Products catalog

  • Portable Rogowski power and power quality analyzer | with data logging | 3.5" IPS display | 12 V DC | MQ41

    Code: ESMQ41

    A portable power and power quality analyzer designed for detailed diagnostics, audits, and long-term monitoring of three-phase and single-phase electrical networks. The device is intended for on-site use in industrial and outdoor environments and is integrated into a robust transport case, allowing measurements to be carried out safely directly at the location. The analyzer supports Rogowski coils, 333 mV current transformers, and current clamps, enabling current measurements up to 6000 A without disconnecting the power supply. 

  • Technical specifications

    Type: Portable power and power quality analyzer
    Model: MQ41
    Display: 3.5" IPS color
    Power supply: 12 V DC
    Communication: Ethernet – MODBUS TCP; MODBUS RS485
    Harmonic analysis: 1–50 harmonics
    Data storage: 32 GB TF (microSD) card
    Data reading via USB
    Design: integrated transport case
    Supported current sensors: Rogowski coils; 333 mV CT current transformers; current clamps
    Recommended Rogowski coils:
    100 A – MRC-16; 300 A – MRC-24; 600 A – MRC-36; 1000 A – NRC-100; 3000 A – NRC-150; 6000 A – NRC-200
    Current clamps:
    ST08 – 10 A / 100 mA / 10 A; ST08 – 10 A / 320 mV
    Voltage measurement: Direct or via VT – up to 500 kV
    Recorded parameters: Current; Voltage; Active and reactive power; Electrical energy; Power factor (cos φ); Demand; Harmonic spectrum; Phase angle; Phase balance; Frequency; Maximum and minimum values; Voltage sags and swells; Real-time waveform
    Package contents: 4 pcs voltage clips; power / communication adapter

    Functions

    Voltage and current measurement – real-time network monitoring
    Power and energy analysis – consumption and load assessment
    Harmonic analysis – identification of power quality issues
    Waveform + sag/swell – signal shape and voltage fluctuation recording
    Data logging – measurement storage and export
    MODBUS communication – integration with control systems

    Applications

    For engineers / energy specialists: Power quality and harmonic audits, fault and instability analysis
    For industrial and commercial facilities: Monitoring of production lines and transformers, analysis of critical power points
    For electricians: Commissioning, testing and diagnostic tasks, on-site load and phase checks

    Pros

    True Power Quality Analyzer
    Integrated transport case
    Waveform and event analysis
    Wide current range up to 6000 A
    MODBUS TCP / RS485 communication

    Cons

    Requires 12 V power supply
    Rogowski coils and current clamps not included
    Designed for professional use 

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Wind direction sensor | 0–360°, 16 directions of 22.5° | 12–24 V DC | RS485 Modbus RTU | for D105 pulse analyzer | smart-MAIC | T5W
    Code: T5W

    The T5W wind vane sensor detects wind direction in 16 sectors of 22.5° (value 0–15, 0 = north). It connects to the RS485 input of the smart-MAIC D105 via Modbus RTU. 12–24 V DC supply is not included.

    Price 174.05 € VAT incl.
    ( 143.84 € VAT excl. )
    Water flow sensor | up to 30 l/min | ~450 pulses/l | G1/2" (DN15) | 5 V DC | pulse input | for D105 pulse analyzer | smart-MAIC | DN15(G1/2")
    Code: DN15(G1/2")

    A turbine water flow sensor with G1/2" (DN15) connections for flows up to 30 l/min. It connects to a pulse input of the smart-MAIC D105 and gives about 450 pulses per litre. No separate supply is needed – the D105 provides 5 V.

    Price 38.53 € VAT incl.
    ( 31.84 € VAT excl. )
    TDS (dissolved solids) sensor | 0…1000 ppm | 0…2.3 V | 5 V DC | analog input | for D105 pulse analyzer | smart-MAIC | TDS Level
    Code: TDS Level

    TDS sensor for measuring dissolved salt concentration and assessing water hardness. It connects to the analog input of the smart-MAIC D105 and is powered from its 5 V terminal. It helps you see in time when filter cartridges need replacing.

    Price 52.27 € VAT incl.
    ( 43.20 € VAT excl. )
    CYKY-L 5G10 | 5×10 mm² | Copper power cable | 450/750 V | black | 1 m | Lietkabelis
    Code: 91951013

    CYKY-L 5G10 (5×10 mm²) – 450/750 V copper power cable for three-phase 400 V circuits with neutral. Solid cores, PVC insulation and sheath, suitable indoors, outdoors and in the ground. AB Lietkabelis, price per 1 m.

    Price 8.67 € VAT incl.
    ( 7.17 € VAT excl. )
    pH level sensor | pH 0…14 | 5 V DC | 80 cm cable | analog input | for D105 pulse analyzer | smart-MAIC | pH Level
    Code: pH Level

    Submersible pH sensor for measuring water acidity in pools, aquariums and water treatment systems. It connects to the analog input of the smart-MAIC D105 and is powered from its 5 V terminal. Range pH 0…14, accuracy 0.2 pH.

    Price 57.89 € VAT incl.
    ( 47.84 € VAT excl. )
  • privacy policy

    Information