
Industrial socket board | 2×CEE 32 A 5P + 2×SCHUKO | 9 modules | without protection | IP44 | Famatel RW3958 | 3958.0052
Code: 3958.6 0052EPrice 82.58 € VAT incl.( 68.25 € VAT excl. )Famatel RW3958 3958.0052 is a wall-mounted industrial board with two CEE 32 A 5P (400 V) and two SCHUKO 16 A 230 V sockets and space for 9 modules of protective devices.
- Sockets: 2×CEE 32 A 5P + 2×SCHUKO
- Space for devices: 9 modules
- IP rating: IP44
- Dimensions: 330 × 215 × 150 mm
-
Industrial socket board | 2×CEE 32 A 5P + 2×SCHUKO | 9 modules | without protection | IP44 | Famatel RW3958 | 3958.0052
Famatel RW3958 3958.0052 is a wall-mounted industrial board with two CEE 32 A 5P (400 V) and two SCHUKO 16 A 230 V sockets and space for 9 modules of protective devices. The sockets are installed and wired; the breakers and RCD are selected by the electrician for the specific installation.
Key idea:
The board is supplied without protective devices – a flexible solution when protection has to match the supply line and the connected equipment. Two CEE 32 A sockets are intended for powerful equipment such as welders or vehicle lifts.Sockets
2×CEE 32 A 5P + 2×SCHUKOSpace for devices
9 modulesIP rating
IP44Dimensions
330 × 215 × 150 mmHow it works
The board is wall-mounted; the supply cable enters through a gland and is connected to the incoming devices installed by the electrician on the DIN rail.
Each socket or socket group is connected via its own circuit breaker, and the whole socket group via an RCD ≤ 30 mA.
The result is a fixed distribution point where three-phase and single-phase equipment is connected to protected sockets in one place.
Why choose Famatel 3958.0052?
You choose the protection concept yourself: one common 4P RCD or separate RCBOs for each group if a leakage on one circuit must not switch off the others.Technical specifications
Product type Wall-mounted board with socket outlets, without protective devices Manufacturer / code Famatel Polska / 3958.0052 (RW3958 series) Socket outlets Two CEE 32 A 5P (400 V) and two SCHUKO 16 A 230 V sockets Protective devices None – space for 9 modules Protection rating IP44 Dimensions 330 × 215 × 150 mm (H × W × D) Mounting Wall-mounted Enclosure material Thermoplastic, grey Barcode (EAN) – Key functions
- Sockets installed and wired – only protection needs to be added.
- 9-module space – fits a 4P RCD (4 modules) and breakers for the sockets.
- Three-phase CEE 5P sockets – for industrial equipment with locking plugs.
- Two SCHUKO 230 V sockets – for everyday tools and appliances.
- IP44 – for indoor rooms and covered outdoor areas.
Where is it used?
- Car service workshops with lifts
- Metalworking workshops
- Welding workstations
- Halls and warehouses
- Agricultural machinery
- Production line connections
Use by need
For installers.
A wired enclosure with sockets; protection is selected according to the supply line and equipment.For service or workshop owners.
One fixed point for three-phase and single-phase equipment at the workstation.For building maintenance.
A standard solution for technological sockets in halls and warehouses.Practical application
If two 32 A machines operate in a service workshop, the board is supplied by a line sized for the actual simultaneous load (e.g. C40–C50 with a matching cable), and each socket is protected by a C32 3P breaker and a 30 mA RCD.Advantages
- Sockets installed and wired
- 9 modules for protection – fits a 4P RCD
- Flexible protection concept
- Compact enclosure 330 × 215 × 150 mm
- Good price-to-function ratio
Limitations
- No CEE 16 A socket – smaller three-phase equipment needs a 32→16 A solution or another model
- Without protection – assembly and test measurements required
- IP44 – not for wash-down areas
- Not a mobile unit – no inlet plug
Safety and installation notes
- The board is supplied without protective devices – before energising, install circuit breakers for each socket group and an RCD ≤ 30 mA (HD 60364-4-41), or provide this protection in the supplying board.
- Select the supply cable according to the supply protection, not the sum of socket ratings; the cable is protected by the breaker in the upstream board.
- The phase sequence of all three-phase CEE sockets must be the same (L1-L2-L3 clockwise) – otherwise the motor will run in reverse.
- N and PE conductors are connected to separate busbars; do not bridge them in the board.
- The cable must enter through a gland of the correct size; an unsealed entry voids the declared IP rating.
- Connection and commissioning tests (PE continuity, insulation resistance, Zs, RCD tripping) must be carried out by a qualified electrician.
Quick selection guide
2×CEE 32 A 5P2×SCHUKO9 modulesIP44without protectionSuitable when you need:- A fixed socket point with your own selected protection
- Three-phase and single-phase equipment connected in one place
- A garage, workshop or production workstation
Check before use:- Which protective devices will be installed and whether they fit into 9 modules
- Whether the supply cable matches the supply protection
- Whether the phase sequence of the three-phase sockets is the same
Important reminder: a board without protection is not ready for use – it must not be energised without breakers and a 30 mA RCD.FAQ
Are breakers installed in the board?
No – this version is supplied without protection, with space for 9 modules.Is an RCD mandatory?
Yes – sockets up to 32 A used by ordinary persons must be protected by an RCD with IΔn ≤ 30 mA (HD 60364-4-41).How many modules will the protection occupy?
For example, a 4P RCD – 4 modules, a 3P breaker – 3, a 1P breaker – 1 module.How does the 3958 series differ from 3957?
The 3958 has a larger enclosure (330 mm high) and more CEE socket options.Which supply cable should be used?
According to the supply protection: 25 A – usually 5×4 mm², 32 A – 5×6 mm² Cu; the exact size by calculation.Can it be used outdoors?
Under a canopy – yes (IP44); for direct rain or wash-down choose a higher IP rating.Industrial socket board | 2×CEE 32 A 5P + 2×SCHUKO | 9 modules | without protection | IP44 | Famatel RW3958 | 3958.0052
Famatel RW3958 3958.0052 – a 9-module wall board with two CEE 32 A 5P (400 V) and two SCHUKO 16 A 230 V sockets, without protection, IP44, 330 × 215 × 150 mm. A flexible solution for garages, workshops and production halls when protection is selected by the electrician.
Published: 2026-10-30 · Data verified against supplier specification: 2026-10-30
Published: 2026-11-15 · Data verified against the manufacturer / supplier specification: 2026-11-15
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.ManufacturerThe IP protection class indicates the device's resistance to environmental factors.

The first digit indicates protection against dust and solid objects.
The second digit indicates protection against moisture.First digit values:
X — Untested;
0 — No protection;
1 — Protected against solid objects larger than 50 mm;
2 — Protected against solid objects larger than 12.5 mm;
3 — Protected against solid objects larger than 1 mm;
4 — Protected against solid objects larger than 1 mm;
5 — Dust protected;
6 — Totally dustproof.
Second digit values:X — Untested;
0 — No protection;
1 — Protected against vertically falling water drops;
2 — Protected against water drops falling at a 15º angle;
3 — Protected against rain falling at a 60º angle;
4 — Protected against water splashes;
5 — Protected against water jets;
6 — Protected against large amounts of water;
7 — Protected against short-term immersion in water up to 1 meter deep;
8 — Protected against long-term immersion in water up to 3 meters deep.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Single-cable membrane entry flange | for Ø86 mm hole | cable Ø55–70 mm | flange Ø123.1 mm | grey | IP67 | HT Hi Tech Polymers | HTX-1Code: Sandariklis HTX-1HTX-1 is a membrane entry flange for one thick power cable Ø55–70 mm. It fits a round Ø86 mm hole in the enclosure wall, flange diameter Ø123.1 mm. Sealing rating is IP67 according to the latest manufacturer's sheet.
Price 21.78 € VAT incl.( 18.00 € VAT excl. )Wire connector | universal electrical terminal | 5x0.2–4mm² | for all conductor types | WAGO | 221-415 | 4055143234658Code: WAGO 221-415WAGO 221-415 is a universal 5-conductor wire connector designed for fast and reliable connection of different conductor types. It is suitable for 0.2–4 mm² conductors, including solid, stranded and flexible wires. The transparent housing and lever design make wire insertion, inspection and reconnection easy.
Price 0.57 € VAT incl.( 0.47 € VAT excl. )Terminal | connector paste for contacts | reduces oxidation | 35.3g | WAGO | ALU PLUS | 249-130 | for connecting aluminium and copper wiresCode: 4017332133890Contact paste designed to protect aluminum conductors from oxidation and ensure a reliable electrical connection. This special paste allows aluminum and copper conductors to be safely and efficiently connected within the same connector, making it particularly useful when renovating older electrical installations where aluminum wiring is commonly found.
Aluminum naturally oxidizes, and the resulting oxide layer increases contact resistance, causes connection heating, and may become a source of electrical faults. By using WAGO ALU-PLUS, the oxidation layer is reduced, electrical conductivity is improved, and the service life of the connection is significantly extended.
Price 2.83 € VAT incl.( 2.34 € VAT excl. )Cable gland with locknut and gasket | PG7 | for cable Ø3–6.5 mm | grey | IP68 | 4772124000810Code: 00810Plastic PG7 cable gland with locknut and gasket for routing Ø3–6.5 mm round cables into distribution boards and junction boxes. Provides IP68 sealing when correctly installed.
Price 0.20 € VAT incl.( 0.17 € VAT excl. )















