Touch LED mirror controller | dimmer, CCT and anti-fog heating control | 12 V DC | 5 A | 60 W | ES-HYKDK-0812
Code: ES-HYKDK-0812Price 4.54 € VAT incl.( 3.75 € VAT excl. )The touch LED mirror controller ES-HYKDK-0812 is mounted behind the mirror: switches the light on and off, adjusts brightness, changes colour temperature (CCT) and controls the anti-fog heater. 12 V DC, 60 W, controlled through 1–7 mm glass.
-
Touch LED mirror controller | dimmer, CCT and anti-fog heating control | 12 V DC | 5 A | 60 W | ES-HYKDK-0812
The touch LED mirror controller ES-HYKDK-0812 is mounted behind a mirror or furniture surface and connected between the LED power supply and the LED strip. It switches the light on and off, adjusts brightness, changes colour temperature (CCT) and controls the anti-fog heater and is controlled through 1–7 mm glass. Designed for 12 V DC systems only, load – 5 A · 60 W.
Key point:
One touch controller handles the whole mirror: switches the light, adjusts brightness, changes the CCT tint and turns on the anti-fog heater. One of the best price-to-function ratios in the group.Voltage
12 V DCLoad
60 WControl
touchSensing
through 1–7 mm glassOperating principle
The capacitive sensor works through 1–7 mm glass. Touch switches the light on, adjusts brightness smoothly and changes colour temperature (with single-colour or CCT strip); a separate function turns on the anti-fog heater.
The input (IN) is connected to the 12 V DC LED power supply, the output (OUT) to the LED strip (in CCT models – warm and cool white channels). 230 V is never connected to the switch – it always works on the low-voltage side.
The 230 V heating pad is connected to the controller heating output according to the supplier diagram – via a relay if required. It must never be connected directly to the 12/24 V output.
Why choose the ES-HYKDK-0812?
Light, brightness, CCT and heating – with one affordable controller.Technical specifications
Product type Touch LED mirror controller for LED lighting, mounted behind the mirror Product code ES-HYKDK-0812 Supply voltage 12 V DC Maximum current 5 A Maximum load 60 W Control touch Sensing distance (glass thickness) 1–7 mm Dimming yes CCT (colour temperature) yes Anti-fog heating control function (per supplier diagram) Backlight white + blue LED indication Housing ABS Mounting holder behind the mirror Key functions
- Hidden installation – the switch is invisible, no button needed in the mirror.
- Dimming – brightness is adjusted smoothly.
- CCT – from warm to cool white with a CCT strip.
- Anti-fog heating – separate control for the mirror heating pad.
- Backlight – easy to find the control point in the dark.
- Low voltage – 12 V DC – for 12 V DC systems only.
Where is it used?
- LED bathroom mirrors
- Mirror bathroom cabinets
- Hotel and apartment bathrooms
- Mirrors with CCT strip and anti-fog heating
Use by need
For mirror manufacturers.
The same hidden control for the whole series, no holes in the glass.For installers.
Simple wiring between the power supply and the strip, compact housing.For home renovation.
An existing LED mirror can be upgraded with modern control.Practical example
A mirror with 5 m of 12 V LED strip at 9.6 W/m (48 W, about 4 A). At 12 V the ES-HYKDK-0812 works at about 80 % of its 60 W limit. Power supply – at least 60 W (load + 20 %).What else does the mirror kit need?
Most often used together with:
LED power supply
12 V – with ~20 % power reserve.LED strip
LED strips – a CCT (dual-channel) strip to change the tint.Advantages
- Hidden installation
- No mechanical parts to wear out
- Dimming
- CCT control
- Anti-fog heating control
Disadvantages / limitations
- 12 V DC only – not for 24 V systems
- DC only – never connect to 230 V
Safety and installation notes
- Connect only with the power off; the 230 V part is connected by a qualified electrician.
- The voltage of the switch, LED strip and power supply must match.
- Do not exceed the 60 W load – leave ~20 % reserve.
- Bathroom circuit – with a 30 mA RCD (HD 60364-7-701).
- The 230 V heating pad is connected only via a relay or a dedicated output, never to the 12/24 V output.
Quick selection guide
12 V DC60 WtouchDimmerSuitable when you need to:- control LED mirror lighting through 1–7 mm glass;
- adjust light brightness;
- change the light tint with a CCT strip;
- switch on the anti-fog heater (via a relay or controller output);
Check before use:- system voltage: the model is designed for 12 V DC systems only;
- total LED strip power (limit 60 W);
- surface thickness and material (not metal);
Important reminder: The switch is connected only on the low-voltage (DC) side, between the power supply and the LED strip.Frequently asked questions
Will it work through my mirror?
The touch sensor works through glass without a window. This model senses through 1–7 mm glass; test thicker or double glass before mounting.How many metres of LED strip can be connected?
At 12 V – about 5 m of 9.6 W/m strip with reserve (48 W).Can it control the anti-fog heater?
Yes, but the 230 V pad is connected via a relay or the controller heating output according to the diagram. Heating pads are here.Touch LED mirror controller | dimmer, CCT and anti-fog heating control | 12 V DC | 5 A | 60 W | ES-HYKDK-0812
ES-HYKDK-0812 – touch LED mirror controller for LED mirrors and furniture: switches the light on and off, adjusts brightness, changes colour temperature (CCT) and controls the anti-fog heater, 12 V DC, 60 W. Mounted behind the mirror, connected between the power supply and the LED strip.
Published: 2026-11-12 · Data verified against the supplier specification: 2026-11-12
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Flexible copper cable H05VV-F | 3G1.5 mm² | 300/500 V | round | white | 1 m | LietkabelisCode: 92331501H05VV-F 3G1.5 mm² – AB Lietkabelis flexible round copper cable with class 5 conductors, PVC insulation and a white PVC sheath, 300/500 V. Sold by the metre.
Cores: L, N, PE. Indicative current ≈ 16 A – for household appliances indoors.
Price 1.04 € VAT incl.( 0.86 € VAT excl. )Sealing protective mastic tape | 25x1x500mm | for sealing cable mechanical damage area | S1052-1-500Code: S 1052-1-500Specialized self-fusing sealing tape designed for protecting and sealing damaged areas on cables. Made from black thermoplastic, highly flowable mastic, this tape effectively shields cable insulation damage from moisture, corrosion, and dust. Used for emergency or preventive repair of electrical, telecommunication, and signal cables, especially suitable for outdoor and damp environments.
Price 7.87 € VAT incl.( 6.50 € VAT excl. )Cable sheath and wire stripper 0.2–4.0 mm² | ErgoStrip KNIPEXCode: 169501SBKNIPEX high-quality, ergonomically designed wire and cable stripping tool for fast, precise, and safe work. This stripping knife is highly favored by professional electricians for its versatility, durability, and practical design. Suitable for removing insulation from both signal and power wires, as well as for installation, data, and coaxial cables.
Perfectly suited for use on construction sites and in domestic installations, especially where wires need to be quickly and accurately prepared for connection in confined spaces.
Price 48.40 € VAT incl.( 40.00 € VAT excl. )Smart lighting controller | dimmer | 150W LED / 200W | 100-240V | Wi-Fi | RF 433MHz | SONOFF | D1Code: SONOFF-D1SONOFF D1 is a smart Wi-Fi and RF 433 MHz lighting dimmer for dimmable LED lamps up to 150 W and incandescent lamps up to 200 W. Controlled with the eWeLink app, the RM433 remote and by voice. Installed in an EU / 86-type box.
Price 17.40 € VAT incl.( 14.38 € VAT excl. )Wireless control kit | actuator RFSA-61B and wall controller RFWB-40 | 866-916MHz | 230VAC | iNELS RF | RFSET-SW-F1Code: RFSET-SW-F1iNELS RF RFSET-SW-F1 is a wireless control kit: RFSA-61B actuator (230 V AC, 1 changeover contact 16 A AC1, 6 functions) and RFWB-40 wall controller (CR2032, about 5 years). RFIO2 communication up to 200 m, works without internet.
Price 63.90 € VAT incl.( 52.81 € VAT excl. )




























