Portable Rogowski multifunction energy and power analyzer | with data logging | 5VDC / 2900mAh battery | THD | SD card | ME440

Portable Rogowski multifunction power and energy analyzer – up to 6000A, THD, 32 GB memory, Modbus TCP, 2900 mAh battery

Portable multifunction power and energy analyzer designed for detailed analysis of electrical networks, loads, energy consumption and power quality under real operating conditions. The device supports Rogowski coils, 333 mV CT transformers and current clamps, allowing safe measurement of high currents up to 6000A without interrupting electrical circuits. The integrated battery, 32 GB memory, harmonic analysis up to the 51st harmonic and Modbus TCP communication make the analyzer suitable for energy audits, fault diagnostics, commissioning and adjustment work.

• Voltage and current measurement – real-time monitoring of electrical network parameters.
• Power and energy metering – calculation of active power, reactive power and energy consumption.
• Harmonic analysis – THD and harmonic spectrum evaluation up to the 51st harmonic.
• Power factor analysis – evaluation of cos φ and load efficiency.
• Frequency monitoring – network frequency control under real operating conditions.
• Phase balance evaluation – detection of phase loads and voltage imbalance.
• Data logging – accumulation of measurement data in the internal 32 GB memory.
• Data export via USB – simpler measurement analysis on a computer.
• Modbus TCP – integration with BMS, SCADA or other automation systems.
• Autonomous operation – measurements are performed using the integrated battery.

• In energy audits – for evaluating energy consumption, loads and power quality.
• In manufacturing companies – for analyzing transformers, busbars, motors, compressors and production lines.
• In commercial facilities – for monitoring electrical networks in offices, shopping centres, warehouses and technical rooms.
• In electrical distribution boards – for diagnostics of current, voltage, phase balance and harmonics.
• In solar power plants – for analyzing inverters, network parameters and loads.
• In generator and UPS systems – for evaluating power quality, frequency and load.
• In commissioning and adjustment work – for testing new electrical systems and checking parameters.

For example, when performing an energy audit of a production line, Rogowski coils are placed around the main phase conductors, and the voltage clips are connected to the measured network. The analyzer records current, voltage, active and reactive power, energy consumption, harmonics and power factor.

The collected data is saved in the internal memory and transferred via USB to a computer for further analysis. This makes it possible to identify overloads, uneven phase loading, high harmonic distortion, inefficient energy use or possible electrical equipment faults.

For an engineer / energy specialist: suitable for energy and power quality audits, harmonic distortion analysis, phase imbalance evaluation, identifying fault causes and long-term parameter logging.

For industrial and commercial facility specialists: allows periodic equipment checks, monitoring transformers, lines and loads, evaluating energy consumption and identifying possible network quality disturbances.

For an electrician: a practical tool for quick on-site diagnostics, load checking, electrical cabinet measurements, commissioning and testing work.

For a designer and automation specialist: Modbus TCP communication allows the analyzer to be integrated into BMS, SCADA or other energy monitoring infrastructure.

This device is intended for professional electrical measurement. When working with live electrical networks, especially industrial panels, high currents or high-voltage systems, all electrical safety requirements must be followed.

• Measurements must be carried out by a qualified electrical specialist.
• Before connecting voltage clips, the network voltage and measurement safety must be evaluated.
• Rogowski coils, CT transformers and current clamps must be selected according to the expected current.
• The measurement limits of the selected current sensor and analyzer must not be exceeded.
• For voltage measurement up to 500 kV, suitable VT transformers and a safe measurement circuit must be used.
• Before performing data analysis, the phase connection sequence must be checked so that power and energy calculations are correct.
• The device and sensors must be protected from mechanical damage, moisture and improper storage.

Quick selection guide

Choose the portable Rogowski power and energy analyzer when a mobile device is needed for professional evaluation of electrical networks, loads, energy consumption and power quality. It is especially suitable for measuring high currents using Rogowski coils up to 6000A.

Professional portable energy and power analyzer for high currents

The portable multifunction Rogowski power and energy analyzer is a universal tool for energy audits, fault diagnostics, power quality evaluation, commissioning and adjustment work, and long-term parameter logging on site.

Thanks to support for Rogowski coils up to 6000A, 32 GB memory, THD and harmonic analysis up to the 51st harmonic, 2900 mAh battery, USB data export and Modbus TCP communication, this analyzer is suitable for engineers, energy specialists, electricians, industrial companies and advanced electrical monitoring projects.