver 12 V AC/DC | 15 A relays | EL-F24-60-12

Wireless joystick crane remote EL-F24-60-12 – 12 V AC/DC receiver

EL-F24-60-12 is an F24-60 type industrial radio remote with a belly-box transmitter and two joysticks for cranes, hoists and other lifting machinery. The transmitter sends commands by radio to the receiver, whose relays switch the contactor coils or the control inputs of a variable frequency drive. This is the version with a 12 V AC/DC receiver for machines with a 12 V control circuit.

• 2 joysticks – several crane motions controlled at the same time
• 5 speed steps – smooth start and accurate load placement with a VFD
• Mushroom emergency STOP – drops the MAIN relay and the main contactor
• Key switch – unauthorised persons cannot use the remote
• START button – the system is switched on only by a deliberate action
• Function buttons and toggle switches – for auxiliary functions, e.g. horn or lighting
• 12 V AC/DC receiver – connects directly to a control circuit of that voltage

• EL-F24-60-24 – 24 V AC/DC receiver – choose for a 24 V control circuit
• EL-F24-60-48 – 24–48 V AC/DC receiver – choose for a 24–48 V control circuit, e.g. 36 or 48 V AC
• EL-F24-60 – receiver versions within 12–440 V AC/DC – choose for 110–400 V AC or other control voltages
• ES-D1 – 4 proportional levers, 12/24 V DC, up to 500 m – choose when proportional control for hydraulics or a longer range is needed

• Overhead and gantry cranes with several motions
• Hoists with VFD-controlled travel
• Production halls and steel warehouses
• Lifting machinery on construction sites
• Winches and special lifting equipment
• Battery-powered and mobile equipment with 12 V control

• Receiver relays switch only contactor coils and control inputs – motor current must never pass through them
• The MAIN relay must drop the main contactor KM0; at commissioning check that STOP and loss of radio link stop the crane (EN 60204-32)
• Limit switches (SQ) and the NC interlock between opposite directions stay in the circuit
• Speed-step relays are wired to the multi-speed inputs of the VFD; speeds are set in the drive
• The receiver supply voltage must match the control circuit: 12 V AC/DC
• Before installation or repair switch off the main isolator and apply LOTO

Quick selection guide

Check before ordering:

• Are the contactor coils and control circuit 12 V AC/DC?
• Check whether the frequency is allowed in your country: 315 MHz is not a standard SRD band in the EU, 433 MHz is.
• How many motions and speeds are needed, and does the drive have a VFD for the 5 steps?

EL-F24-60-12 in brief

EL-F24-60-12 is an F24-60 joystick radio remote with 2 joysticks, 5 speed steps and a 12 V AC/DC receiver. Choose it when the contactor coils and control circuit are 12 V AC or DC.