Products catalog

  • Multifunction power network analyzer | with Rogowski sensor support | 3.5" IPS | Modbus TCP / RS485 | ME537

    Code: ESME537

    A multifunctional power network analyzer designed for measuring and analyzing current, voltage, power, energy, and power quality. The device operates with external current sensors – Rogowski coils (333 mV) or current clamps – allowing flexible application from hundreds to several thousand amperes. Thanks to the 3.5-inch IPS display, event logging, waveform visualization, and Modbus communication, the analyzer becomes a central solution for energy monitoring and power quality control in industrial, commercial, and energy projects.

    Current sensors (Rogowski coils or current clamps) are not included in the package and must be selected separately according to measurement requirements. 

  • Technical Specifications

    Type: Multifunctional power network analyzer (panel-mounted)
    Model: ME537
    Display: 3.5" color IPS
    Power supply: 85–305 VAC; 100–430 VDC
    Network frequency: 50 Hz
    Memory: 32 GB TF card
    Data transfer: USB (U-disk mode)
    Communication: Ethernet – Modbus TCP; RS485 – Modbus RTU
    Current sensor support: Rogowski coils 333 mV; current clamps ST08 (10 A / 320 mV)
    Voltage connection: via VT up to 500 kV
    Installation: panel-mounted (on electrical cabinet door)
    Recommended current sensors:
    100 A – MRC-16; 300 A – MRC-24; 600 A – VRC-36; 1000 A – NRC-XL-100;
    3000 A – NRC-XL-150; 6000 A – NRC-XL-200

    Functions

    Current, voltage, power and energy measurement – real-time and accumulated values monitoring
    Power quality analysis – assessment of grid stability and load conditions
    Harmonics, imbalance, sag / swell – detection of power disturbances
    Waveform visualization – current and voltage signal display
    Event logging and data storage – recording of historical events
    Modbus TCP / RS485 communication – integration with BMS, SCADA, PLC
    Rogowski coil support – safe measurement of high currents

    Applications

    For engineers / energy specialists: Enables analysis of power quality, harmonics, imbalance and loads; suitable for energy audits, industrial projects and fault analysis.
    For electricians / system integrators: Panel mounting, Modbus TCP / RS485 communication and wide sensor support allow easy integration into BMS, SCADA or PLC systems.
    For building managers and advanced users: Ideal solution for commercial buildings, production facilities and solar power plants where monitoring of both energy consumption and power quality is required.

    Advantages

    Wide range of measurement functions in a single device
    Rogowski coil support for safe high-current measurements
    Large 32 GB internal memory
    Modbus TCP and RS485 communication
    Clear IPS display with waveform visualization

    Disadvantages

    Current sensors are not included
    Designed for professional use (overkill for simple household measurements)
    Correct selection of Rogowski coils or current clamps is required 

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    TDS (dissolved solids) sensor | 0…1000 ppm | 0…2.3 V | 5 V DC | analog input | for D105 pulse analyzer | smart-MAIC | TDS Level
    Code: TDS Level

    TDS sensor for measuring dissolved salt concentration and assessing water hardness. It connects to the analog input of the smart-MAIC D105 and is powered from its 5 V terminal. It helps you see in time when filter cartridges need replacing.

    Price 52.27 € VAT incl.
    ( 43.20 € VAT excl. )
    Wind direction sensor | 0–360°, 16 directions of 22.5° | 12–24 V DC | RS485 Modbus RTU | for D105 pulse analyzer | smart-MAIC | T5W
    Code: T5W

    The T5W wind vane sensor detects wind direction in 16 sectors of 22.5° (value 0–15, 0 = north). It connects to the RS485 input of the smart-MAIC D105 via Modbus RTU. 12–24 V DC supply is not included.

    Price 174.05 € VAT incl.
    ( 143.84 € VAT excl. )
    Water flow sensor | up to 30 l/min | ~450 pulses/l | G1/2" (DN15) | 5 V DC | pulse input | for D105 pulse analyzer | smart-MAIC | DN15(G1/2")
    Code: DN15(G1/2")

    A turbine water flow sensor with G1/2" (DN15) connections for flows up to 30 l/min. It connects to a pulse input of the smart-MAIC D105 and gives about 450 pulses per litre. No separate supply is needed – the D105 provides 5 V.

    Price 38.53 € VAT incl.
    ( 31.84 € VAT excl. )
    CYKY-L 5G10 | 5×10 mm² | Copper power cable | 450/750 V | black | 1 m | Lietkabelis
    Code: 91951013

    CYKY-L 5G10 (5×10 mm²) – 450/750 V copper power cable for three-phase 400 V circuits with neutral. Solid cores, PVC insulation and sheath, suitable indoors, outdoors and in the ground. AB Lietkabelis, price per 1 m.

    Price 8.67 € VAT incl.
    ( 7.17 € VAT excl. )
    pH level sensor | pH 0…14 | 5 V DC | 80 cm cable | analog input | for D105 pulse analyzer | smart-MAIC | pH Level
    Code: pH Level

    Submersible pH sensor for measuring water acidity in pools, aquariums and water treatment systems. It connects to the analog input of the smart-MAIC D105 and is powered from its 5 V terminal. Range pH 0…14, accuracy 0.2 pH.

    Price 57.89 € VAT incl.
    ( 47.84 € VAT excl. )
  • privacy policy

    Information