Products catalog

  • Rogowski panel power analyzer | voltage and current measurement | 220 V AC | CT 1A/5A input | LCD display | 6 tariffs | MODBUS RS485 | ME337CD2

    Code: ESME337CD2

    A panel-mounted smart power analyzer designed for real-time monitoring of single-phase and three-phase electrical networks, energy control, and power quality assessment. The device supports 1A / 5A current transformers (CT) and is also compatible with Rogowski coils via appropriate sensors, allowing operation over a wide current range from 10 A to 6000 A. With harmonic analysis up to the 50th order, MODBUS RS485 communication, and a clear LCD display, the device is suitable for electrical distribution boards, industrial equipment, commercial buildings, and energy solutions where continuous power monitoring is required without internal data logging. 

  • Technical Specifications

    Type: Panel-mounted power analyzer
    Model: ME337ND2
    Installation: Fixed (panel-mounted)
    Communication: MODBUS RS485
    Power supply: 220 V AC (95–265 V AC) – auxiliary
    Harmonic analysis: up to the 50th order (real-time display)
    Tariffs: 6
    Alarms: yes
    Data logging: no
    Current input: CT current transformers: 1 A / 5 A, compatible with a wide current range via CT or Rogowski solutions
    Configurable current ranges: 10 A / 100 A / 500 A / 1000 A / 3000 A / 6000 A (software configurable)
    Current signal coefficients: 50 mV/kA @50 Hz; 85 mV/kA @50 Hz; 333 mV/kA (0–634 mV AC RMS)
    Current measurement accuracy: ±0.1% (depending on the sensor)
    Measured parameters: Current; Voltage; Active, reactive and apparent power; Power factor; Electrical energy; Phase angle and unbalance; Load; Harmonic values; Phasor diagram
    Inputs / Outputs: 1 relay output; 1 digital input; alarm functions based on set thresholds

    Functions

    Voltage and current measurement – real-time monitoring via 1A / 5A CT

    Power and energy analysis – evaluation of active, reactive power and consumption

    Harmonic analysis (up to the 50th) – detection of power quality distortions

    Phasor and unbalance analysis – assessment of phase load and balance

    Alarms and relay output – notifications when set limits are exceeded

    MODBUS RS485 communication – integration with BMS / SCADA systems

    Applications

    Engineer / energy specialist: Power and harmonic analysis, phase unbalance and load evaluation, BMS / SCADA integration via MODBUS RS485

    Industrial and commercial facilities: Continuous power network monitoring, energy consumption control, alarm signaling

    Electrician: Quick verification of voltage, current and load in panels, easy integration into existing switchboards, operation with Rogowski coils without line disconnection, use with standard 1A / 5A CT

    Advantages

    Standard 1A / 5A CT input

    Harmonic analysis up to the 50th order

    Wide current range up to 6000 A

    MODBUS RS485 communication

    High current measurement accuracy (±0.1%)

    Disadvantages

    No internal data logging

    CT current transformers not included

    Designed for fixed (panel-mounted) installation 

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Wind direction sensor | 0–360°, 16 directions of 22.5° | 12–24 V DC | RS485 Modbus RTU | for D105 pulse analyzer | smart-MAIC | T5W
    Code: T5W

    The T5W wind vane sensor detects wind direction in 16 sectors of 22.5° (value 0–15, 0 = north). It connects to the RS485 input of the smart-MAIC D105 via Modbus RTU. 12–24 V DC supply is not included.

    Price 174.05 € VAT incl.
    ( 143.84 € VAT excl. )
    pH level sensor | pH 0…14 | 5 V DC | 80 cm cable | analog input | for D105 pulse analyzer | smart-MAIC | pH Level
    Code: pH Level

    Submersible pH sensor for measuring water acidity in pools, aquariums and water treatment systems. It connects to the analog input of the smart-MAIC D105 and is powered from its 5 V terminal. Range pH 0…14, accuracy 0.2 pH.

    Price 57.89 € VAT incl.
    ( 47.84 € VAT excl. )
    CYKY-L 5G10 | 5×10 mm² | Copper power cable | 450/750 V | black | 1 m | Lietkabelis
    Code: 91951013

    CYKY-L 5G10 (5×10 mm²) – 450/750 V copper power cable for three-phase 400 V circuits with neutral. Solid cores, PVC insulation and sheath, suitable indoors, outdoors and in the ground. AB Lietkabelis, price per 1 m.

    Price 8.67 € VAT incl.
    ( 7.17 € VAT excl. )
    Water flow sensor | up to 30 l/min | ~450 pulses/l | G1/2" (DN15) | 5 V DC | pulse input | for D105 pulse analyzer | smart-MAIC | DN15(G1/2")
    Code: DN15(G1/2")

    A turbine water flow sensor with G1/2" (DN15) connections for flows up to 30 l/min. It connects to a pulse input of the smart-MAIC D105 and gives about 450 pulses per litre. No separate supply is needed – the D105 provides 5 V.

    Price 38.53 € VAT incl.
    ( 31.84 € VAT excl. )
    TDS (dissolved solids) sensor | 0…1000 ppm | 0…2.3 V | 5 V DC | analog input | for D105 pulse analyzer | smart-MAIC | TDS Level
    Code: TDS Level

    TDS sensor for measuring dissolved salt concentration and assessing water hardness. It connects to the analog input of the smart-MAIC D105 and is powered from its 5 V terminal. It helps you see in time when filter cartridges need replacing.

    Price 52.27 € VAT incl.
    ( 43.20 € VAT excl. )
  • privacy policy

    Information