Products catalog

Home/Product Catalog/Automation and Control Systems/Automation control accessories/Energy meters/Three-phase electricity meters | energy metering devices
  • New item   Modular three-phase electricity meter | 5(100) A | 3×230/400 V | 1 tariff | pulse output | IP20 | DIN | THORGEON 01003

    Modular three-phase electricity meter | 5(100) A | 3×230/400 V | 1 tariff | pulse output | IP20 | DIN | THORGEON 01003

    Code: 01003
    Inquire about this item
    Price 45.22 € VAT incl.
    ( 37.38 € VAT excl. )
    Want another price? Suggest yours!

    Direct-connected three-phase electronic meter up to 100 A, no current transformers needed. Records active energy (kWh), has an electrical 400 imp/kWh output and fits 4 DIN modules. Intended for non-billing (internal) metering.

  • Product description

    Modular three-phase electricity meter | 5(100) A | 3×230/400 V | 1 tariff | pulse output | IP20 | DIN | THORGEON 01003

    THORGEON 01003 is a modular three-phase electronic meter connected directly into the circuit up to 100 A. It records active energy of a separate line, building or machine and mounts on a DIN rail in the distribution board.

    Key point:
    100 A maximum current without current transformers means a simpler board and fewer connections. Where you need to know how much a workshop, heat pump or tenant consumes, this meter gives a clear kWh reading plus a pulse signal for further accounting. It is not suitable for billing – the manufacturer does not state MID approval.
    Max. current
    100 A
    Voltage
    3×230/400 V
    Accuracy class
    B
    Width
    4 modules
    ℹ
    Bidirectional metering
    The manufacturer does not state that the meter records imported and exported energy separately. If energy exported to the grid must be metered separately, choose a clearly bidirectional model, e.g. EL-TVPS3-80T.

    Communication interfaces and integration

    Electrical pulse output (400 imp/kWh)
    Sends pulses to an external counter, PLC, data logger or BMS pulse input – consumption can be totalised remotely without a digital bus.
    Local LCD display
    Readings are taken at the board. This model has no RS485, M-Bus or Wi-Fi interface.

    How it works

    The meter mounts on a 35 mm DIN rail; the three phases and neutral are connected directly – no current transformers are needed up to 100 A.

    The electronic measuring circuit continuously records active energy on all three phases, with each kWh corresponding to 400 pulses at the output.

    The LCD shows the accumulated kWh value, and the pulse signal can be passed to an automation or metering system.

    Why choose the THORGEON 01003?
    It is a simple, compact solution for internal three-phase metering where current can reach 100 A. No CTs, extra terminal blocks or programming – install, connect and you have a kWh reading and a pulse signal.

    Technical specifications

    Product type Modular three-phase electronic electricity meter
    Manufacturer / model THORGEON 01003
    Connection Direct (no current transformers)
    Base / maximum current 5 A / 100 A
    Rated voltage 3×230/400 V (230 V phase–N)
    Frequency 50–60 Hz
    Accuracy class B
    MID No – for non-billing (internal) metering
    Tariffs 1 (internal control)
    Measured quantities Active energy (kWh)
    Pulse output Electrical, 400 imp/kWh
    Display Digital LCD
    Built-in battery Yes
    Mounting DIN rail, 4 modules
    Dimensions (W×H×D) 76 × 100 × 65 mm
    Weight 392 g
    Degree of protection IP20
    Warranty 24 months

    Main functions

    • Direct connection up to 100 A – no current transformers to buy or install
    • Active energy metering – clear accumulated kWh reading
    • 400 imp/kWh pulse output – signal to PLC, BMS or logger
    • LCD display – readings visible without extra tools
    • Built-in battery – part of the manufacturer's design
    • 4-module housing – fits a standard DIN enclosure

    How does it differ from similar models?

    THORGEON 01002 Same series, up to 80 A; the 01003 allows up to 100 A maximum current.
    THORGEON 01006 80 A with manufacturer-stated MID and 800 imp/kWh; the 01003 has no MID but goes up to 100 A.
    THORGEON 01007 80 A, 2 tariffs, RS485 Modbus and MID; the 01003 has no digital interface, only a pulse output.
    Eastron SDM630-MT 100 A, 4 tariffs, RS485 Modbus, MID and multifunction measurement – a higher-end option; the 01003 is for plain kWh metering.

    Where is it used?

    • Internal metering of a workshop or production line
    • Metering of rented premises or a warehouse
    • Monitoring a heat pump, boiler or compressor
    • EV charger circuit metering
    • Three-phase lines in farm buildings
    • Construction site distribution boards

    Use by need

    Electricians.
    Fast direct installation up to 100 A with no CTs or programming.
    Facility managers.
    Internal allocation of consumption between zones or tenants in kWh.
    Automation integrators.
    400 imp/kWh signal to a PLC or BMS pulse input.

    Practical use

    If a workshop has machines fed via 3×63 A and you want to know their monthly consumption, install the THORGEON 01003 in their line after the incoming breaker and connect the pulse output to the existing PLC – consumption is visible both on the display and in the system.

    Pros

    • Direct connection up to 100 A
    • Compact 4-module housing
    • 400 imp/kWh pulse output
    • Simple to use, no programming
    • 24-month manufacturer warranty

    Cons / limitations

    • No MID – not for billing (choose THORGEON 01006 or 01007)
    • No RS485 / Wi-Fi interface (for remote reading – THORGEON 01007 or 01011)
    • Single tariff
    • Bidirectional metering not stated by the manufacturer

    Safety and installation notes

    • Installation by a qualified electrician only, with the supply disconnected
    • An upstream circuit breaker is mandatory, sized to the cable and not exceeding the meter's 100 A limit
    • Choose conductor cross-section and tightening torque per the manual and the load
    • IP20 – install only in a closed enclosure in a dry room
    • Follow the phase and neutral wiring diagram shown on the housing

    Quick selection guide

    Direct up to 100 A
    3×230/400 V
    1 tariff, no MID
    400 imp/kWh
    A good fit when you need:
    • Internal three-phase metering up to 100 A
    • A pulse signal to automation
    • A compact DIN board solution
    Check before use:
    • That MID is not required (billing third parties)
    • That maximum line current does not exceed 100 A
    • That your PLC / logger accepts a 400 imp/kWh signal
    Important reminder: This meter does not replace the grid operator's billing meter, and the manufacturer does not state separate import and export metering.

    FAQ

    Are current transformers needed?
    No, the 01003 connects directly up to 100 A.
    Is the meter MID approved?
    The manufacturer does not state MID, so it is for internal metering.
    How many pulses per kWh?
    400 imp/kWh.
    Can it be read remotely?
    Only via the pulse output; there is no RS485 or Wi-Fi.
    How much space does it take?
    4 DIN modules (76 mm).
    What is the warranty?
    The manufacturer specifies a 24-month warranty.

    THORGEON 01003 three-phase meter 100 A

    Direct-connected three-phase electricity meter 5(100) A, 3×230/400 V, class B, 400 imp/kWh, 4 DIN modules – for internal kWh metering.

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.

  • Alternative products

  • Subscribtion to new arrivals

    privacy policy

    Information